Mixing of Acid Rock Drainage with Alkaline Ash Leachates—Fate and Immobilisation of Trace Elements

Bäckström, Mattias; Sartz, Lotta

Mixing of Acid Rock Drainage with Alkaline Ash Leachates—Fate and Immobilisation of Trace Elements

2011

Bäckström, Mattias | Sartz, Lotta

Acid rock drainage (ARD) often contains ferrous iron, sulphate and high concentrations of trace elements detrimental to the environment. Future costs will be enormous if the problem is not treated today. Simple and cost-effective methods for remediation of historical mine sites are therefore desired. In this study, three mine waters were mixed with alkaline ash leachates, and the fate of trace elements from both the mine waters (Cd, Cu, Pb, Zn, Ni and Co) and the ash leachates (Cr and Mo) was studied. Addition of ash water precipitates hydrous ferric oxides (HFO) and hydrous aluminium oxides (HAO) induced trace element sorption and coprecipitation. Composition of the formed HFO/HAO mix determines efficiency of the sorption and the relative order of sorption for different trace elements. Sorption occurred much earlier (often one pH unit or more) in a system with high iron concentrations compared to systems with lower iron concentrations. Removal of cadmium and zinc was low, below pH 8, if the amount of precipitates was low. Using ash for generation of alkaline water may be a problem with regard to chromium and molybdenum. This study shows that it is possible to avoid problems with molybdenum by keeping the final pH around 7, and chromium(VI) from the ash water will be reduced into chromium(III) and precipitated as the hydroxide in the presence of iron(II). Results imply that it is possible to also use fly ashes in alkaline leach beds in order to neutralize ARD followed by precipitation and sorption of trace elements.

اظهر المزيد [+]