Purpose. To investigate features of commercial head quality formation in varieties of cutting lettuce (Lactuca sativa var. capitata L.) for different growing methods. To study the influence of growing methods for cutting lettuce plants on the weight of commercial heads, indices of yield and quality of freshly harvested products. Methods. Field study, laboratory testing and statistical evaluation. Results. The results of studying peculiarities of head formation in such cutting lettuce varieties as ‘Godar’ (control), ‘Smuhlianka’, ‘Olzhych’ and ‘Dyvohrai’ were shown. Based on the results of phenological observations, the duration of interstage periods of growth and development of cutting lettuce plants was determined for the different growing methods. The model of cutting lettuce of capitata variety for different growing methods was presented in terms of biochemical parameters (content of dry matter, vitamin C, nitrates, amount of sugars). The influence of growing methods for cutting lettuce plants on the commercial head weight, indices of yield and quality of freshly harvested products was studied. Obtained results confirmed that in early ripening varie­ti­es the heads were smaller (150 g) and not dense, in late ripening varieties they were large and dense, weight was 150–500 g. Freshly harvested commercial products of head lettuce in case of seedling cultivation was characterized by a slight increase in dry matter content by 0.15–0.29%. The corresponding pattern was observed for the total sugar content. Its amount was slightly higher: 1.3–1.9% in case of direct sowing and 1.6–1.9% – for seedlings cultivation. The content of ascorbic acid (vitamin C, mg/100 g) was the highest in the ‘Dyvohrai’ variety despite of the method of growing. The largest quantity of nitrates in lettuce heads was in the inner stem (480 mg/kg), while in the middle of the head it was reduced to 110 mg/kg. Conclusions. Freshly harvested heads of cutting lettuce were analyzed for the content of such basic biochemical indices as dry matter, vitamin C, protein, nitrates, amount of sugars. Biochemical characteristics of freshly harvested products of heading lettuce in case of direct sowing and non-seedling methods of growing were within the error being almost identical with minor deviations. According to the study results, a typical model of capitate lettuce variety was designed which will have practical application in qualification examination of plant varieties.

Purpose. To investigate features of commercial head quality formation in varieties of cutting lettuce (Lactuca sativa var. capitata L.) for different growing methods. To study the influence of growing methods for cutting lettuce plants on the weight of commercial heads, indices of yield and quality of freshly harvested products. Methods. Field study, laboratory testing and statistical evaluation. Results. The results of studying peculiarities of head formation in such cutting lettuce varieties as ‘Godar’ (control), ‘Smuhlianka’, ‘Olzhych’ and ‘Dyvohrai’ were shown. Based on the results of phenological observations, the duration of interstage periods of growth and development of cutting lettuce plants was determined for the different growing methods. The model of cutting lettuce of capitata variety for different growing methods was presented in terms of biochemical parameters (content of dry matter, vitamin C, nitrates, amount of sugars). The influence of growing methods for cutting lettuce plants on the commercial head weight, indices of yield and quality of freshly harvested products was studied. Obtained results confirmed that in early ripening varie­ti­es the heads were smaller (150 g) and not dense, in late ripening varieties they were large and dense, weight was 150–500 g. Freshly harvested commercial products of head lettuce in case of seedling cultivation was characterized by a slight increase in dry matter content by 0.15–0.29%. The corresponding pattern was observed for the total sugar content. Its amount was slightly higher: 1.3–1.9% in case of direct sowing and 1.6–1.9% – for seedlings cultivation. The content of ascorbic acid (vitamin C, mg/100 g) was the highest in the ‘Dyvohrai’ variety despite of the method of growing. The largest quantity of nitrates in lettuce heads was in the inner stem (480 mg/kg), while in the middle of the head it was reduced to 110 mg/kg. Conclusions. Freshly harvested heads of cutting lettuce were analyzed for the content of such basic biochemical indices as dry matter, vitamin C, protein, nitrates, amount of sugars. Biochemical characteristics of freshly harvested products of heading lettuce in case of direct sowing and non-seedling methods of growing were within the error being almost identical with minor deviations. According to the study results, a typical model of capitate lettuce variety was designed which will have practical application in qualification examination of plant varieties.

Purpose. To elaborate winter wheat cultivation technologies based on balanced fertilizer system that combines application of mineral fertilizers and the increase of their efficiency by the use of preparations with microelements. Methods. Field and laboratory studies, mathematical and statistical analysis. Results. During 2011–2013, the effect of cultivation technologies on the formation of yield and quality of winter wheat varie­ty ‘Benefis’ (pea is a predecessor) was studied. In case of alternative technologies that provided adding only by-products of the predecessor, the yield of winter wheat was 3.73 t/ha when using integrated protection system, and it was increased to 4.22 t/ha with grain quality of the 4th–5th class of the group B when foliar dressing was applied. Resource saving technologies of cultivation with restricted use of fertilizers (Р45К45N30(II)+30(IV)) provided productivity at the level of 5.19–5.61 t/ha with grain quality of the 2nd–3rd class of the group A. Grain yield of 6.27 t/ha of the 2nd class quality was obtained by the use of intensive cultivation technology, which included application of mineral fertilizers (Р90К90N30(II)+60(IV)+30(VIII)) in addition to the use of predecessor’s by-products and foliar dressing. The highest yield of grain (6.71 t/ha) on average during all years of the study with the 1st class of the group A quality was provided by energy-intensive technology, which included application of P135K135N60(II)+75(IV)+45(VIII) with embedding of predecessor’s by-products into the soil and foliar dressing. Conclusions. It was established that in the northern part of the Forest-Steppe zone of Ukraine the highest productivity of winter wheat was obtained in dark gray podzolic soils using the energy-intensive technology with application of P135K135N60(II)+75(IV)+45(VIII) against the background of predecessor’s by-products embedded into the soil in case of integrated plant protection, and foliar dres­sing. This technology ensured the yield of 6.71 t/ha with grain quality of the 1st class of the group A.

Purpose. To elaborate winter wheat cultivation technologies based on balanced fertilizer system that combines application of mineral fertilizers and the increase of their efficiency by the use of preparations with microelements. Methods. Field and laboratory studies, mathematical and statistical analysis. Results. During 2011–2013, the effect of cultivation technologies on the formation of yield and quality of winter wheat varie­ty ‘Benefis’ (pea is a predecessor) was studied. In case of alternative technologies that provided adding only by-products of the predecessor, the yield of winter wheat was 3.73 t/ha when using integrated protection system, and it was increased to 4.22 t/ha with grain quality of the 4th–5th class of the group B when foliar dressing was applied. Resource saving technologies of cultivation with restricted use of fertilizers (Р45К45N30(II)+30(IV)) provided productivity at the level of 5.19–5.61 t/ha with grain quality of the 2nd–3rd class of the group A. Grain yield of 6.27 t/ha of the 2nd class quality was obtained by the use of intensive cultivation technology, which included application of mineral fertilizers (Р90К90N30(II)+60(IV)+30(VIII)) in addition to the use of predecessor’s by-products and foliar dressing. The highest yield of grain (6.71 t/ha) on average during all years of the study with the 1st class of the group A quality was provided by energy-intensive technology, which included application of P135K135N60(II)+75(IV)+45(VIII) with embedding of predecessor’s by-products into the soil and foliar dressing. Conclusions. It was established that in the northern part of the Forest-Steppe zone of Ukraine the highest productivity of winter wheat was obtained in dark gray podzolic soils using the energy-intensive technology with application of P135K135N60(II)+75(IV)+45(VIII) against the background of predecessor’s by-products embedded into the soil in case of integrated plant protection, and foliar dres­sing. This technology ensured the yield of 6.71 t/ha with grain quality of the 1st class of the group A.

Purpose. To analyse the qualitative and quantitative composition of volatile organic substances (VOS) in the petals of six species of dog-rose in the collection of M. M. Gryshko National Botanic Garden of the NAS of Ukraine for further bree­ding. Methods. Volatile organic substances were obtained by steam distillation. VOS was determined using gas chromato­graphy (Chromatograph Agilent Technologies 6890). Results. The qualitative and quantitative composition of volatile organic substances in the petals in such species as Rosa L. (R. roullettii HCh (Correvon), R. multiflora Thunb., R. pimpinellifolia L., R. canina L., R. centifolia L., R. rugosa Thunb.) was investigated. According to the results of the research, 105 VOS were discovered in the dog-rose petals, among which 11 were not identified. The dog-rose petals of identified VOC contained 16 components which share exceeds 5%, 31 – was ranging from 1% to 5%, 47 – was less than 1%. They belonged to different groups including monoterpenoids, sesquiterpenoids, sesquiterpene alcohols, saturated unbranched hydrocarbons etc. The largest number of components were identified in the petals of R. roulettii (49) and R. centifolia (45), while the number of identified components in species R. multiflora (33), R. rugosa (31) and R. canina (30) was relatively smaller. All studied dog-rose species were characterized by the presence of such saturated unbranched hydrocarbons as decan, tetradecane, pentadecane, hexadecane, heptadecane, octadecane, nanodecane, heneicosane, tricosane, tetracosane, pentacosane, heptocosane, hentriacontane. Triterpene hydrocarbon squalene is the important component of the VOS complex in dog-rose pen tals. b-phenylethyl alcohol to be one of the main components of the rose essential oils was found during investigation in the following four dog-rose species as R. centifolia (0.61%), R. pimpinellifolia (3.56%), R. rugosa (4.24%), and R. multiflora (5.43%). Significant content of dihydro-b-ionol (18.46%), dihydro-b-ionone (0.69%), thias­piran A (1.35%), and thiaspiran B (2.17%) were revealed in the petals of R. roulettii, which also have an influence on the aromatic bouquet of the rose oil. Conclusions. For the first time, 105 volatile organic substances were found in the petals of six species of dog-rose, 11 of which were not identified. It was found out that the largest number of components were identified in the petals of R. roulettii (49) and R. centifolia (45). The number of VOS identified in species R. multiflora (33), R. rugosa (31), and R. canina (30) was relatively smaller. Component composition of VOS in the petals of studied dog-rose species is an important constituent in breeding investigations of prospective producers for the various purposes of use.

Purpose. To analyse the qualitative and quantitative composition of volatile organic substances (VOS) in the petals of six species of dog-rose in the collection of M. M. Gryshko National Botanic Garden of the NAS of Ukraine for further bree­ding. Methods. Volatile organic substances were obtained by steam distillation. VOS was determined using gas chromato­graphy (Chromatograph Agilent Technologies 6890). Results. The qualitative and quantitative composition of volatile organic substances in the petals in such species as Rosa L. (R. roullettii HCh (Correvon), R. multiflora Thunb., R. pimpinellifolia L., R. canina L., R. centifolia L., R. rugosa Thunb.) was investigated. According to the results of the research, 105 VOS were discovered in the dog-rose petals, among which 11 were not identified. The dog-rose petals of identified VOC contained 16 components which share exceeds 5%, 31 – was ranging from 1% to 5%, 47 – was less than 1%. They belonged to different groups including monoterpenoids, sesquiterpenoids, sesquiterpene alcohols, saturated unbranched hydrocarbons etc. The largest number of components were identified in the petals of R. roulettii (49) and R. centifolia (45), while the number of identified components in species R. multiflora (33), R. rugosa (31) and R. canina (30) was relatively smaller. All studied dog-rose species were characterized by the presence of such saturated unbranched hydrocarbons as decan, tetradecane, pentadecane, hexadecane, heptadecane, octadecane, nanodecane, heneicosane, tricosane, tetracosane, pentacosane, heptocosane, hentriacontane. Triterpene hydrocarbon squalene is the important component of the VOS complex in dog-rose pen tals. b-phenylethyl alcohol to be one of the main components of the rose essential oils was found during investigation in the following four dog-rose species as R. centifolia (0.61%), R. pimpinellifolia (3.56%), R. rugosa (4.24%), and R. multiflora (5.43%). Significant content of dihydro-b-ionol (18.46%), dihydro-b-ionone (0.69%), thias­piran A (1.35%), and thiaspiran B (2.17%) were revealed in the petals of R. roulettii, which also have an influence on the aromatic bouquet of the rose oil. Conclusions. For the first time, 105 volatile organic substances were found in the petals of six species of dog-rose, 11 of which were not identified. It was found out that the largest number of components were identified in the petals of R. roulettii (49) and R. centifolia (45). The number of VOS identified in species R. multiflora (33), R. rugosa (31), and R. canina (30) was relatively smaller. Component composition of VOS in the petals of studied dog-rose species is an important constituent in breeding investigations of prospective producers for the various purposes of use.

Purpose. To define spring barley breeding lines with an optimal combination of yielding capacity and stability under different weather conditions in the Central Forest-Steppe zone of Ukraine. Methods. Field studies, ANOVA, AMMI, GGE biplot analysis. Results. Hydrothermal regime during interphase periods of spring barley vegetation under conditions of The V. M. Remeslo Myronivka Institute of Wheat of NAAS in 2012–2014 was characterized by significant variability, that facilitated detailed evaluation of the lines for productivity, stability, and resistance to abiotic and biotic factors. In the performance of an experiment, the highest average yielding capacity (5.87 t/ha) was noted in 2012, the lowest one (3.50 t/ha) was in 2013. As for these years, average yield of 4.63 t/ha was obtained in 2014. By applying AMMI and GGE biplot analysis, significant differences in response of the studied lines to variability of weather conditions was revealed. Using AMMI model, additive components of the main effects of the breeding lines and years of testing as well as multiplicative components of their interaction were characterized. GGE biplot genotypes ranking in relation to a hypothetical “ideal” genotype showed an absolute advantage of breeding line ‘Nutans 4540’ for yielding capacity and stability. In addition, breeding lines ‘Nutans 4241’ and ‘Nutans 4120’ were close to ideatype. Selected breeding lines were characterized by resistance and moderate resistance to leaf diseases and lodging. Conclusions. Use of AMMI and GGE biplot analysis to evaluate breeding lines at the final stages of breeding process allows to describe them thoroughly and graphically as well as differentiate them not only for average yielding capacity but also for their interaction with changing conditions during the years of testing. Breeding lines ‘Nutans 4540’, ‘Nutans 4241’, and ‘Nutans 4120’ to be identified for the stability of yielding capacity display in combination with other agronomic characters were transferred to the State variety testing as new spring barley varieties ‘MIP Myrnyi’, ‘MIP Saliut’, and ‘MIP Sotnyk’ respectively.

Purpose. To define spring barley breeding lines with an optimal combination of yielding capacity and stability under different weather conditions in the Central Forest-Steppe zone of Ukraine. Methods. Field studies, ANOVA, AMMI, GGE biplot analysis. Results. Hydrothermal regime during interphase periods of spring barley vegetation under conditions of The V. M. Remeslo Myronivka Institute of Wheat of NAAS in 2012–2014 was characterized by significant variability, that facilitated detailed evaluation of the lines for productivity, stability, and resistance to abiotic and biotic factors. In the performance of an experiment, the highest average yielding capacity (5.87 t/ha) was noted in 2012, the lowest one (3.50 t/ha) was in 2013. As for these years, average yield of 4.63 t/ha was obtained in 2014. By applying AMMI and GGE biplot analysis, significant differences in response of the studied lines to variability of weather conditions was revealed. Using AMMI model, additive components of the main effects of the breeding lines and years of testing as well as multiplicative components of their interaction were characterized. GGE biplot genotypes ranking in relation to a hypothetical “ideal” genotype showed an absolute advantage of breeding line ‘Nutans 4540’ for yielding capacity and stability. In addition, breeding lines ‘Nutans 4241’ and ‘Nutans 4120’ were close to ideatype. Selected breeding lines were characterized by resistance and moderate resistance to leaf diseases and lodging. Conclusions. Use of AMMI and GGE biplot analysis to evaluate breeding lines at the final stages of breeding process allows to describe them thoroughly and graphically as well as differentiate them not only for average yielding capacity but also for their interaction with changing conditions during the years of testing. Breeding lines ‘Nutans 4540’, ‘Nutans 4241’, and ‘Nutans 4120’ to be identified for the stability of yielding capacity display in combination with other agronomic characters were transferred to the State variety testing as new spring barley varieties ‘MIP Myrnyi’, ‘MIP Saliut’, and ‘MIP Sotnyk’ respectively.

Purpose. To study the effect of AKM plant growth regulator on growth, development and yield formation of sunflower (Helianthus annuus L.) hybrids in hybridization plots under the conditions of the Southern Steppe zone of Ukraine. Methods. Laboratory tests, field study, statistical evaluation. Results. The results of studies devoted to determining the optimal AKM concentration for the treatment of seeds of the maternal and paternal lines, the effect of AKM on field germination, biometric parameters of sunflower plants, seed quality (F1) and yield are presented. Three hybrids of the Ukrainian selection, such as ‘Alpha’, ‘Logos’ and ‘Persei’ were studied during 2014–2016. Optimal concentration of AKM (0.0015 g/l) was defined. The vigor of seeds processed by AKM was higher than in check variety by 0.8–12.8 р.р. (♂); 0.4–10.7 p.p. (♀), laboratory germination – by 2.3–6.1 p.p. (♂); 3.5–6.2 p.p. (♀). In 2016, the sunflower plant height for all variants exceeded this parameter to be obtained for other years of the study. This could be explained by the fact that HTC in 2016 for the BBCH 00–39 period was 1.4 times higher than in 2015. In general, hybrids as the studied factor considerably influenced sunflower yield, and the share of the hybrid (factor A) influence is 33%. This should be considered when selecting hybrids for sunflower cultivation technologies in the Steppe zone of Ukraine. Conclusions. Hydrothermal conditions of the year had the maximum impact on the formation of seed quality and yield of sunflower plants of the hybrids under study, but when using AKM growth regulator for presowing seed treatment, this negative impact was reduced by an average of 23%.

Цель. Установить особенности накопления каннабидиола и других каннабиноидных соединений в онтогенезе технической (промышленной) однодомной конопли, определить оптимальную фенологических фазу конопли, в которую целесообразно проводить уборку растений с целью получения каннабидиола для нужд фармацевтической отрасли. Методы. Полевые, лабораторные (тонкослойная хроматография), математической статистики (корреляционно-регрессионный анализ). Результаты. Приведены результаты трехлетних исследований накопления биомассы в онтогенезе растений конопли сортов ‘Гляна’, ‘ЮСО 31’ и ‘Золотоніські 15’, проявления содержания каннабидиола, тетрагидроканнабинола и канабинола в средневзвешенном образце вегетативной массы всех живых листьев и соцветия. Выводы. Наличие и интенсивность накопления определенного каннабиноидного соединения являются наследственно обусловленными признаками. Небольшое количество каннабиноидов у конопли можно идентифицировать уже на ранних стадиях развития, в частности в фазе 1–3 пар настоящих листьев. На основе теоретических расчетов и согласно проведенных исследований установлено, что оптимальным периодом для сбора биомассы конопли медицинского направления использования с последующим выделением из нее каннабидиола является период от полного цветения до фазы биологической спелости. В отдельных семей сорта ‘Гляна’, с которыми проводилась селекционная работа в направлении повышения содержания каннабидиола, можно получить около 5,808 г/м2, сорта ‘ЮСО 31’ – 1,528 г/м2, сорта ‘Золотоніські 15’ – 1,563 г/м2 данного вещества. Соцветия конопли содержат гораздо больше каннабиноидных соединений по сравнению с листьями, но ввиду их доли в общей биомассе растений можно утверждать, что и соцветия, и листья в равной степени пригодны для использования в качестве источника каннабидиола. Использование технической (промышленной) конопли в медицинской (фармацевтической) отраслях является перспективным, но при условии целенаправленной селекционной работы. | Purpose. To find out the specifics of cannabidiol and other cannabinoid compounds accumulation during the ontogenesis of industrial monoecious hemp (i); to determine the optimal phenological stage of harvesting for the purpose of obtaining cannabidiol for pharmaceutical purposes (ii); to find out the prospects of using hemp for the needs of pharmaceutical industry (iii).Methods. Field, labo­ratory (thin-layer chromatography), statistics (correlation and regression analysis).Results. The results of three-year research on the dynamics of biomass accumulation in the ontogenesis of hemp plants of the ‘Hliana’, ‘USO 31’ and ‘Zolotoniski 15’ varieties are presented. The manifestation of the content of cannabidiol, tetrahydrocannabinol and cannabinol is given not in terms of their maximum content (using the analysis of apical parts of plants or female flo­wers) but using a weighted average sample of the vegetative mass from all live leaves and inflorescences.Conclusions. The presence and intensity of certain cannabinoid compound accumulation are the hereditary signs. A small number of cannabinoids in hemp can be identified already at early stages of development, in particular at the 1–3 true leaf pairs stage. On the basis of theoretical calculations and in accordance with the described research methodology, it was found that the optimal period for harvesting biomass of pharmaceutical hemp with subsequent release of cannabidiol is the period from full flowering to the stage of biological maturity. Certain families of the ‘Hliana’ variety involved into selection for increasing cannabidiol content can produce about 5.808 g/m2 of the active substance. The families of variety ‘USO 31’ can produce 1.528 g/m2 and the ‘Zolotoniski 15’ 1.563 g/m2 of the active substance. Inflorescences of hemp contain much more cannabinoid compounds compared to leaves; however, taken into account their shares in the total biomass of plants, it can be argued that inflorescences and leaves are equally suitable for use as a source of cannabidiol. The use of industrial hemp in the pharmaceutical industry is promising but on the assumption of the target breeding | Мета. Встановити особливості накопичення канабідіолу та інших канабіноїдних сполук під час онтогенезу технічних (промислових) однодомних конопель, визначити оптимальну фенологічну фазу конопель, у яку доцільно проводити збирання рослин з метою отримання канабідіолу для потреб фармацевтичної галузі.Методи. Польові, лабораторні (тонкошарова хроматографія), математичної статистики (кореляційно-регресійний аналіз).Результати. Наведено результати трирічних досліджень із вивчення накопичення біомаси в онтогенезі рослин конопель сортів ‘Гляна’, ‘ЮСО 31’ і ‘Золотоніські 15’, вмісту канабідіолу, тетрагідроканабінолу і канабінолу в середньозваженому зразку вегетативної маси усіх живих листків і суцвіття.Висновки. Наявність та інтенсивність накопичення певної канабіноїдної сполуки є спадково обумовленими ознаками. Невелику кількість канабіноїдів у конопель можна ідентифікувати вже на ранніх стадіях розвитку, зокрема у фазі 1–3 пар справжніх листків. На основі теоретичних розрахунків і згідно проведених досліджень установлено, що оптимальним періодом для збирання біомаси конопель медичного напряму використання та подальшого виділення канабідіолу є період від повного цвітіння до фази біологічної стиглості. У окремих сімей сор­ту ‘Гляна’, з якими проводилась селекційна робота у напрямі підвищення вмісту канабідіолу, можна отримати близько 5,808 г/м2, сорту ‘ЮСО 31’ – 1,528 г/м2, сорту ‘Золотоніські 15’ – 1,563 г/м2 даної речовини. Суцвіття конопель містять набагато більше канабіноїдних сполук, порівняно з листками, але зважаючи на їх частку в загальній біомасі рослин, можна стверджувати, що і суцвіття, і листки однаковою мірою придатні для використання як джерела канабідіолу. Використання технічних (промислових) конопель у медичній (фармацевтичній) галузях є перспективним, але за умови цілеспрямованої селекційної роботи.

Purpose. To analyze the level of cross-resistance of obtained salt- and osmotolerant cell lines and plants regenerants of winter triticale to osmotic and salt stresses. Methods. Cultures of tissue and organs in vitro, in vitro breeding, biochemical, statistical analysis. Results. It was established that the stability of cross-resistance trait display to saline and osmotic stresses in obtained cell lines of winter triticale was rather high – from 50 to 76% of calli have survived to the end of the sixth passage. It has been shown that despite the presence of sublethal concentrations of the stress-factor (mannitol/sodium chloride) in selective medium, stable cell lines of the triticale actively continued to grow and accumulate biomass. It was found that in the line ‘38/1296’ cell lines 5L/sl and 5L/os respectively were the most resistant to osmotic and salt stresses, and lines 1C/s1 and 1C/os respectively in the ‘Obrii’ variety, since they had the highest percent of living calli and biomass increment under the selective conditions and their plant regenerant – the highest level of survival after the impact of the abiotic stressors complex. The salt-resistant cell lines of both genotypes of winter triticale as compared to the control were also characterized by significantly higher free proline content under the selective factors impact. The results obtained may indicate that the cell lines and triticale plant regenerants have a genetically determined trait of resistance to stress factors. Conclusions. Verification of traits of resistance to abiotic stressors has shown a significantly high level of cross-tolerance of the obtained cell lines of both triticale genotypes for saline and osmotic stresses. Resistance to saline and osmotic stresses of cells separated in vitro was preserved in induced plants and at the organism level has increased tolerance to abiotic environmental factors. It is shown that due to the general non-specific mechanisms of resistance, the capacity of the callus cultures of triticale to resist to one abiotic stressor can lead to increased tolerance for another one.

Мета. Проаналізувати рівень перехресної стійкості отриманих соле- та осмостійких клітинних ліній і рослин-регенерантів тритикале озимого до осмотичного та сольового стресів.Методи. Культури тканин і органів in vitro, селекції in vitro, біохімічні, статистичний аналіз.Результати. Встановлено, що стабільність прояву ознаки перехресної стійкості як до сольового, так і до осмотичного стресів у отриманих клітинних ліній тритикале озимого була на досить високому рівні – до кінця шостого пасажу виживало від 50 до 76% калюсів. Показано, що, незважаючи на наявність у селективному середовищі сублетальної концентрації стрес-фактора (маніту/хлориду натрію), стійкі клітинні лінії тритикале активно продовжували рости й накопичувати біомасу. Виявлено, що у лінії ‘38/1296’ найбільш стійкими до осмотичного та сольового стресів були клітинні лінії 5Л/сл та 5Л/ос відповідно, а в сорту ‘Обрій’ – 1С/сл та 1С/ос відповідно, оскільки вони мали найвищу частку живих калюсів та приріст біомаси за селективних умов, а рослини-регенеранти з них – найвищий рівень виживання після дії комплексу абіотичних стресорів. Солестійкі клітинні лінії обох генотипів тритикале озимого порівняно з контролем характеризувались також достовірно вищим вмістом вільного проліну за дії селективних чинників. Одержані результати можуть свідчити про те, що клітинні лінії та рослини-регенеранти тритикале мають генетично обумовлену ознаку стійкості до стресових факторів.Висновки. Перевірка ознак стійкості до абіотичних стресорів засвідчила досить високий рівень перехресної толерантності отриманих клітинних ліній обох генотипів тритикале як до сольового, так і до осмотичного стресів. Стійкість до сольового та осмотичного стресів виділених in vitro клітин збереглась у індукованих рослинах і на організмовому рівні забезпечила підвищення толерантності до абіотичних факторів середовища. Показано, що завдяки загальним неспецифічним механізмам стійкості резистентність калюсних культур тритикале до одного абіотичного стресора може призводити до підвищення толерантності й до іншого. | Purpose. To analyze the level of cross-resistance of obtained salt- and osmotolerant cell lines and plants regenerants of winter triticale to osmotic and salt stresses. Methods. Cultures of tissue and organs in vitro, in vitro breeding, biochemical, statistical analysis. Results. It was established that the stability of cross-resistance trait display to saline and osmotic stresses in obtained cell lines of winter triticale was rather high – from 50 to 76% of calli have survived to the end of the sixth passage. It has been shown that despite the presence of sublethal concentrations of the stress-factor (mannitol/sodium chloride) in selective medium, stable cell lines of the triticale actively continued to grow and accumulate biomass. It was found that in the line ‘38/1296’ cell lines 5L/sl and 5L/os respectively were the most resistant to osmotic and salt stresses, and lines 1C/s1 and 1C/os respectively in the ‘Obrii’ variety, since they had the highest percent of living calli and biomass increment under the selective conditions and their plant regenerant – the highest level of survival after the impact of the abiotic stressors complex. The salt-resistant cell lines of both genotypes of winter triticale as compared to the control were also characterized by significantly higher free proline content under the selective factors impact. The results obtained may indicate that the cell lines and triticale plant regenerants have a genetically determined trait of resistance to stress factors.Conclusions. Verification of traits of resistance to abiotic stressors has shown a significantly high level of cross-tolerance of the obtained cell lines of both triticale genotypes for saline and osmotic stresses. Resistance to saline and osmotic stresses of cells separated in vitro was preserved in induced plants and at the organism level has increased tolerance to abiotic environmental factors. It is shown that due to the general non-specific mechanisms of resistance, the capacity of the callus cultures of triticale to resist to one abiotic stressor can lead to increased tolerance for another one. | Цель. Проанализировать уровень перекрестной устойчивости полученных соле- и осмоустойчивых клеточных линий и растений-регенерантов тритикале озимого к осмотическому и солевому стрессам. Методы. Культуры тканей и органов in vitro, селекции in vitro, биохимические, статистический анализ. Результаты. Установлено, что стабильность проявления признака перекрестной устойчивости как к солевому, так и осмотическому стрессам у полученных клеточных линий тритикале озимого была на достаточно высоком уровне – к концу шестого пассажа выживало от 50 до 76% каллусов. Показано, что, несмотря на наличие в селективной среде сублетальной концентрации стресс-фактора (маннита/хлорида натрия), устойчивые клеточные линии тритикале активно продолжали свой рост и накапливали биомассу. Выявлено, что в линии ‘38/1296’ наиболее устойчивыми к осмотическому и солевому стрессам были клеточные линии 5Л/сл и 5Л/ос соответственно, а у сорта ‘Обрий’ – 1С/сл и 1С/ос соответственно, поскольку они имели самую высокую долю живых каллусов и прирост биомассы в селективных условиях, а растения-регенеранты из них – наивысший уровень выживания после воздействия комплекса абиотических стрессоров. Солеустойчивые клеточные линии обоих генотипов тритикале озимого по сравнению с контролем характеризовались также достоверно более высоким содержанием свободного пролина при действии селективных факторов. Полученные результаты могут свидетельствовать о том, что клеточные линии и растения-регенеранты тритикале имеют генетически обусловленный признак устойчивости к стрессовым факторам. Выводы. Проверка признаков устойчивости к абиотическим стрессорам показала достаточно высокий уровень перекрестной толерантности полученных клеточных линий обоих генотипов тритикале как к солевому, так и к осмотическому стрессам. Устойчивость к солевому и осмотическому стрессам выделенных in vitro клеток сохранилась в индуцированных растениях и на уровне организма обеспечила повышение толерантности к абиотическим факторам среды. Показано, что благодаря общим неспецифическим механизмам устойчивости резистентность каллусных культур тритикале к одному абиотическому стрессору может приводить к повышению толерантности и к другому.

Purpose. To analyze the level of cross-resistance of obtained salt- and osmotolerant cell lines and plants regenerants of winter triticale to osmotic and salt stresses. Methods. Cultures of tissue and organs in vitro, in vitro breeding, biochemical, statistical analysis. Results. It was established that the stability of cross-resistance trait display to saline and osmotic stresses in obtained cell lines of winter triticale was rather high – from 50 to 76% of calli have survived to the end of the sixth passage. It has been shown that despite the presence of sublethal concentrations of the stress-factor (mannitol/sodium chloride) in selective medium, stable cell lines of the triticale actively continued to grow and accumulate biomass. It was found that in the line ‘38/1296’ cell lines 5L/sl and 5L/os respectively were the most resistant to osmotic and salt stresses, and lines 1C/s1 and 1C/os respectively in the ‘Obrii’ variety, since they had the highest percent of living calli and biomass increment under the selective conditions and their plant regenerant – the highest level of survival after the impact of the abiotic stressors complex. The salt-resistant cell lines of both genotypes of winter triticale as compared to the control were also characterized by significantly higher free proline content under the selective factors impact. The results obtained may indicate that the cell lines and triticale plant regenerants have a genetically determined trait of resistance to stress factors. Conclusions. Verification of traits of resistance to abiotic stressors has shown a significantly high level of cross-tolerance of the obtained cell lines of both triticale genotypes for saline and osmotic stresses. Resistance to saline and osmotic stresses of cells separated in vitro was preserved in induced plants and at the organism level has increased tolerance to abiotic environmental factors. It is shown that due to the general non-specific mechanisms of resistance, the capacity of the callus cultures of triticale to resist to one abiotic stressor can lead to increased tolerance for another one.

Purpose. To conduct in vitro screening of different genotypes of winter triticale for resistance to salinity in the shoot apical meristem culture. Methods. Plant tissue culture in vitro, in vitro breeding, statistical analysis. Results. It was found that the increase of sodium chloride concentration from 0.6 to 1.5% resulted in inhibition of the callus culture growth in all genotypes that was indicative of the toxic effect of the stress factor. It turns out that 1.2% sodium chloride concentration allowed to differentiate triticale genotypes for salt tolerance. The line ‘38/1296’ appeared to be the most resistant to salinity stress because under breeding conditions calli of this genotype were characterized by higher morphogenetic potential, had the highest crude mass increase, and plants-regenerants were obtained only from explants of this line after cultivation on the medium containing 1.5% sodium chloride. The ‘ADM 11’ variety was the most sensitive to saline stress as mass necrosis and lack of regenerative ability in its calli were observed under breeding conditions. In the studied forms, genotypic dependence of morphogenesis processes in vitro culture was registered. From the induced calli, plants-regenerants were obtained, and their completion of growing, root development and transfer to in vivo conditions were optimized. Conclusions. Genotypic response to salinity stress in the culture of shoot apical meristems of winter triticale was expressed by various crude mass increase and different morphogenetic potential on exposure to a stress factor. The line ‘38/1296’ can be used as a valuable material for further breeding of winter triticale. The culture of shoot apical meristems is recommended to apply as a test system for screening of triticale genotypes for resistance to salinity stress

Purpose. To conduct in vitro screening of different genotypes of winter triticale for resistance to salinity in the shoot apical meristem culture. Methods. Plant tissue culture in vitro, in vitro breeding, statistical analysis. Results. It was found that the increase of sodium chloride concentration from 0.6 to 1.5% resulted in inhibition of the callus culture growth in all genotypes that was indicative of the toxic effect of the stress factor. It turns out that 1.2% sodium chloride concentration allowed to differentiate triticale genotypes for salt tolerance. The line ‘38/1296’ appeared to be the most resistant to salinity stress because under breeding conditions calli of this genotype were characterized by higher morphogenetic potential, had the highest crude mass increase, and plants-regenerants were obtained only from explants of this line after cultivation on the medium containing 1.5% sodium chloride. The ‘ADM 11’ variety was the most sensitive to saline stress as mass necrosis and lack of regenerative ability in its calli were observed under breeding conditions. In the studied forms, genotypic dependence of morphogenesis processes in vitro culture was registered. From the induced calli, plants-regenerants were obtained, and their completion of growing, root development and transfer to in vivo conditions were optimized. Conclusions. Genotypic response to salinity stress in the culture of shoot apical meristems of winter triticale was expressed by various crude mass increase and different morphogenetic potential on exposure to a stress factor. The line ‘38/1296’ can be used as a valuable material for further breeding of winter triticale. The culture of shoot apical meristems is recommended to apply as a test system for screening of triticale genotypes for resistance to salinity stress

Purpose. To summarize results of studying consumptive qualities of different varieties of potato and define basic characteristics which allow to subsume them under specific economic categories. Methods. Field study, laboratory test, summarizing, analytical approach. Results. Potato varieties entered in the State register of plant varieties suitable to dissemination in Ukraine and new ones especially to be bred at the Institute of Potato Growing of NAAS were studied during the period of 2005–2016 for such basic economic characters as consumptive quality of tubers, content of starch, dry matters, protein, sugar, vitamins, carotenoids and mineral substances as well as aminoacids, color of flesh, suitability for industrial manufacturing of potato products and for purpose of technology. Attention was paid to the good prospects to use varie­ties with purple, blue and red potato tuber flesh with high antioxidant capacity. Potato varieties with above cha­racteristics and their complex combination were defined and described. The requirements of processing industry for potato as a raw material for manufacturing of potato food were given. Conclusions. The major criterion for consumptive qualities of a potato variety and correspondingly division for the commercial use is consumptive quality of tubers, especially content of essential nutrients and their favorable combination, improved taste and cooking quality, high antioxidant capacity, suitability for potato products manufacturing and use for purpose of technology. Potato varieties can be divided for economic purposes into edible, suitable for potato products manufacturing, technical and multipurpose ones.

Purpose. To summarize results of studying consumptive qualities of different varieties of potato and define basic characteristics which allow to subsume them under specific economic categories. Methods. Field study, laboratory test, summarizing, analytical approach. Results. Potato varieties entered in the State register of plant varieties suitable to dissemination in Ukraine and new ones especially to be bred at the Institute of Potato Growing of NAAS were studied during the period of 2005–2016 for such basic economic characters as consumptive quality of tubers, content of starch, dry matters, protein, sugar, vitamins, carotenoids and mineral substances as well as aminoacids, color of flesh, suitability for industrial manufacturing of potato products and for purpose of technology. Attention was paid to the good prospects to use varie­ties with purple, blue and red potato tuber flesh with high antioxidant capacity. Potato varieties with above cha­racteristics and their complex combination were defined and described. The requirements of processing industry for potato as a raw material for manufacturing of potato food were given. Conclusions. The major criterion for consumptive qualities of a potato variety and correspondingly division for the commercial use is consumptive quality of tubers, especially content of essential nutrients and their favorable combination, improved taste and cooking quality, high antioxidant capacity, suitability for potato products manufacturing and use for purpose of technology. Potato varieties can be divided for economic purposes into edible, suitable for potato products manufacturing, technical and multipurpose ones.