Electrochemical Degradation of the Reactive Red 141 Dye Using a Boron-Doped Diamond Anode
2013
Aquino, José Mario | Rocha-Filho, Romeu C. | Rodrigo, Manuel A. | Sáez, Cristina | Cañizares, Pablo
The electrochemical degradation of the Reactive Red 141 azo dye was done using a one-compartment filter-press flow cell with a boron-doped diamond anode. The response surface methodology (with a central composite design) was used to investigate the effect of current density (10–50 mA cm⁻²), pH (3–11), NaCl concentration ([NaCl]) (0–2.34 g L–¹), and temperature (15–55 °C) on the system’s performance. The charge required for 90 % decolorization (Q ⁹⁰), the fraction of chemical oxygen demand removal after 6 min of electrolysis (COD⁶), and the fraction of total organic carbon removal after 90 min of electrolysis (TOC⁹⁰) were used to model the obtained results. The lowest values of Q ⁹⁰ were attained at pH <4 in the presence of higher values of [NaCl] (>1.5 g L⁻¹), due to the electrogeneration of active chlorine, present mainly as HClO. The value of COD⁶ was not affected by the solution pH, but increased with [NaCl] up to 1.5 g L⁻¹. Higher temperatures (>40 °C) led to a decrease in COD⁶, as a consequence of side reactions. Higher values of TOC⁹⁰, which can be reached only with strong oxidants (such as ·OH and Cl·), were efficiently attained at low [NaCl] values (<0.7 g L⁻¹) in acidic solutions that inhibit the formation of ClO₃ ⁻ and ClO₄ ⁻. Finally, the obtained results allow inferring that most probably the mineralization of the dye starts with an attack on the chromophore group, followed by the degradation of intermediate species.
اظهر المزيد [+] اقل [-]الكلمات المفتاحية الخاصة بالمكنز الزراعي (أجروفوك)
المعلومات البيبليوغرافية
تم تزويد هذا السجل من قبل National Agricultural Library
