Low voltage generator power application for heating the air flow when drying machines | Применение электроэнергии низковольтного генератора для подогрева воздушного потока при сушке машин
2019
Petrashev, A.I. | Klepikov, V.V., All-Russia Research and Development Inst. of Use of Machinery and Petroleum Products in Agriculture, Tambov (Russian Federation)
إنجليزي. It is known that the adhesion and service life of conservation coatings reduce when they are applied to the wet surfaces of agricultural machines. Improving the quality of storing and preservation of vehicles is achieved by blowing and drying surfaces with a stream of heated air. It is proposed to use a tractor with mobile equipment containing a compressor for the production of compressed air and a low voltage current generator for heating the airflow. The process of expiration air from the nozzles has been studied, and the dependence of the airflow on the compressor pressure and the diameter of the nozzle of the purge gun based on the Prandtl equation has been established. It is shown that the duration of continuous blowing machines depends on the flow of compressed air through the nozzle, the compressor capacity, and volume of the receiver and the response pressure of the telepressostat. Proposed is compressed air heater in the form of an electric spiral, placed inside at the end of the air hose. It established that at the exit from the nozzle of the purge gun the temperature of the heated airflow increases with decreasing air pressure and the length of the electric coil. The rational parameters of an air heater are determined when operating with an electric power of an autotractor generator with a voltage of 30 V: the length of the electric spiral is 3.0 m; power consumption - 210 W; air pressure - 0.4 MPa; nozzle diameter - 0.4 cm; an increase in the temperature of the air flow is up to 41 deg C at a distance of 1.5 cm from the nozzle.
اظهر المزيد [+] اقل [-]الروسية. Известно, что адгезия и срок службы консервационных покрытий снижаются при их нанесении на влажные поверхности с.-х. машин. Повышение качества консервации машин достигается за счет обдувки и сушки поверхностей потоком нагретого воздуха. Предложено использовать трактор с мобильным оборудованием, содержащим компрессор для производства сжатого воздуха и генератор тока низкого напряжения для нагрева воздушного потока. Изучен процесс истечения воздуха из сопел, и на основании уравнения Прандтля установлена зависимость расхода воздуха от давления компрессора и диаметра сопла продувочного пистолета. Показано, что длительность непрерывной обдувки машин зависит от расхода сжатого воздуха через сопло, производительности компрессора, объема ресивера и давления срабатывания телепрессостата. Предложен подогреватель сжатого воздуха в виде электрической спирали, размещенной в конце воздушного шланга. Установлено, что на выходе из сопла продувочного пистолета температура нагретого воздушного потока возрастает при уменьшении давления воздуха и длины электрической спирали. Определены рациональные параметры подогревателя воздуха при работе от электроэнергии автотракторного генератора напряжением 30 В: длина электрической спирали – 3,0 м; потребляемая мощность – 210 Вт; давление воздуха – 0,4 МПа; диаметр сопла – 0,4 см; повышение температуры воздушного потока – до 41 град. С на расстоянии 1,5 см от сопла.
اظهر المزيد [+] اقل [-]الكلمات المفتاحية الخاصة بالمكنز الزراعي (أجروفوك)
المعلومات البيبليوغرافية
تم تزويد هذا السجل من قبل Central Scientific Agricultural Library