Polypropylene-elastomer (TPO) nanocomposites: 1. Morphology
2011
Tiwari, Rajkiran R. | Paul, D.R.
PP/PP-g-MA/MMT/elastomer nanocomposites were prepared in a twin-screw extruder at fixed 30 wt% elastomer and 0–7 wt% MMT content. The ratio of maleated polypropylene, PP-g-MA and organoclay was maintained at 1. Elastomer particle size and shape in the presence of MMT were evaluated for three different molecular weight grades of polypropylene (PP) and five different ethylene-co-octene elastomers (EOR) with different melt flow index (MFI) and octene contents. The MMT particles are located exclusively in the PP phase in the PP/PP-g-MA/MMT/EOR nanocomposites as seen from TEM images. Injection molded nanocomposite samples show significant decreases in elastomer particle size and increases in elastomer aspect ratio and particle density compared to as-extruded or pelletized samples. The elastomer particle size decreased significantly with increased MMT content and the molecular weight of PP. Low molecular weight PP based nanocomposite showed a greater reduction in elastomer particle size compared to medium and high molecular weight PP based nanocomposites. Elastomers having MFI in the range of 0.5–1.0 gave minimum elastomer particle sizes in the PP/PP-g-MA/MMT/EOR nanocomposite. The elastomer particles were deformed during injection molding leading to an increase in their aspect ratio. The nanocomposites containing high octene content elastomer gave smaller elastomer particle size and higher elastomer aspect ratios compared to nanocomposites containing low octene content elastomer.
اظهر المزيد [+] اقل [-]الكلمات المفتاحية الخاصة بالمكنز الزراعي (أجروفوك)
المعلومات البيبليوغرافية
تم تزويد هذا السجل من قبل National Agricultural Library