Effect of Co-Dopants in TiO2–SiO 2 Thin films on the Formaldehyde Degradation
2012
Kaewtip, Charuwan | Chadpunyanun, Pornpimon | Boonamnuayvitaya, Virote
Titanium dioxide (TiO2)–silicon dioxide (SiO2) thin films were synthesized using the peroxo titanic acid approach (PTA) combined with the sol–gel method at low temperature around 100°C. The effects of type and amount of dopants of ferric (Fe3+) or thiourea (N-S) and co-dopants of Fe3+ and N-S on the films physicochemical properties and on the photocatalytic degradation of the methylene blue and formaldehyde under UV and visible light irradiation were investigated. Physicochemical properties of photocatalysts were characterized by X-ray diffraction, transmission electron microscopy, wavelength-dispersive X-ray fluorescence spectrometry, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and UV–Vis spectroscopy. The results showed that the TiO2 crystal phases obtained from this method were exclusively anatase and the needle-like crystals have an average diameter of 10–25 nm. Compared with the single dopant of 1.0 wt.% Fe3+ or 0.125 wt.% N-S that was the optimal concentration for photocatalytic degradation of methylene blue and formaldehyde, the co-dopants of 0.125 wt.% N-S + 1.0 wt.% Fe3+ furthermore increased the degradation efficiency. Co-dopants of 0.125 wt.% N-S + 1.0 wt.% Fe3+ in TiO2–SiO2 films were considered to play synergistic roles in narrowing TiO2 band gap resulting in the higher methylene blue and formaldehyde degradation efficiency. Since the crystal grain size of TiO2–SiO2 films synthesized by the PTA method is small, in the visible light region, the high transmittance was attainable to 80% with no-doped and dropped to 50–60% with doped thin films.
اظهر المزيد [+] اقل [-]الكلمات المفتاحية الخاصة بالمكنز الزراعي (أجروفوك)
المعلومات البيبليوغرافية
تم تزويد هذا السجل من قبل National Agricultural Library
