Applying mineral phosphorus (P) fertilizers introduces a considerable input of the toxic heavy metal cadmium (Cd) into arable soils. This study investigates the fate of P fertilizer derived Cd (Cddff) in soil-wheat systems using a novel combination of enriched stable Cd isotope mass balances, sequential extractions, and Bayesian isotope mixing models. We applied an enriched ¹¹¹Cd labeled mineral P fertilizer to arable soils from two long-term field trials with distinct soil properties (a strongly acidic pH and a neutral pH) and distinct past mineral P fertilizer application rates. We then cultivated wheat in a pot trial on these two soils. In the neutral soil, Cd concentrations in the soil and the wheat increased with increasing past mineral P fertilizer application rates. This was not the case in the strongly acidic soil. Less than 2.3% of freshly applied Cddff was taken up by the whole wheat plant. Most of the Cddff remained in the soil and was predominantly (>95% of freshly applied Cddff) partitioned into the easily mobilizable acetic acid soluble fraction (F1) and the potentially mobile reducible fraction (F2). Soil pH was the determining factor for the partitioning of Cddff into F1, as revealed through a recovery of about 40% of freshly applied Cddff in F1 in the neutral pH soil compared with about 60% in the strongly acidic soil. Isotope mixing models showed that F1 was the predominant source of Cd for wheat on both soils and that it contributed to over 80% of the Cd that was taken up by wheat. By tracing the fate of Cddff in entire soil-plant systems using different isotope source tracing approaches, we show that the majority of Cddff remains mobilizable and is potentially plant available in the subsequent crop cycle.

The two forage species used in New Zealand pastoral agricultural systems, chicory (Cichorium intybus) and plantain (Plantago lanceolata) show differential ability to absorb and translocate cadmium (Cd) from roots to shoots. Chicory can accumulate Cd from even low Cd soils to levels that might exceed regulatory guidelines for Cd in fodder crops and food. Chicory and plantain were grown in soil-filled rhizocolumns under increasing Cd levels (0 (Control), 0.4, 0.8 and 1.6 mg Cd/kg soil) for 60 days and showed variable secretion of oxalic, fumaric, malic and acetic acids as a function of Cd treatment. Plant roots secrete such Low Molecular Weight Organic Acids into the rhizosphere soil, which can influence Cd uptake. Chicory showed significantly (P < 0.05) lower secretion of fumaric acid, and higher secretion of acetic acid than plantain at all Cd treatments. We propose that the significant secretion differences between the two species can explain the significantly (P < 0.05) higher shoot Cd concentration in chicory for all Cd treatments. Understanding the mechanism for increased uptake in chicory may lead to breeding or genetic modification which yield low Cd uptake cultivars needed to mitigate the risk of Cd accumulation in pastoral agricultural food chains from this increasingly important fodder crop.

Dibenzofuran (DBF) derivatives have caused serious environmental problems, especially those produced by paper pulp bleaching and incineration processes. Prominent for its resilient mutagenicity and toxicity, DBF poses a major challenge to human health. In the present study, a new strain of Pseudomonas aeruginosa, FA-HZ1, with high DBF-degrading activity was isolated and identified. The determined optimum conditions for cell growth of strain FA-HZ1 were a temperature of 30 °C, pH 5.0, rotation rate of 200 rpm and 0.1 mM DBF as a carbon source. The biochemical and physiological features as well as usage of different carbon sources by FA-HZ1 were studied. The new strain was positive for arginine double hydrolase, gelatinase and citric acid, while it was negative for urease and lysine decarboxylase. It could utilize citric acid as its sole carbon source, but was negative for indole and H2S production. Intermediates of DBF 1,2-dihydroxy-1,2-dihydrodibenzofuran, 1,2-dihydroxydibenzofuran, 2-hydroxy-4-(3′-oxo-3′H-benzofuran-2′-yliden)but-2-enoic acid, 2,3-dihydroxybenzofuran, 2-oxo-2-(2′-hydrophenyl)lactic acid, and 2-hydroxy-2-(2′-hydroxyphenyl)acetic acid were detected and identified through liquid chromatography-mass analyses. FA-HZ1 metabolizes DBF by both the angular and lateral dioxygenation pathways. The genomic study identified 158 genes that were involved in the catabolism of aromatic compounds. To identify the key genes responsible for DBF degradation, a proteomic study was performed. A total of 1459 proteins were identified in strain FA-HZ1, of which 100 were up-regulated and 104 were down-regulated. A novel enzyme “HZ6359 dioxygenase”, was amplified and expressed in pET-28a in E. coli BL21(DE3). The recombinant plasmid was successfully constructed, and was used for further experiments to verify its function. In addition, the strain FA-HZ1 can also degrade halogenated analogues such as 2, 8-dibromo dibenzofuran and 4-(4-bromophenyl) dibenzofuran. Undoubtedly, the isolation and characterization of new strain and the designed pathways is significant, as it could lead to the development of cost-effective and alternative remediation strategies. The degradation pathway of DBF by P. aeruginosa FA-HZ1 is a promising tool of biotechnological and environmental significance.

Recently, concerns have been raised that residues of glyphosate-based herbicides may interfere with the homeostasis of the intestinal bacterial community and thereby affect the health of humans or animals. The biochemical pathway for aromatic amino acid synthesis (Shikimate pathway), which is specifically inhibited by glyphosate, is shared by plants and numerous bacterial species. Several in vitro studies have shown that various groups of intestinal bacteria may be differently affected by glyphosate. Here, we present results from an animal exposure trial combining deep 16S rRNA gene sequencing of the bacterial community with liquid chromatography mass spectrometry (LC-MS) based metabolic profiling of aromatic amino acids and their downstream metabolites. We found that glyphosate as well as the commercial formulation Glyfonova®450 PLUS administered at up to fifty times the established European Acceptable Daily Intake (ADI = 0.5 mg/kg body weight) had very limited effects on bacterial community composition in Sprague Dawley rats during a two-week exposure trial. The effect of glyphosate on prototrophic bacterial growth was highly dependent on the availability of aromatic amino acids, suggesting that the observed limited effect on bacterial composition was due to the presence of sufficient amounts of aromatic amino acids in the intestinal environment. A strong correlation was observed between intestinal concentrations of glyphosate and intestinal pH, which may partly be explained by an observed reduction in acetic acid produced by the gut bacteria. We conclude that sufficient intestinal levels of aromatic amino acids provided by the diet alleviates the need for bacterial synthesis of aromatic amino acids and thus prevents an antimicrobial effect of glyphosate in vivo. It is however possible that the situation is different in cases of human malnutrition or in production animals.

The real-time textile dyes wastewater contains hazardous and recalcitrant chemicals that are difficult to degrade by conventional methods. Such pollutants, when released without proper treatment into the environment, impact water quality and usage. Hence, the textile dye effluent is considered a severe environmental pollutant. It contains mixed contaminants like dyes, sodium bicarbonate, acetic acid. The physico-chemical treatment of these wastewaters produces a large amount of sludge and costly. Acceptance of technology by the industry mandates that it should be efficient, cost-effective and the treated water is safe for reuse. A sequential anaerobic-aerobic plant-microbe system with acclimatized microorganisms and vetiver plants, was evaluated at a pilot-scale on-site. At the end of the sequential process, decolorization and total aromatic amine (TAA) removal were 78.8% and 69.2% respectively. Analysis of the treated water at various stages using Fourier Transform Infrared (FTIR), High Performance Liquid Chromatography (HPLC)) Gas Chromatography-Mass Spectrometry (GC-MS) Liquid Chromatography-Mass Spectrometry (LC-MS) indicated that the dyes were decolourized and the aromatic amine intermediates formed were degraded to give aliphatic compounds. Scanning Electron Microscope (SEM) and Atomic Force Microscopy (AFM) analysis showed interaction of microbe with the roots of vetiver plants. Toxicity analysis with zebrafish indicated the removal of toxins and teratogens.

Cellulose acetate (CA) is one of widely used polymers for chemical and medical applications due to its versatile physico-chemical functionalities. Although its recycle is available after a deacetylation process, the recycle process releases a huge amount of wastewater. Thus, this study investigated a direct disposal process of CA with its valorization to syngas (H₂ and CO) through pyrolysis. To construct more environmentally benign process, CO₂ was used as a co-feedstock with CA to simultaneously convert them into syngas. Pyrolysis of CA in N₂ was performed as a reference study to examine the effectiveness of CO₂ on valorization of CA. Acetic acid and methyl acetate were main volatile pyrolysates (VPs) from CA pyrolysis, and the further thermal cracking of VPs resulted in syngas and CH₄ formations under both N₂ and CO₂ conditions. To expedite syngas formations, multi-stage pyrolysis (two-stage pyrolysis) and catalytic pyrolysis were employed. With the increased thermal energy through two-stage pyrolysis, four times more production of syngas was shown, comparing to the result of a single-stage pyrolysis. With Ni catalysts, the syngas formation was the two orders of magnitude higher than the single-stage pyrolysis, and the significant enhancement of CO formation was shown in the presence of CO₂ due to combined effects of CO₂ and the Ni-based catalysts. This CO enhancement resulted from catalytically expedited gas phase reactions between CO₂ and VPs evolved from CA. In addition, the CO₂ contributed to the suppression of coke deposition on the catalyst, thereby suggesting more technical and environmental benefits of CO₂ as a reactive co-feedstock of pyrolysis in reference to N₂. Therefore, this study proved the direct and versatile technical platform to convert CA and CO₂ into syngas.

Adding exogenous low-molecular weight organic acids is an effective technique to improve phytoremediation of Cd-contaminated soil and has been well documented, but how acid application rate affects remediation efficiency and its underlying limiting factors remains elusive. We investigated this using pot experiments with rapeseed (Brassica napus L.) as the model plant. Plastic pots packed with a sandy loam contaminated by Cd at 4.838 mg/kg were amended with acetic acid, oxalic acid, citric acid, malic acid and tartaric acid, respectively, at an application rate gradient varying from 0.0 to 12.0 mmol/kg. Plants in each pot were harvested after growing for five months, and we then measured the exchangeable, carbonate, Fe–Mn oxide, organic and residual Cd in the rhizosphere, as well as Cd in both roots and shoots. The results showed that all organic acids improved plant uptake of Cd and, compared with the control without acid addition, they could improve Cd uptake by more than 100%. The enhanced Cd extraction was due to the increase in exchangeable Cd in the rhizosphere. Plant Cd was weakly correlated to the amount of Cd lost from a unit volume of the rhizosphere due to root extraction (R² = 0.06), but a good negative correlation was found between them after normalizing the lost Cd by root biomass (R² = 0.36). Mass balance analysis revealed that the average Cd content in soil (rhizosphere and bulk soils combined) was much higher than the Cd content in the rhizosphere, and the improved Cd mobility after acid addition was thus due to the increased chelation. As diffusion of ligands in water is one order in magnitude smaller than diffusion of Cd ions, our results suggested that Cd migration from the bulk soil into the rhizosphere was a major factor limiting Cd phytoextraction by rapeseed after adding the exogenous organic acids.

Microbial transformation of polyfluoroalkyl phosphate esters (PAPs) into perfluorocarboxylic acids (PFCAs) has recently been confirmed to occur in activated sludge and soil. However, there lacks quantitative information about the half-lives of the PAPs and their significance as the precursors to PFCAs. In the present study, the biotransformation of 6:2 and 8:2 diPAP in aerobic soil was investigated in semi-dynamics reactors using improved sample preparation methods. To develop an efficient extraction method for PAPs, six different extraction solvents were compared, and the phenomenon of solvent-enhanced hydrolysis was investigated. It was found that adding acetic acid could enhance the recoveries of the diPAPs and inhibit undesirable hydrolysis during solvent extraction of soil. However 6:2 and 8:2 monoPAPs, which are the first breakdown products from diPAPs, were found to be unstable in the six solvents tested and quickly hydrolyzed to form fluorotelomer alcohols. Therefore reliable measurement of the monoPAPs from a live soil was not achievable. The apparent DT50 values of 6:2 diPAP and 8:2 diPAP biotransformation were estimated to be 12 and > 1000 days, respectively, using a double first-order in parallel model. At the end of incubation of day 112, the major degradation products of 6:2 diPAP were 5:3 fluorotelomer carboxylic acid (5:3 acid, 9.3% by mole), perfluoropentanoic acid (PFPeA, 6.4%) and perfluorohexanoic acid (PFHxA, 6.0%). The primary product of 8:2 diPAP was perfluorooctanoic acid (PFOA, 2.1%). The approximately linear relationship between the half-lives of eleven polyfluoroalkyl and perfluoroalkyl substances (PFASs, including 6:2 and 8:2 diPAPs) that biotransform in aerobic soils and their molecular weights suggested that the molecular weight is a good indicator of the general stability of low-molecular-weight PFAS-based compounds in aerobic soils.

The acidogenic fermentation of dairy wastewater (DW) was evaluated for carboxylic acids (CA) production, investigating the influence of substrate/microorganism (S/X) ratio and applying different mathematical models to the bioproduct formation data. The experiments were performed in batch reactors for 28 days, and four S/X ratios were tested (0.8, 1.2, 1.6, and 1.9 gCOD gVSS⁻¹). The S/X ratio increase did not influence the percentage of DW conversion into carboxylic acids (42–44%), but the productivity was positively affected (100–200% in general). Acetic acid was the CA formed in the highest concentration for all experiments, followed by propionic and butyric acids. Exponential models were better suited to describe this kinetics process. Therefore, according to the estimated kinetic parameters, the S/X ratio 1.6 was more suitable for CA production from acidogenic fermentation of dairy wastewater, in which the concentrations of longer CA, such as propionate and butyrate, were formed in higher quantities. In addition, it was determined a correlation between the S/X ratio and kinetic parameters like degradation/production rate constant (K) and maximum productivity rate (μₘ).

Batch experiments, in conjunction with chromatographic and spectroscopic measurements, were performed to comparatively investigate the degradation of various chlorophenolic (CP) compounds (e.g., 2-CP, 4-CP, 2,3-DCP, 2,4-DCP, 2,4,6-TCP, 2,3,4,6-TeCP) by a modified Fenton process using pyrite as the catalyst. The batch results show that the CP removal by pyrite-Fenton process was highly dependent on chemical conditions (e.g., pH, CP and pyrite concentration), CP type, number and location of chlorine atoms on the aromatic ring. With the exception of 2,3,4,6-TeCP and 2,3-DCP, the CP removal decreased with increasing the number of chlorine constituents. While the main mechanism responsible for monochlorophenol removal (e.g., 2-CP and 4-CP) was the hydroxyl radical attack on aromatic rings, the CP removal for multichlorophenolic compounds (e.g., 2,3,4,6-TeCP) was driven by both: (1) hydroxyl radical attack on aromatic rings by both solution and surface-bound hydroxyl radicals and (2) adsorption onto pyrite surface sites. The adsorption affinity increased with increasing the number of Cl atoms on the aromatic ring due to enhanced hydrophobic effect. The TOC removal was not 100% complete for all CPs investigated due to formation of chemically less degradable chlorinated intermediate organic compounds as well as low molecular weight organic acids such as formic and acetic acid. Spectroscopic measurements with SEM-EDS, zeta potential and XPS provided evidence for the partial oxidation of pyrite surface Fe(II) and disulfide groups under acidic conditions.