Purpose. Studying the norm of reaction of vegetable bean varieties depending on the feeding area, namely the row width. Methods. Field, biometriс, statistical, laboratory ones. Results. ‘Karadag’ (k), ‘Windsorski’, ‘Bartoli’ and ‘Karestino’ varieties were trialed during 2012–2014. In the course of trial the peculiarities were studied concerning the formation of plant height, the number of beans and seed weight of vegetable bean varieties depending on the row width in the phase of technical maturity of the beans. It was found that differential of plant height growth was changed to a greater degree in ‘Windsorsky’ variety (+9,3 cm for every 10 cm) in case of row width narrowing from 60 to 20 cm. ‘Windsorsky’ variety had the largest number of beans and the highest seed weight per plant – 8.9 beans and 14.44 g respectively. Seeds of ‘Karestino’ variety were large, their weight per plant made up 10.56 g, the number of beans totaled to 6.6. Conclusions. The maximum influence of feeding area on a height of plants was found in the phase of technical maturity of beans. The largest increase in plant height for every 10 cm of row spacing was observed in ‘Karadag’ and ‘Windsorski’ varieties. The number of beans also is depended on feeding area. With its reducing, the number of beans and their weight per plant was also reduced in all variants. The largest number of beans and the highest seed weight per plant were in variants with feeding area of 1200 cm2 (row width was 60 cm).

Purpose. Studying the norm of reaction of vegetable bean varieties depending on the feeding area, namely the row width. Methods. Field, biometriс, statistical, laboratory ones. Results. ‘Karadag’ (k), ‘Windsorski’, ‘Bartoli’ and ‘Karestino’ varieties were trialed during 2012–2014. In the course of trial the peculiarities were studied concerning the formation of plant height, the number of beans and seed weight of vegetable bean varieties depending on the row width in the phase of technical maturity of the beans. It was found that differential of plant height growth was changed to a greater degree in ‘Windsorsky’ variety (+9,3 cm for every 10 cm) in case of row width narrowing from 60 to 20 cm. ‘Windsorsky’ variety had the largest number of beans and the highest seed weight per plant – 8.9 beans and 14.44 g respectively. Seeds of ‘Karestino’ variety were large, their weight per plant made up 10.56 g, the number of beans totaled to 6.6. Conclusions. The maximum influence of feeding area on a height of plants was found in the phase of technical maturity of beans. The largest increase in plant height for every 10 cm of row spacing was observed in ‘Karadag’ and ‘Windsorski’ varieties. The number of beans also is depended on feeding area. With its reducing, the number of beans and their weight per plant was also reduced in all variants. The largest number of beans and the highest seed weight per plant were in variants with feeding area of 1200 cm2 (row width was 60 cm).

The article shows experimental data of interline hybrids of sugar beet on the basis of weight of 1000 seeds, genetic determination of characteristic based on the method of Hayman and topcrossed polytested crossbreeding is established, their comparison is made. It also highlights valuable hybrid combinations and valuable for combining pollinating lines used in the breeding to enhance properties of sowing seeds.

The article shows experimental data of interline hybrids of sugar beet on the basis of weight of 1000 seeds, genetic determination of characteristic based on the method of Hayman and topcrossed polytested crossbreeding is established, their comparison is made. It also highlights valuable hybrid combinations and valuable for combining pollinating lines used in the breeding to enhance properties of sowing seeds.

Purpose. The objective of this study was to evaluate the morphological parameters of Lycium spp. seeds from the collections in M. M. Hryshko National Botanical Garden (NBS) NAS of Ukraine. Methods. Cultivars and varieties of three Lycium species (Lycium barbarum, L. chinense, L. truncatum) were studied in the period from 2016 till 2019. The following morphometric measurments were conducted: seeds weight, seeds length, seeds width and index of seeds shape. Basic statistical analyses were performed using PAST 2.17. Hierarchical cluster analyses of similarity between genotypes were computed on the basis of the Bray-Curtis similarity index. Correlation between traits was determined using the Pearson correlation coefficient. Results. Cultivars and varieties of different species of Lycium varied in weight, shape, and size of seeds. Seed weight varied from 0.54 to 3.54 mg, seed length from 1.90 to 3.06 mm, seed width from 1.43 to 2.53 mm. The shape indexes of seeds were found ranging from 0.73 to 0.80. The analysis of coefficient of variation showed the difference of variability in morphometric characteristics between some Lycium spp. cultivars and varieties. The most variable features: seeds weight (8.51–28.22%) and seeds length (5.07–24.81%) are important parameters for selection. The use of cluster analysis made it possible to establish the similarity between the species of the studied Lycium species. Conclusions. Diagnostic signs by seed morphometry for differentiation of Lycium species were revealed. The analysis of coefficient of variation showed the difference of variability in morphometric characteristics between some Lycium cultivars and varieties. The most variable characteristics of the studied genotypes were seed weight and length, which are important parameters for selection because they determine the pulp content and number of seeds, as well as the ratio of these parameters between them. It is through variability that promising varieties with low seed weight and length can be selected, Due to securing them later vegetatively.

Purpose. The objective of this study was to evaluate the morphological parameters of Lycium spp. seeds from the collections in M. M. Hryshko National Botanical Garden (NBS) NAS of Ukraine.Methods. Cultivars and varieties of three Lycium species (Lycium barbarum, L. chinense, L. truncatum) were studied in the period from 2016 till 2019. The following morphometric measurments were conducted: seeds weight, seeds length, seeds width and index of seeds shape. Basic statistical analyses were performed using PAST 2.17. Hierarchical cluster analyses of similarity between genotypes were computed on the basis of the Bray-Curtis similarity index. Correlation between traits was determined using the Pearson correlation coefficient.Results. Cultivars and varieties of different species of Lycium varied in weight, shape, and size of seeds. Seed weight varied from 0.54 to 3.54 mg, seed length from 1.90 to 3.06 mm, seed width from 1.43 to 2.53 mm. The shape indexes of seeds were found ranging from 0.73 to 0.80. The analysis of coefficient of variation showed the difference of variability in morphometric characteristics between some Lycium spp. cultivars and varieties. The most variable features: seeds weight (8.51–28.22%) and seeds length (5.07–24.81%) are important parameters for selection. The use of cluster analysis made it possible to establish the similarity between the species of the studied Lycium species.Conclusions. Diagnostic signs by seed morphometry for differentiation of Lycium species were revealed. The analysis of coefficient of variation showed the difference of variability in morphometric characteristics between some Lycium cultivars and varieties. The most variable characteristics of the studied genotypes were seed weight and length, which are important parameters for selection because they determine the pulp content and number of seeds, as well as the ratio of these parameters between them. It is through variability that promising varieties with low seed weight and length can be selected, Due to securing them later vegetatively. | Мета. Оцінити морфометричні показники насіння Lycium spp. колекції Національного ботанічного саду імені М. М. Гришка (НБС) НАН України.Методи. Упродовж 2016–2019 рр. досліджено 21 генотип (10 сортів і 11 форм) трьох видів (Lycium barbarum, L. chinense, L. truncatum). Установлено морфометричні показники насіння (маса, довжина, ширина та індекс форми). Статистичний аналіз виконували за допомогою PAST 2.17. Ієрархічний кластерний аналіз подібності генотипів здійснено за індексом подібності Брей-Кертіса. Наявніть зв’язків між параметрами встановлювали за коефіцієнтом кореляції Пірсона.Результати. Сорти та форми різних видів рослин Lycium варіювали за масою, розміром та формою насіння. Морфометричні параметри насіння були такими: маса – від 0,54 до 3,54 мг, довжина – від 1,90 до 3,06 мм, ширина – від 1,43 до 2,53 мм. Величина індексу форми насіння становила від 0,73 до 0,80. Аналіз коефіцієнта варіації показав різну мінливість морфометричних характеристик сортів та форм різних видів Lycium. Наймінливішою є маса насіння (8,51–28,22%) та його довжина (5,07–24,81%), які є важливими параметрами для селекції. Використання кластерного аналізу дало змогу встановити генетичні зв’язки між сортами й формами Lycium та розподілити їх у два основних кластери.Висновки. Виявлено діагностичні ознаки морфометричних параметрів насіння для ідентифікації видів Lycium. Аналіз коефіцієнта варіації показав мінливість морфомет­ричних характеристик між деякими сортами та формами Lycium. Наймінливішими параметрами досліджуваних генотипів були маса та довжина насіння. Останні є важливими для селекції, оскільки від них залежить уміст м’якушу та кількість насіння, а також співвідношення цих параметрів між ними. Завдяки мінливості можна дібрати перспективні сорти з невеликими масою та довжиною насіння, закріпивши їх потім вегетативно.

Purpose. The objective of this study was to evaluate the morphological parameters of Lycium spp. seeds from the collections in M. M. Hryshko National Botanical Garden (NBS) NAS of Ukraine. Methods. Cultivars and varieties of three Lycium species (Lycium barbarum, L. chinense, L. truncatum) were studied in the period from 2016 till 2019. The following morphometric measurments were conducted: seeds weight, seeds length, seeds width and index of seeds shape. Basic statistical analyses were performed using PAST 2.17. Hierarchical cluster analyses of similarity between genotypes were computed on the basis of the Bray-Curtis similarity index. Correlation between traits was determined using the Pearson correlation coefficient. Results. Cultivars and varieties of different species of Lycium varied in weight, shape, and size of seeds. Seed weight varied from 0.54 to 3.54 mg, seed length from 1.90 to 3.06 mm, seed width from 1.43 to 2.53 mm. The shape indexes of seeds were found ranging from 0.73 to 0.80. The analysis of coefficient of variation showed the difference of variability in morphometric characteristics between some Lycium spp. cultivars and varieties. The most variable features: seeds weight (8.51–28.22%) and seeds length (5.07–24.81%) are important parameters for selection. The use of cluster analysis made it possible to establish the similarity between the species of the studied Lycium species. Conclusions. Diagnostic signs by seed morphometry for differentiation of Lycium species were revealed. The analysis of coefficient of variation showed the difference of variability in morphometric characteristics between some Lycium cultivars and varieties. The most variable characteristics of the studied genotypes were seed weight and length, which are important parameters for selection because they determine the pulp content and number of seeds, as well as the ratio of these parameters between them. It is through variability that promising varieties with low seed weight and length can be selected, Due to securing them later vegetatively.

The article presents results of characteristics studying for generative and vegetative parts of soft winter wheat in the conditions of autumn moisture shortage and in the conditions of optimal moisture supply. During the period of studies a dramatic difference of the levels of generative and vegetative parts of plants has been observed. As a decreased level of characteristics development has been noted, so its increasing, in particular, among the varieties of generative part. within 7.2% (thousand seed weight) to 42.6% (seed weight per ear). It is found that efficient development of generative organs is subject to variety bushing capacity, in particular at spring. The article also shows that stress conditions of autumn period influence late emergence of seedlings; however, that goes along increased level of some characteristics development at generative part. Obviously, during such years the selection of breeding material as per ear yield would not be efficient. The article, for the purpose of excluding negative consequences of selection, pays special attention to such characteristics as that not affected by stress environmental conditions. This indicates genetic stability of those characteristics, so their use as marker characteristics in yield specific breeding is advised.

The article presents results of characteristics studying for generative and vegetative parts of soft winter wheat in the conditions of autumn moisture shortage and in the conditions of optimal moisture supply. During the period of studies a dramatic difference of the levels of generative and vegetative parts of plants has been observed. As a decreased level of characteristics development has been noted, so its increasing, in particular, among the varieties of generative part. within 7.2% (thousand seed weight) to 42.6% (seed weight per ear). It is found that efficient development of generative organs is subject to variety bushing capacity, in particular at spring. The article also shows that stress conditions of autumn period influence late emergence of seedlings; however, that goes along increased level of some characteristics development at generative part. Obviously, during such years the selection of breeding material as per ear yield would not be efficient. The article, for the purpose of excluding negative consequences of selection, pays special attention to such characteristics as that not affected by stress environmental conditions. This indicates genetic stability of those characteristics, so their use as marker characteristics in yield specific breeding is advised.

Purpose. To study biological characteristics of growth and development of middle-early soybean varieties and create a model of phenotype productivity. Methods. Special and gene­ral techniques for studies. Results. Optimal productivity of plants is forming merely at the expense of efficient ratio of all the elements of their structure. It often happens that in case of underdevelopment of one of the structure components yield to some extent can be offset by better development of other elements. Eight indicators were defined which make the largest contribution to the productivity trait of a variety: seed weight per plant, total number of branches, number of nodes per plant, number of pods per plant, number of seeds per plant, number of flowers, plant height, 1000 kernel weight. The first four indicators provided most of the total contribution to a trait of seed weight per plant. Model building was based on hierarchy of productivity traits display in ontogenesis and compliance of their development in organogenesis. The model consists of two modules of traits – resulting and some componental showing phenotypic realization of the genetic formula. It was found that the plant height significantly influence the number of nodes per plant (r = 0,76), and the number of pods per plant (r = 0,43) depends on this trait. In addition, correlation based on the research was obtained between the number of flowers per plant and plant height (r = 0,35), and number of nodes (r = 0,76). It was established that the number of flowers per plant determines the development of pods on the plant so it is quite strongly correlated with this trait (r = 0,99). Conclusions. It was determined that the number of pods per plant and the number of seeds per plant have a very strong correlation (r = 0,96). Besides, such trait as the number of seeds per plant has a strong relationship with the seed weight per plant (r = 0,79).

Purpose. To study biological characteristics of growth and development of middle-early soybean varieties and create a model of phenotype productivity. Methods. Special and gene­ral techniques for studies. Results. Optimal productivity of plants is forming merely at the expense of efficient ratio of all the elements of their structure. It often happens that in case of underdevelopment of one of the structure components yield to some extent can be offset by better development of other elements. Eight indicators were defined which make the largest contribution to the productivity trait of a variety: seed weight per plant, total number of branches, number of nodes per plant, number of pods per plant, number of seeds per plant, number of flowers, plant height, 1000 kernel weight. The first four indicators provided most of the total contribution to a trait of seed weight per plant. Model building was based on hierarchy of productivity traits display in ontogenesis and compliance of their development in organogenesis. The model consists of two modules of traits – resulting and some componental showing phenotypic realization of the genetic formula. It was found that the plant height significantly influence the number of nodes per plant (r = 0,76), and the number of pods per plant (r = 0,43) depends on this trait. In addition, correlation based on the research was obtained between the number of flowers per plant and plant height (r = 0,35), and number of nodes (r = 0,76). It was established that the number of flowers per plant determines the development of pods on the plant so it is quite strongly correlated with this trait (r = 0,99). Conclusions. It was determined that the number of pods per plant and the number of seeds per plant have a very strong correlation (r = 0,96). Besides, such trait as the number of seeds per plant has a strong relationship with the seed weight per plant (r = 0,79).

Purpose. To evaluate pea plants productivity and determine the degree of correlation among the main agronomic characters in pea varieties. Methods. Structural and statistical analysis. Results. Evaluation of pea samples in terms of indices of plant productivity elements level based on correlation analysis and single-factor indices appliance provided insight into the ratio of one trait share per unit of another one. It was defined that some correlations among the elements of productivity was not only moderate and weak, but they also changed their sign that could be the evidence of growth conditions influence on structural relationships bet­ween some traits and, consequently, redistribution of their contributions to the formation of variety productivity. Positive and very close relationship of many traits was revealed, particularly between plant height and the height of the plant up to the first bean, the number of nodes and the number of sterile nodes (r = 0,95–0,97). Methodological aspects of the variety model creation were considered, that may be useful not only in pea breeding but also for improving the techno­logy of its cultivation. Conclusions. Correlation relationships were established between the number of beans and the number of fruiting nodes and the number of carpophores containing 2 beans (r = 0,86–0,88), seed mass and plant mass (r = 0,81), the number of seeds per plant and plant mass and seed mass per plant (r = 0,78–0,81), the number of certified seeds and the number of seeds per plant (r = 0,84), the average number of beans per fertile node and the number of carpophores containing 2 beans (r = 0,74) that makes it possible to use them in assessing the productivity of plants.

Мета. Проаналізувати тенденції виробництва сої культурної в світі та виявити їх вплив на ринок сортів сої культурної в Україні. Виявити динаміку подачі та реєстрації заявок на включення до Державного реєстру сортів рослин, придатних для поширення в Україні. Порівняти урожайність сої культурної у лідерів глобального ринку сої з урожайністю сої культурної, що знаходиться у виробництві в Україні. Висвітлити інформацію щодо кращих за урожайністю нових сортів сої культурної, які включені до Державного реєстру сортів рослин, придатних для поширення в Україні. Методи. Аналітичний, математичний, статистичний, графічний. Результати. Виявлено помітний вплив тенденцій на глобальному ринку сої на динаміку виробництва цієї культури в Україні та скорочення у десятки разів обсягів відставання виробництва сої культурної в Україні порівняно із світовими лідерами в десятки разів. Тенденції приросту виробництва співпадають з тенденціями лідерів глобального ринку сої США, Бразилії та Аргентини. Визначено вплив зростання виробництва на процес реєстрації нових сортів сої культурної у Реєстрі сортів рослин України. З’ясовано, що тренд зростання кількості поданих заявок носить поліноміальний характер. Встановлено, що найбільша кількість сортів сої культурної, що проходила кваліфікаційну експертизу мала українське походження. Вивчено сорти іноземного походження з Канади, Франції, Австрії, США, Німеччини, Аргентини, Кіпру, Польщі, Республіки Сербія, Румунії, Республіки Хорватії, Чеської Республіки, Швейцарії. Визначено нові сорти сої культурної, які мали найвищу врожайність за період кваліфікаційної експертизи з 2010 по 2018 рік. Висновки. Темпи приросту виробництва сої культурної в Україні мають позитивну динаміку. В Реєстрі сортів рослин України переважають сорти українського походження. Середній рівень урожайності сортів сої культурної за 2010–2018 роки відповідає середній врожайності цієї культури у світі. Максимальну врожайність серед сортів, які проходили кваліфікаційну експертизу сортів рослин у період з 2010 по 2018 рік, проявили сорти: ‘Silesia’ французького походження, ‘Естафета’, ‘Терек’, ‘Авантюрин’ українського та сорт канадського походження ‘Kofu’.

A stabilizing (directed) selection has created a donor of short stem for winter rye (Secale cereale L.), plant height of which ranged from 50 to 60 cm. The plant height kept symmetry of its distribution curve and the frequency accumulation in central classes (positive excess). For the first time a symbolic designation to new short-stem related Hl-2Hl-2 allele and the donor name (Gnome 2) were proposed. 28 years of stabilizing selection showed that 57% of overall genetic variability of plant height resulted from adaptive genes available for directed selection by phenotype, and 43% from dominant and epistatic factors that predetermines the expression heterosis effect. Gnome 2 donor proved to have genetic additive correlation between the pants height and number of flows per ear, ear length, weight of seeds per plant , 100 seeds weight per plant; to have reverse correlation with ear density seeds weight per ear. The height of original parent components have displayed direct additive correlation with number of flowers per ear and reverse with the ear density. The additive correlation component directly exposes «genuine» impact of parental plants on the expression of the characteristics indicated among the offspring Productive bushing of parental plants, seed weight per plant directly, and seed size (100 seeds weight) indirectly, respectively, influence the height of offspring pants. The reverse additive correlation between the parents height and 100 seeds weight in the offspring is caused by pleiotropic effect of the genes impact thus enabling to combine the desirable characteristics in one genotype. Productive bushing is by 54% due to the impact of general genetic factors among the above, in particular, 30% due to that additive, 24 due to non-additive factors. The concept of genetic improvements for productive bushing of the Gnome 2 rye implies utilization of additive effect through the directed selection, as well as application of breeding techniques for controlling the effect of heterosis caused by the genes of dominant and epistatic impact. The selection paradigm requires simultaneous genotypes selection with immediate examination of the selection results by offspring while in parallel to develop inbred lines, combining these afterwards evaluating general and specific combining ability by productive bushing. It is also to be noted that the productive bushing essentially depends on the environmental conditions, which significantly corrects the implementation of productivity potent, thereby the issue of agronomical conditions aimed at extending the expression of characteristic in question remains.

A stabilizing (directed) selection has created a donor of short stem for winter rye (Secale cereale L.), plant height of which ranged from 50 to 60 cm. The plant height kept symmetry of its distribution curve and the frequency accumulation in central classes (positive excess). For the first time a symbolic designation to new short-stem related Hl-2Hl-2 allele and the donor name (Gnome 2) were proposed. 28 years of stabilizing selection showed that 57% of overall genetic variability of plant height resulted from adaptive genes available for directed selection by phenotype, and 43% from dominant and epistatic factors that predetermines the expression heterosis effect. Gnome 2 donor proved to have genetic additive correlation between the pants height and number of flows per ear, ear length, weight of seeds per plant , 100 seeds weight per plant; to have reverse correlation with ear density seeds weight per ear. The height of original parent components have displayed direct additive correlation with number of flowers per ear and reverse with the ear density. The additive correlation component directly exposes «genuine» impact of parental plants on the expression of the characteristics indicated among the offspring Productive bushing of parental plants, seed weight per plant directly, and seed size (100 seeds weight) indirectly, respectively, influence the height of offspring pants. The reverse additive correlation between the parents height and 100 seeds weight in the offspring is caused by pleiotropic effect of the genes impact thus enabling to combine the desirable characteristics in one genotype. Productive bushing is by 54% due to the impact of general genetic factors among the above, in particular, 30% due to that additive, 24 due to non-additive factors. The concept of genetic improvements for productive bushing of the Gnome 2 rye implies utilization of additive effect through the directed selection, as well as application of breeding techniques for controlling the effect of heterosis caused by the genes of dominant and epistatic impact. The selection paradigm requires simultaneous genotypes selection with immediate examination of the selection results by offspring while in parallel to develop inbred lines, combining these afterwards evaluating general and specific combining ability by productive bushing. It is also to be noted that the productive bushing essentially depends on the environmental conditions, which significantly corrects the implementation of productivity potent, thereby the issue of agronomical conditions aimed at extending the expression of characteristic in question remains.