Comparative investigations of microplastic (MP) occurrence in the global ocean are often hampered by the application of different methods. In this study, the same sampling and analytical approach was applied during five different cruises to investigate MP covering a route from the East-Siberian Sea in the Arctic, through the Atlantic, and into the Antarctic Peninsula. A total of 121 subsurface water samples were collected using underway pump-through system on two different vessels. This approach allowed subsurface MP (100 μm–5 mm) to be evaluated in five regions of the World Ocean (Antarctic, Central Atlantic, North Atlantic, Barents Sea and Siberian Arctic) and to assess regional differences in MP characteristics. The average abundance of MP for whole studied area was 0.7 ± 0.6 items/m3 (ranging from 0 to 2.6 items/m3), with an equal average abundance for both fragments and fibers (0.34 items/m3). Although no statistical difference was found for MP abundance between the studied regions. Differences were found between the size, morphology, polymer types and weight concentrations. The Central Atlantic and Barents Sea appeared to have more MP in terms of weight concentration (7–7.5 μg/m3) than the North Atlantic and Siberian Arctic (0.6 μg/m3). A comparison of MP characteristics between the two Hemispheres appears to indicate that MP in the Northern Hemisphere mostly originate from terrestrial input, while offshore industries play an important role as a source of MP in the Southern Hemisphere. The waters of the Northern Hemisphere were found to be more polluted by fibers than those of the Southern Hemisphere. The results presented here suggest that fibers can be transported by air and water over long distances from the source, while distribution of fragments is limited mainly to the water mass where the source is located. | publishedVersion

Increasing terrestrial run-off from melting glaciers and thawing permafrost to Arctic coastal areas is expected to facilitate re-mobilization of stored legacy persistent organic pollutants (POPs) and mercury (Hg), potentially increasing exposure to these contaminants for coastal benthic organisms. We quantified chlorinated POPs and Hg concentrations, lipid content and multiple dietary markers, in a littoral deposit-feeding amphipod Gammarus setosus and sediments during the melting period from April to August in Adventelva river estuary in Svalbard, a Norwegian Arctic Aarchipelago. There was an overall decrease in concentrations of ∑POPs from April to August (from 58 ± 23 to 13 ± 4 ng/g lipid weight; lw), Hg (from 5.6 ± 0.7 to 4.1 ± 0.5 ng/g dry weight; dw) and Methyl Hg (MeHg) (from 5 ± 1 to 0.8 ± 0.7 ng/g dw) in G. setosus. However, we observed a seasonal peak in penta- and hexachlorobenzene (PeCB and HCB) in May (2.44 ± 0.3 and 23.6 ± 1.7 ng/g lw). Sediment concentrations of POPs and Hg (dw) only partly correlated with the contaminant concentrations in G. setosus. Dietary markers, including fatty acids and carbon and nitrogen stable isotopes, indicated a diet of settled phytoplankton in May–July and a broader range of carbon sources after the spring bloom. Phytoplankton utilization and chlorobenzene concentrations in G. setosus exhibited similar seasonal patterns, suggesting a dietary uptake of chlorobenzenes that is delivered to the aquatic environment during spring snowmelt. The seasonal decrease in contaminant concentrations in G. setosus could be related to seasonal changes in dietary contaminant exposure and amphipod ecology. Furthermore, this decrease implies that terrestrial run-off is not a significant source of re-mobilized Hg and legacy POPs to littoral amphipods in the Adventelva river estuary during the melt season. | publishedVersion

Microplastic presence in benthic marine systems is a widely discussed topic. The influence of the natural matrix on microplastic distribution within the sedimentary matrix is often overlooked. Marine sediments from the western inner Oslofjord, Norway, were investigated for temporal trends, with a particular focus on the relationship between sediment grain-sizes and microplastic distribution. Density separation, optical microscopy and chemical validation were used to categorize microplastics. Microplastic concentrations ranged from 0.02 to 1.71 MPs g −1 dry weight (dw). Fibres were the most common (76%), followed by fragments and films (18%, 6%). Common polymers were polyesters (50%), polypropylene (18%), polymethylmethacrylate (9%), rayon and viscose (5%) and elastane (4%). Microplastics appear to accumulate preferentially according to their morphology and polymer type in certain sediment grain-sizes. Microplastics inputs to the Oslofjord appear to derive from a wastewater treatment plant in the vicinity. Although, the redistribution of microplastics within the fjord needs further investigation. | acceptedVersion

In the present study, polyethylene (PE) microplastics (150–300 μm) were added to Atlantic cod (Gadus morhua) feeds at 1 %, either in their present form (Virgin PE) or spiked with PCB-126 (Spiked PE). The feeds were given to juvenile cod for a 4-week period. The fish grew from 11 to 23 g with no significant difference between dietary treatments. Cod fed spiked PE showed a significantly higher concentration of PCB-126 in liver and muscle samples compared to control and fish ingesting virgin PE. In accordance with the accumulation of PCB-126 in the liver, the expression of hepatic cyp1a was higher in cod fed spiked PE. Notably, we observed that spiked PE, as well as virgin PE, have an effect on skin. Overall changes indicated a reduced skin barrier in fish fed a diet containing PE. Indicating that PE itself through interaction with gut tissue may influence skin health in fish. | publishedVersion

The ongoing reduction in extent and thickness of sea ice in the Arctic might result in an increase of oil spill risk due to the expansion of shipping activity and oil exploration shift towards higher latitudes. This work assessed the response of two oil-in-ice surface drift models implemented in an open-source Lagrangian framework. By considering two numerical modeling experiments, our main finding indicates that the drift models provide fairly similar outputs when forced by the same input. It was also found that using higher resolution ice-ocean model does not imply better results. We highlight the role of sea ice in the spread, direction and distance traveled by the oil. The skill metric seems to be sensitive to the drift location, and drift model re-initialization is required to avoid forecast deterioration and ensure the accurate tracking of oil slicks in real operations. | publishedVersion

Simulations over eight years of continuous surface oil spills around Cuba are carried out to identify the most likely stranding (beaching) locations. The open source Lagrangian oil drift model OpenOil is applied with high resolution hydrodynamic forcing. The actual fraction of the released oil mass reaching different regions is calculated, revealing small differences between a light and a heavy crude oil type. Similar stranding rates for the two oil types are found. Another important conclusion is that, due to the high temporal variability in stranding rates, short term simulations of a few weeks are not suitable to assess environmental risk. The highest stranding rates are simulated in winter in Northern Cuba. It is also found that oil could reach Northern Cuba, Yucatan or Florida in about 3–5 days after a spill. | publishedVersion

Anti-sea lice pesticides, used in the salmonid aquaculture industry, are a growing environmental concern due to their potential to adversely affect non-target crustaceans. Azamethiphos and deltamethrin are two bath treatment pesticides used on salmon farms in Norway, however, limited information is available on their impact on European lobster (Homarus gammarus) larvae in the Norwegian marine environment. Here, we firstly report the lethal (LC50) and effective (EC50) concentrations of azamethiphos and deltamethrin for stage I and stage II larvae, following 1-h exposures. Using a hydrodynamic model, we also modelled the dispersal of both compounds into the marine environment around selected Norwegian farms and mapped the potential impact zones (areas that experience LC50 and EC50 concentrations) around each farm. Our data shows that azamethiphos and deltamethrin are acutely toxic to both larval stages, with LC50 and EC50 values below the recommended treatment concentrations. We also show that the azamethiphos impact zones around farms were relatively small (mean area of 0.04–0.2 km2), however deltamethrin impact zones covered much larger areas (mean area of 21.1–39.0 km2). These findings suggest that deltamethrin poses a significant risk to European lobster in the Norwegian marine environment while the impact of azamethiphos may be less severe. | publishedVersion

Microplastics have been detected in lake environments globally, including in remote regions. Agricultural and populated areas are known to congregate several inputs and release pathways for microplastic. This study investigated microplastic (50–5000 µm) contamination in five Danish freshwater lakes with catchments dominated by arable land use. The concentrations in sediments (n = 3/site) and the zebra mussel, Dreissena polymorpha (n = 30/site), were calculated and compared with catchment characteristics and environmental parameters. Microplastic concentrations in sediment were relatively low (average 0.028 ± 0.017 items/g dry weight sediment) whilst only a single microplastic was found in the mussels (average 0.067 ± 0.249 items/10 individual). Hence, no relationship between the number of observed microplastics in sediment and mussels could be identified, nor could a relationship between concentration in sediment and environmental parameters. As all lakes studied received their water from moderate to heavily anthropogenically impacted catchments, it was expected that they would be sinks for microplastic with high bioavailability. Based on the results of the present study, D. polymorpha were found to not be contaminated by microplastics in the five study lakes. Thus, our results suggest that these mussels do not interact with microplastics at low concentrations. We speculate that the results on sediment and biota could be explained by several factors related to regional differences in plastic use, species characteristics, sampling size, and the fact that finding no microplastic is not always reported in the scientific literature. Thus, the paper provides insight into the dynamics between the catchment, lake, and biota in systems with low microplastic concentration. | publishedVersion

Recreational fishers often consume their catch, which may expose them to environmental contaminants. However, targeted risk assessment for exceeding the tolerable weekly intake (TWI) of a specific contaminant is often lacking, as specific data on the extent of fishing, consumption rates, and contamination of the caught seafood is needed. This study examined recreational fishing for nephrops (Nephrops norvegicus) at several different locations in Western Norway to identify important risk factors. The combination of a field survey to examine actual catches, interviews of recreational fishers about their seafood eating habits, and the analysis of total mercury (Hg, as a proxy for methylmercury (MeHg)) in recreationally captured nephrops allowed to conduct a targeted risk assessment. Recreational fishers consumed on average seven nephrops per meal, and 73% of the fishers ate nephrops once a month or more. The average Hg concentrations in nephrops were below the legal maximum level (100 ± 50 μg/kg wet weight (mean ± SD)). Hg concentrations in female nephrops were significantly higher than in males at the same size, and differed significantly between locations. The recreational fishers in this study were not at risk of exceeding the TWI for MeHg from consuming nephrops only; however, there is a general risk of exceeding TWI for MeHg as 70% of the fishers reported a frequent consumption of fish for dinner. Targeted risk assessments on recreational fishers may reveal particularly vulnerable populations where national dietary surveys may miss the highest seafood consumers. | publishedVersion

An accurate representation of the particle organic matter (POM) footprint is necessary in order to effectively predict impacts upon benthic communities and the risk of excessive organic enrichment beneath aquaculture sea-cages. Consequently, bottom-related processes such as particle resuspension must be adequately parametrized and evaluated in the available numerical models. We implemented two approaches to model POM resuspension in a Lagrangian particle tracking model and compared their influence on footprint extension and gradients of depositional flux against a no-resuspension scenario. We performed simulations in both exposed and protected aquaculture locations, and at different stages of the Atlantic Salmon (Salmo salar) production cycle in Norway. Our results indicate that the use of sediment-dependent thresholds for resuspension has the potential to regulate the high levels of erosion produced when selecting a low critical value in constant-threshold approaches, particularly in dynamic environments with mixed sediment types. | publishedVersion