Effect of bending and padding on the electromagnetic performance of a laser-cut fabric patch antenna
2019
Mukai, Yusuke | Bharambe, Vivek T | Adams, Jacob J | Suh, Minyoung
A fabrication and characterization procedure is detailed for a flexible planar antenna integrated into textiles by interfacing thin metal-coated fabric sheets on a polyester fabric substrate. From the full-wave electromagnetic simulations and measurements, it is observed that the low dielectric dissipation in the porous woven polyester enables the fabric antenna to achieve a high gain of 8.4 dBi. It is comparable to other antennas fabricated with engineered substrates of low-loss polymer composites. Using this antenna, the impact of cylindrical concave bending deformation is observed in terms of the impedance matching and radiation performance. The simulated and measured results agree reasonably well. A 1.2% frequency shift is observed when the antenna is bent concavely along its length, while bending along its width showed only a marginal impact. On the other hand, the gain is reduced by as much as 1.0 and 0.5 dB when the antenna is bent along its length and width, respectively. The impact of padding layers was also investigated when placed above the radiating patch and below the ground plane. Because the textile padding layers have complex permittivity closer to air due to their highly porous structure, it is expected to observe only small influence on the radiation performance. However, the simulations and measurements show that padding the radiating patch lowers both the operating frequency and the realized gain by up to 1.6% and by up to 0.9 dB, respectively, due to dielectric loading and dissipation.
اظهر المزيد [+] اقل [-]الكلمات المفتاحية الخاصة بالمكنز الزراعي (أجروفوك)
المعلومات البيبليوغرافية
تم تزويد هذا السجل من قبل National Agricultural Library
