Evaluation of bending properties of three layer cellular wood panels using six different structural models
2011
Iejavs, J., Forest and Wood Products Research and Development Inst., Jelgava (Latvia) | Spulle, U., Forest and Wood Products Research and Development Inst., Jelgava (Latvia) | Jakovlevs, V., Latvia Univ. of Agriculture, Jelgava (Latvia)
Invention of light weight panel with a trade mark of Dendrolight is one of the most distinguished wood industry innovations of the last decade. At present three layers cellular wood panels have wide non structural application. The aim of the research is to evaluate the bending properties of three layer cellular wood panels for structural application. There were 8 specimens manufactured with thickness 136 or 152 mm, width 300 mm and length 2,500 mm of each of the six horizontal load bearing panel structural models. Scots pine (Pinus sylvestris L.) cellular wood and solid pine wood ribs were used as internal layer of the structural panels. Cellular wood core was placed in horizontal or vertical direction. Scots pine solid wood panels and birch plywood were used as top layer material. Applied glue was polivinilacetate Cascol 3353. The most common stress type in structural subflooring panels is bending; therefore, the influence of the cellular material orientation, ribs and top layer material on the sandwich type structural panel bending strength (MOR) and stiffness (MOE) were evaluated according to LVS EN 408:2011. Extra parameters like moisture content and apparent density were determined. Cellular wood in vertical direction can be used as raw material for structural panel production. Panels with solid timber external layers, with ribs and with vertical orientation of the cellular material showed the highest MOR (35.2 N mmE-2) and MOE (11,500 N mmE-2) values. The influence of the solid wood ribs on the bending properties is directly dependent on external layer material.
اظهر المزيد [+] اقل [-]