[Modelling of distribution of salts in a tomato crop under localized irrigation] | Modelización de la distribución de sales en un suelo con cultivo de tomate bajo riego localizado
2001
Vargas, G.E. | Rodríguez Rodríguez, A. (Universidad de La Laguna, Tenerife (España). Facultad de Biología)
إنجليزي. The distribution of salinity in irrigated agricultural land was simulated using a multicomponent transfer model in variably saturated porous medium, UNSATCHEM-2D (Simunek and Suarez, 1993b). The necessary inputs for the model UNSATCHEM-2D are the concentration of the major ions (calcium, magnesium, sodium, potassium, sulfates, chlorides and nitrates), alkalinity (carbonates and bicarbonates), concentrations in adsorbed and solid phases, water content (field capacity and wilting point), bulk density and partial CO2 pressure. The absorption of water by the roots depends on the hydric potential difference between inside and outside the roots. The osmotic potential values are obtained by the model by using the osmotic coefficients and the modified equation of vanÝt Hoff, the absorption of solutes by the plant roots being considered negligible. This model was used to simulate the distribution of salts in a tomato crop on the island of Fuerteventura. The soil involved is a leptic Calcisol, the irrigation system is localized high-frequency (drip) with well-water that presents a high risk of soil salinization (CE = 7840 dS/cm) and the crop, as stated above, is tomato of the Daniela variety. 100 days after crop planting a marked accumulation of salts was simulated in the first 10 cm of the soil to a distance of 35 cm from the point of irrigation, the soil solution reaching more than 300 dS/m in the first 2 cm at the surface and quickly descending with depth. The model showed that distribution of electrical conductivity isolines at the end of the cropping period (270 days) was more homogeneous than that obtained 100 days after planting and, moreover, the zone of maximum accumulation of salts was much closer to the point of irrigation (18-20 cm). The maximum accumulation of salts at the soil surface takes place, in the 100-day simulation, in a strip situated between 30 and 40 cm from the irrigation point while, at crop end (270 days), the zone of salt accumulation is found to be closer to the point of irrigation, in a strip located between 15 and 25 cm from the watering point, due to the smaller dimensions of the water bulb.(...)
اظهر المزيد [+] اقل [-]الأسبانية؛ قشتالية. Se realiza una simulación de la distribución de la salinidad en suelos agrícolas de regadío, utilizando para ello un modelo de transporte de multicomponentes en medio poroso variablemente saturado, NSATCHEM-2D (Simunek y Suárez, 1993b). Este modelo se ha utilizado para simular la distribución de sales en un cultivo de tomates de la isla de Fuerteventura. El suelo de cultivo es un Calcisol léptico, el sistema de riego es localizado de alta frecuencia (goteo) con aguas de pozo que presentan un alto riesgo de salinización del suelo (CE = 7840 micro S/cm) y el cultivo, se ha dicho, es tomate de la variedad Daniela. El modelo simula que a los 100 días de implantado el cultivo se produce una fuerte acumulación salina en los primeros 10 cm del suelo a unos 35 cm de distancia del gotero, llegando a alcanzar la solución edáfica más de 300 dS/m en los primeros 2 cm superficiales y descendiendo rápidamente con la profundidad. La distribución de isolíneas de conductividad eléctrica al finalizar el cultivo (270 días), muestra una distribución más homogénea de la salinidad que la obtenida para los 100 días de cultivo y además la zona de máxima acumulación de sales aparece mucho más cerca del punto de goteo (18-20 cm). Según el modelo, la máxima acumulación de sales en la superficie del suelo tiene lugar, en la simulación de 100 días, en una franja situada entre 30 y 40 cm de distancia al gotero mientras que al final del cultivo (270 días), la zona de acumulación salina se desplaza hacia el gotero, en una franja situada entre 15 y 25 cm del punto de goteo, debido a las menores dimensiones del bulbo hídrico. El modelo también predice un desplazamiento de la zona de acumulación de sales hacia el punto de goteo, y que esta franja se sitúa a unos 8-11 cm (depende de la época) alejada de la zona, donde la humedad en la superficie del suelo alcanza el punto de marchitamiento.(...)
اظهر المزيد [+] اقل [-]