Adsorption of Iron(II) from Acid Mine Drainage Contaminated Groundwater Using Coal Fly Ash, Coal Bottom Ash, and Bentonite Clay

Orakwue, Emelda Obianuju; Asokbunyarat, Varinporn; Rene, Eldon R.; Lens, P. N. L.; Annachhatre, Ajit

Adsorption of Iron(II) from Acid Mine Drainage Contaminated Groundwater Using Coal Fly Ash, Coal Bottom Ash, and Bentonite Clay

2016

Orakwue, Emelda Obianuju | Asokbunyarat, Varinporn | Rene, Eldon R. | Lens, P. N. L. (Piet N. L.) | Annachhatre, Ajit

Acid mine drainage (AMD) is a persisting environmental problem and a grievous nuisance in the mining sector. In this study, iron (Fe(II)) removal was tested in AMD samples collected from the Enugu Okpara abandoned coal mine (Nigeria), having iron concentrations of ∼1300 mg/l. Digestion, toxicity characteristic leaching procedure (TCLP), and batch adsorption tests using coal bottom ash (BA), bentonite clay (BC), and coal fly ash (FA) were performed. Apart from elucidating the effects of adsorbent dose and initial Fe(II) concentrations on the maximum adsorption capacity (q ₑ) of the adsorbents, the experimental data were also fitted to well-known adsorption isotherms and kinetic models. The results from batch tests showed that the optimum adsorbent dosages for BA, BC, and FA were found to be 3, 4, and 4 g per 100 ml, respectively. Among the different adsorption isotherm models tested, the Temkin model fitted the experimental data well for Fe(II) removal. Results from kinetic analysis showed that the Fe(II) removal efficiency increased with an increase in the contact time and then remained almost constant after 30 min for the three tested adsorbents.

اظهر المزيد [+]