Activation of peroxydisulfate by ball-milled α-FeOOH/biochar composite for phenol removal: Component contribution and internal mechanisms

Persulfate-based advanced oxidation process is considered as a promising technology for the degradation of phenol, where efficient, cost effective, and green methods with high peroxydisulfate (PS) activation capacity is of increasing demand. In this work, an in-situ liquid phase precipitation combined with ball milling method was applied for the synthesized of α-FeOOH/biochar, as be the PS activator for phenol degradation. Results showed that the ball-milled α-FeOOH and red pine wood biochar prepared at 700 °C (BM-α-FeOOH/PBC700) exhibited the highest catalytic property with PS for phenol oxidation (a phenol removal rate of 100%), compared with the BM-α-FeOOH (16.0%) and BMPBC700 (66.3%). The presence of intermediate products such as hydroquinone and catechol, and total organic carbon (TOC) removal rate (88.9%) proved the oxidation of phenol in the BM-α-FeOOH/PBC700+PS system. The characterization results showed that the functional groups (e.g., CO, C–O, Fe–O, and Si–O), the dissolved organic matter (DOM) in biochar, the loading of Fe element, and higher degree of graphitization and defect structures, contributed to the activation of PS to form free radicals (i.e., SO₄·⁻, ·OH, ·O₂⁻, and hVB⁺) for phenol oxidation, of which, SO₄·⁻ and ·OH account for 72.1% of the phenol removal rate. The specific contribution to the PS activation for phenol oxidation by each part of the materials was calculated based on the “whole to part” experiment. The contribution of DOM, acid-soluble substance, and carbon matrix and basal part in BM-α-FeOOH/PBC700 were 6.0%, 40.9%, and 53.1%, respectively. The reusability experiments of BM-α-FeOOH/PBC700 demonstrated that the composite was relatively stable after four cycles of reuse. Among three co-existing anions (NO₃⁻, Cl⁻, and HCO₃⁻), HCO₃⁻ played the most significant inhibition effects on phenol removal through reducing the phenol removal rate from 89.6% to 77.9%. This work provides guidance for the design of high active and stable carbon materials that activate PS to remove phenol.