The aim of this study is to synthesize and characterize an economical and environmentally-friendly adsorbent with high adsorption capacity. For this purpose, the walnut shells (Juglans regia L.) were chemically modified using sulfuric and citric acids, separately. After pyrolysis and synthesis of activated carbon (AC), the optimization of conditions at the preconcentration/removal step was performed using parameters such as pH and contact time for uranium in the model solutions. The measurements were carried out by inductively coupled plasma-mass spectrometry (ICP-MS). From the shapes of the BET isotherms, it may be stated that activated carbon exhibit type I. It was found that the surface area and total pore volume of the activated carbon were 696.6 m2/g and 0.35 mL/g, respectively. The adsorption capacity was found to be 220 mg/g. It was found that the optimum pH is 6.0 for preconcentration/removal using AC obtained by sulfuric acid as chemically-modifier. The optimized method was applied to determination of U at ng/mL levels in the model solutions.

A new adsorbent modified from orange peel (OP) was successfully synthesized by ethylenediamine crosslinking method to remove Cr(VI) from wastewater. The modified orange peel powder (MOPP) was investigated in a batch adsorption system, including both equilibrium adsorption isotherms and kinetics. Effects of several factors, including adsorbent dose, initial pH and Cr(VI) concentration were studied. The data indicated that the pH was not an essential factor that affected the adsorption process, it has a wide pH range from 4 to 10, and high adsorbent dose and lower Cr(VI) concentration could increase the Cr(VI) removal efficiency. Equilibrium data were analysed using the Langmuir, Freundlich and Temkin isotherm models and found to be well represented by the Langmuir isotherm model. The maximum capacity (qmax) obtained from Langmuir model was 52.08 mg/g at pH 6.0. The kinetics of adsorption followed the pseudo-second-order kinetic equation. The results suggest that MOPP is an inexpensive and efficient adsorbent for removing Cr(VI) from aqueous solution.