Fe–N co-doped biochar is recently an emerging carbocatalyst for persulfate activation in situ chemical oxidation (ISCO). However, the involved catalytic mechanisms remain controversial and distinct effects of coexisting water components are still not very clear. Herein, we reported a novel N-doped biochar-coupled crystallized Fe phases composite (Fe@N-BC₈₀₀) as efficient and low-cost peroxydisulfate (PDS) activators to degrade bisphenol A (BPA), and the underlying influencing mechanism of coexisting inorganic anions (IA) and humic constituent. Due to the formation of graphitized nanosheets with high defects (AI index>0.5, ID/IG = 1.02), Fe@N-BC₈₀₀ exhibited 2.039, 5.536, 8.646, and 23.154-fold higher PDS catalytic activity than that of Fe@N-BC₆₀₀, Fe@N-BC₄₀₀, N-BC, BC. Unlike radical pathway driven by carbonyl group and pyrrolic N of low/mid-temperature Fe@N–BCs. The defective graphitized nanosheets and Fe-Nx acted separately as electron transfer and radical pathway active sites of Fe@N-BC₈₀₀, where π-π sorption assisted with pyrrolic N and pore-filling facilitated BPA degradation. The strong inhibitory effects of PO₄³⁻ and NO₂⁻ were ascribed to competitive adsorption of phosphate (61.11 mg g⁻¹) and nitrate (23.99 mg g⁻¹) on Fe@N-BC₈₀₀ via electrostatic attraction and hydrogen bonding. In contrast, HA competed for the pyrrolic-N site and hindered electron delivery. Moreover, BPA oxidation pathways initiated by secondary free radicals were proposed. The study facilitates a thorough understanding of the intrinsic properties of designed biochar and contributes new insights into the fate of degradation byproducts formed from ISCO treatment of micropollutants.

Rare earth elements (REEs) are typically present as mixtures in the environment, but a quantitative understanding of mixture toxicity and interactions of REEs is still lacking. Here, we examined the toxicity to wheat (Triticum aestivum L.) of Y, La, and Ce when applied individually and in combination. Both concentration addition (CA) and independent action (IA) reference models were used for mixture toxicity analysis because the toxicity mechanisms of REEs remain obscure. Upon single exposure, the EC50s of Y, La, and Ce, expressed as dissolved concentrations, were 1.73 ± 0.24 μM, 2.59 ± 0.23 μM, and 1.50 ± 0.22 μM, respectively. The toxicity measured with relative root elongation followed La < Y ≈ Ce, irrespective of the dose descriptors. The use of CA and IA provided similar estimates of REE mixture interactions and toxicity. When expressed as dissolved metal concentrations, nearly additive effects were observed in Y-La and La-Ce mixtures, while antagonistic interactions were seen in Y-Ce mixtures. When expressed as free metal activities, antagonistic interactions were found for all three binary mixtures. This can be explained by a competitive effect of REEs ions for binding to the active sites of plant roots. The application of a more elaborate MIXTOX model in conjunction with the free ion activities, which incorporates the non-additive interactions and bioavailability-modifying factors, well predicted the mixture toxicity (with >92% of toxicity variations explained). Our results highlighted the importance of considering mixture interactions and subsequent bioavailability in assessing the joint toxicity of REEs.

In this work, we report on the synthesis and characterization of nanoporous bimetallic metal-organic frameworks (FeCo-BDC). Effects of synthesis time and temperature on the structures, morphology, and catalytic performance of FeCo-BDC were investigated. Scanning Electron Microscopy (SEM), Transmission electron microscopy (TEM) and Brunauer-Emmett-Teller (BET) were used to reveal the morphological and textural characteristics. The crystal structure and chemical composition of FeCo-BDC were determined by means of X-ray powder diffraction (XRD), Fourier Transform Infrared Spectroscopy (FT-IR), X-ray Photoelectron Spectroscopy (XPS), and Inductively Coupled Plasma Mass Spectrometry (ICP-MS) measurements. Interestingly, FeCo-BDC grew into the same crystal structure with different morphology in the temperature of 110–150 °C with 12–48 h. The heterogeneous catalytic activity of FeCo-BDC was tested to activate peroxydisulfate (PDS) and peroxymonosulfate (PMS) for removal of methylene blue (MB). The results found that FeCo-BDC synthesized at 150 °C with 24 h exhibited the best catalytic performance for PMS and obtained 100% of MB removal within 15 min. The abundant unsaturated metal active sites of Fe(II) and Co(II) in the skeleton of FeCo-BDC made a great contribution to the generation of sulfate (▪) and hydroxyl radicals (OH), which resulted in the excellent performance for MB degradation.

Preoxidation of As(III) to As(V) is required for the efficient removal of total arsenic in the treatment of wastewater. In this work, the electro-Fenton oxidation of As(III) with a high efficiency was successfully achieved by using the system of the stainless steel net (SSN) coating with reduced graphene oxide (RGO@SSN) as the cathode and stainless steel net (SSN) as the sacrificial anode. The RGO@SSN was synthesized by electrophoretic deposition-annealing method. The carbon disorder and defects of RGO resulted from the remained oxygen-containing functional groups facilitated the electrocatalytically active sites for two-electron oxygen reduction reaction (ORR). A high concentration (up to 1000 μmol/L) of H₂O₂ was in-situ produced through two-electron oxygen reduction reaction of electro-catalysis, and then served as the electro-Fenton reagent for the oxidation of As(III). HO generated by H₂O₂ participating the electro-Fenton reaction or decomposed at the surface of RGO@SSN cathode at acid condition endowed the strong oxidizing ability for As(III). The electro-Fenton equipped with RGO@SSN cathode has a promising application in the oxidation and removal of organic or inorganic pollutants in wastewater.

Cryptomelane-type octahedral molecular sieve manganese oxide (OMS-2) possesses high redox potential and has attracted much interest in its application for oxidation arsenite (As(III)) species of arsenic to arsenate (As(V)) to decrease arsenic toxicity and promote total arsenic removal. However, coexisting ions such as As(V) and phosphate are ubiquitous and readily bond to manganese oxide surface, consequently passivating surface active sites of manganese oxide and reducing As(III) oxidation. In this study, we present a novel strategy to significantly promote As(III) oxidation activity of OMS-2 by tuning K+ concentration in the tunnel. Batch experimental results reveal that increasing K+ concentration in the tunnel of OMS-2 not only considerably improved As(III) oxidation kinetics rate from 0.027 to 0.102 min−1, but also reduced adverse effect of competitive ion on As(III) oxidation. The origin of K+ concentration effect on As(III) oxidation was investigated through As(V) and phosphate adsorption kinetics, detection of Mn2+ release in solution, surface charge characteristics, and density functional theory (DFT) calculations. Experimental results and theoretical calculations confirm that by increasing K+ concentration in the OMS-2 tunnel not only does it improve arsenic adsorption on K+ doped OMS-2, but also accelerates two electrons transfers from As(III) to each bonded Mn atom on OMS-2 surface, thus considerably improving As(III) oxidation kinetics rate, which is responsible for counteracting the adverse adsorption effects by coexisting ions.

Bisphenol A (BPA) is a widely concerned endocrine disrupting chemical and hard to be removed through conventional wastewater treatment processes. In this study, we developed a TiO2 decorated titanate nanotubes composite (TiO2/TNTs) and used for photocatalytic degradation of BPA. TEM and XRD analysis show that the TiO2/TNTs is a nano-composite of anatase and titanate, with anatase acting as the primary photocatalytic site and titanate as the skeleton. TiO2/TNTs exhibited excellent photocatalytic reactivity and its easy-settling property leaded to good reusability. After 5 reuse cycles, TiO2/TNTs also could photo-degrade 91.2% of BPA with a high rate constant (k1) of 0.039 min⁻¹, which was much better than TiO2 and TNTs. Higher pH facilitated photocatalysis due to more reactive oxygen species produced and less material aggregation. The presence of NaCl and CaCl2 showed negligible effects on BPA degradation, but NaHCO3 caused an inhibition effect resulting from consumption of ·OH. Humic acid inhibited degradation mainly due to blockage of the active sites of TiO2/TNTs. Degradation pathway was well interpreted through theoretical calculation. Hydroxyl radical played the dominate role in BPA photodegradation, and the atoms of BPA with high Fukui index based on density-functional theory (DFT) calculation are the radical easy-attacking (f⁰) sites. Considering the good photocatalytic reactivity, reusability, stability and settle property, TiO2/TNTs promises to be an efficient alternative for removal of organic compounds from wastewaters.

Clay minerals are the most popular adsorbents/amendments for immobilizing heavy metals in contaminated soils, but the dissolved organic matter (DOM) in soil environment would potentially affect the adsorption/immobilization capacity of clay minerals for heavy metals. In this study, the effects of DOM derived from chicken manure (CM) on the adsorption of cadmium (Cd2+) on two clay minerals, bentonite and zeolite, were investigated. The equilibrium data for Cd2+ sorption in the absence or presence of CM-DOM could be well-fitted to the Langmuir equation (R2 > 0.97). The presence of CM-DOM in the aqueous solution was found to greatly reduce the adsorption capacity of both minerals for Cd2+, in particular zeolite, and the percentage decreases for Cd2+ sorption increased with increasing concentrations of Cd2+ as well as CM-DOM in aqueous solutions. The adsorption of CM-DOM on zeolite was greater than that on bentonite in the absence of Cd2+, however, a sharp increase was observed for CM-DOM sorption on bentonite with increasing Cd2+ concentrations but little change for that on zeolite, which can be attributed to the different ternary structures on mineral surface. The CM-DOM modified clay minerals were utilized to investigate the effect of mineral-adsorbed CM-DOM on Cd2+ sorption. The adsorbed form was found to inhibit Cd2+ sorption, and further calculation suggested it primarily responsible for the overall decrease in Cd2+ sorption on clay minerals in the presence of CM-DOM in aqueous solutions. An investigation for the mineral surface morphology suggested that the mineral-adsorbed CM-DOM decreased Cd2+ sorption on bentonite mainly through barrier effect, while in the case of zeolite, it was the combination of active sites occupation and barrier effect. These results can serve as a guide for evaluating the performance of clay minerals in immobilizing heavy metals when animal manure is present in contaminated soils.

Dichlorodiphenyltrichloroethane (DDT) poses a significant health risk to humans which is associated with genomic DNA hypomethylation. However, the mechanism and biological consequences remain poorly understood. In vitro assays confirmed that the DDT metabolites 2,2-bis(p-chlorophenyl)-acetic acid (DDA) and 1-chloro-2,2-bis-(p-chlorophenyl)ethylene (DDMU), but not other DDT metabolites, significantly inhibited DNA methyltransferase 1 (DNMT1) activity, leading to genomic hypomethylation in cell culture assays. DNMT1 as a target for DNA hypomethylation induced by DDT metabolites was also confirmed using cell cultures in which DNMT1 was silenced or highly expressed. DDA and DDMU can modify methylation markers in the promoter regions of sexual development-related genes, and change the expression of Sox9 and Oct4 in embryonic stem cells. Molecular docking indicated that DDA and DDMU bound to DNMT1 with high binding affinity. Molecular dynamic simulation revealed that DDA and DDMU acted as allosteric modulators that reshaped the conformation of the catalytic domain of DNMT1. These findings provide a new insight into DDT-induced abnormalities in sexual development and demonstrate that selective binding to DNMT1 by DDA and DDMU can interfere with human DNMT1 activity and regulate the expression of the Sox9 and Oct4 genes.

Porous carbons are appealing low-cost and metal-free catalysts in persulfate-based advanced oxidation processes. In this study, a family of porous biochar catalysts (ZnBC) with different porous structures and surface functionalities are synthesized using a chemical activation agent (ZnCl₂). The functional biochars are used to activate persulfate for sulfamethoxazole (SMX) degradation. ZnBC-3 with the highest content of ketonic group (CO, 1.25 at%) exhibits the best oxidation efficiency, attaining a rate constant (kₒbₛ) of 0.025 min⁻¹. The correlation coefficient of the density of CO to kₒbₛ (R² = 0.992) is much higher than the linearity of the organic adsorption capacity to kₒbₛ (R² = 0.694), implying that CO is the intrinsic active site for persulfate activation. Moreover, the volume of mesopore (R² = 0.987), and Zeta potential (R² = 0.976) are also positive factors in PS adsorption and catalysis. In the mechanistic study, we identified that singlet oxygen is the primary reactive oxygen species. It can attack the –NH₂ group aligned to the benzene ring to form dimer products which could be adsorbed on the biochar surface to reach complete removal of the SMX. The optimal pH range is 4–6 which will minimize the electrostatic repulsion between ZnBCs and the reactants. The SMX degradation in ZnBC/PS system was immune to inorganic anions but would compete with organic impurities in the real wastewater. Finally, the biochar catalysts are filled in hydrogel beads and packed in a flow-through packed-bed column. The continuous system yields a high removal efficiency of over 86% for 8 h without decline, this work provided a simple biochar-based persulfate catalyst for complete antibiotics removal in salty conditions.

Excess fluoride concentration in drinking water is a global issue, as this has an adverse effect on human health. Several adsorbents have been synthesized from natural raw material to remove fluoride from water. Reported adsorbents have some problems with the leaching of metal ions, fewer adsorption sites, and low adsorption capacity. Therefore, to address this, an effective biomaterial derived from the Luffa cylindrica (LC), containing many active sites, was integrated with a nano form of cerium oxide to form a robust, biocompatible, highly porous, and reusable LC–Ce adsorbent. This synthesized biosorbent offers better interaction between the active sites of LC–Ce and fluoride, resulting in higher adsorption capacity. Several factors, influence the adsorption process, were studied by a central composite design (CCD) model of statistical analysis. Langmuir’s and Freundlich’s models well describe the adsorption and kinetics governed by the pseudo–second–order model. The maximum monolayer adsorption capacity was found to be 212 and 52.63 mg/g for LC–Ce and LC, respectively determined by the Langmuir model. Detailed XPS and FTIR analyses revealed the underlying mechanism of fluoride adsorption via ion-exchange, electrostatic interaction, H–bonding, and ion-pair formation. All the results indicate that LC–Ce could serve as a suitable adsorbent for efficient fluoride removal (80–85%).