Previously, we showed that manganese (Mn) levels in settled dust in elementary schools increased at a rate of 34.1% per km closer to a ferro-manganese alloy plant in the rainy season. In this study, we investigated how this environmental pollution indicator varied in the dry season and if there was an association with Mn biomarker levels in school-aged children. Dust samples were collected with passive samplers (disposable Petri dishes) placed in interior and exterior environments of 14 elementary schools. Occipital hair, toenails and blood samples were collected from 173 students aged 7–12 years from three of these schools, with varying distance from the industrial plant. Mn and lead (Pb) levels were measured by graphite furnace atomic absorption spectrometry. Mn concentration geometric means (GM) in dust fall accumulation in interior environments of schools located at 2, 4, 6 and > 6 km-radii from the plant were 2212, 584, 625 and 224 μg Mn/m2/30 days, respectively. The modelled rate of change of dust Mn levels decreases by 59.8% for each km further from the plant. Pb levels in settled dust varied between 18 and 81 μg/m2/30 days with no association with distance from the plant. Blood lead levels median (range) were 1.2 μg/dL (0.2–15.6), of which 97.8% were <5 μg/dL. Mn in hair and toenails were 0.66 μg/g (0.16–8.79) and 0.86 μg/g (0.15–13.30), respectively. Mn loading rates were positively associated with log MnH (β = 1.42 × 10−5, p < 0.001) after adjusting for children's age; and also with log MnTn (β = 2.31 × 10−5, p < 0.001) independent of age. Mn loading rates explained 18.5% and 28.5% of the variance in MnH and MnTn levels, respectively. School-aged children exposure to Mn, independently of age, increases significantly with school proximity to the ferro-manganese alloy plant.

Industrial metalworking facilities emit a variety of air toxics including volatile organic compounds, polycyclic aromatic hydrocarbons (PAHs) and heavy metals. In order to investigate these emissions, a 1-month multi-instrument field campaign was undertaken at an industrial site in Grande-Synthe, Dunkirk (France), in May and June 2012. One of the main objectives of the study was to provide new information on the chemical composition of particulate matter with aerodynamic diameters smaller than 2.5 μm (PM₂.₅) in the vicinity of metalworking facilities. An aerosol time-of-flight mass spectrometer (ATOFMS) was deployed to provide size-resolved chemical mixing state measurements of ambient single particles at high temporal resolution. This mixing state information was then used to apportion PM₂.₅ to local metalworking facilities influencing the receptor site. Periods when the site was influenced by metalworking sources were characterised by a pronounced increase in particles containing toxic metals (manganese, iron, lead) and polycyclic aromatic hydrocarbons (PAHs) with a variety of chemical mixing states. The association of specific particle classes with a nearby ferromanganese alloy manufacturing plant was confirmed through comparison with previous analysis of raw materials (ores) and chimney filter particle samples collected at the facility. Particles associated with emissions from a nearby steelworks were also identified. The contribution of local metalworking activities to PM₂.₅ at the receptor site for the period when the ATOFMS was deployed ranged from 1 to 65% with an average contribution of 17%, while the remaining mass was attributed to other local and regional sources. These findings demonstrate the impact of metalworking facilities on air quality downwind and provide useful single particle signatures for future source apportionment studies in communities impacted by metalworking emissions.

The chemical composition of single particles deposited on industrial filters located in three different chimneys of an iron-manganese (Fe–Mn) alloy manufacturing plant have been compared using aerosol time-of-flight mass spectrometry (ATOFMS) and scanning electron microscopy–energy dispersive X-ray spectrometry (SEM-EDX). Very similar types of particles were observed using both analytical techniques. Calcium-containing particles dominated in the firing area of the sintering unit, Mn and/or Al-bearing particles were observed at the cooling area of the sintering unit, while Mn-containing particles were dominant at the smelting unit. SEM-EDX analysis of particles collected downstream of the industrial filters showed that the composition of the particles emitted from the chimneys is very similar to those collected on the filters. ATOFMS analysis of ore samples was also performed to identify particulate emissions that could be generated by wind erosion and manual activities. Specific particle types have been identified for each emission source (chimneys and ore piles) and can be used as tracers for source apportionment of ambient PM measured in the vicinity of the industrial site.

The present work summarizes data about palladium contents of road tunnel dust from 1994 to 2007 and sewage sludge ash from 1972 to 2006. Since palladium is emitted from automotive catalytic converters as elemental particles, road dust is quiet useful to study traffic-related Pd emissions. Very high Pd values of up to 516 μg Pd kg−1 were found in the road dust samples collected in 2007. Heavy metals of all urban emissions, also dental practice effluent, are enriched in sewage sludge ash and thus this matrix is useful for the documentation of palladium emission caused by the use of Pd alloys in dental medicine. In sewage sludge ash highest Pd contents of maximum 460 μg Pd kg−1 were found in the years 1986–1997. In both matrices correlations of Pd content to Pd demand of industry are discussed. This work reveals the link between intensified industrial Pd use and Pd content in according environmental samples.

Herein, activated carbon supported modified with bimetallic-platin ruthenium nano sorbent (PtRu@AC) was synthesized by a thermal decomposition process and used in the removal of methylene blue (MB) from aqueous solutions. The synthesized nano sorbents were characterized by X-ray Diffraction (XRD), Transmission Electron Microscopy (TEM), and X-ray Photoelectron Spectroscopy (XPS) spectroscopic techniques. The data obtained from characterization studies showed that PtRu@AC nano sorbent was highly crystalline and in a form of PtRu alloy with a monodispersed composition. The results indicated that the maximum adsorption capacity (qemax) for the removal of MB with PtRu@AC under optimum conditions was detected to be 1.788 mmol/g (569.4 mg/g). The experimental kinetic results of the study revealed that the adsorption of methylene blue was found to be more compatible with the false second-order model compared to some tested models. Calculations for thermodynamic functions including enthalpy change (ΔHo), entropy change (ΔSo), and Gibbs free energy change (ΔGo) values were performed to get an idea about the adsorption mechanism. As a result, the synthesized PtRu@AC nano adsorbent was detected as a highly effective adsorbent material in the removal of MB from aquatic mediums.

Oral bioaccessibility (BAc) is a surrogate for the bioavailability (BAv) of a broad range of substances, reflecting the value that the approach offers for assessing oral exposure and risk. BAc is generally considered to have been validated as a proxy for oral BAv for the important soil contaminants Pb, Cd, and As. Here, using literature data for Ni BAc and BAv, we confirmed that Ni BAc (gastric only, with HCl mimicking stomach conditions) is a conservative measure of BAv for the oral exposure pathway. Measured oral BAv of Ni in soil was shown to be 50–100 times less than the simplest oral BAc estimates (%BAv = 0.012(%BAc) - 0.023 (r = 0.701, 95%CI [0.456, 0.847], n = 30)) in rats, demonstrating a significant conservatism for exposure assessment. The relationship between the oral BAv and BAc of nickel sulfate hexahydrate (NSHH) was comparable to that of soil, with measured oral BAv of NSHH (1.94%) being a small fraction of NSHH gastric BAc (91.1%). BAc and BAv reflect the underlying Ni speciation of the sample, with the bioaccessible leaching limits being represented by the highly soluble Ni salts and the poorly soluble Ni monoxide, and the environmental (e.g. soil properties) or gastric (e.g. food present) conditions. BAc has potential utility for chemical classification purposes because pure Ni substances can be grouped by %BAc values(using standardized methodologies for the relevant exposure routes), these groupings reflecting the underlying chemistry and speciation of the samples of substances tested here, with 0.008% %BAc for alloys (SS304, SS316, Inconel, Monel), <1% in green NiO and Ni metal massives, 0.9–23.6% for Ni powders, 9.8–22.7% for Ni sulfides, 26.3–29.6% for black oxidic Ni, and 82–91% for the soluble Ni salts. Oral BAc provides realistic yet conservative estimates of BAv for the hazard classification and risk assessment of Ni substances.

Although air pollution decreased in some cities that shifted from an industrial to a service-based economy, and vehicular emission regulation became more restrictive, it is still a major risk factor for mortality worldwide. In central São Paulo, Brazil, air quality monitoring stations and tree-ring analyses revealed a decreasing trend in the concentrations of particulate matter and metals. Such trends, however, may not be observed in industrial districts located in the urban periphery, where the usual mobile sources may be combined with local stationary sources. To evaluate environmental pollution in an industrial district in southeastern São Paulo, we assessed its spatial variability, by measuring magnetic properties and concentrations of Al, Ba, Ca, Cl, Cu, Fe, K, Mg, Mn, P, S, Sr, Zn in the bark of 62 trees, and its temporal trends, by measuring Cd, Cu, Ni, Pb, V, Zn in tree rings of three trees. Source apportionment analysis based on tree barks revealed two clusters with high concentrations of metals, one related to vehicular and industrial emissions (Al, Ba, Cu, Fe, Zn) in the east side of the industrial cluster, and the other related to soil resuspension (Cu, Zn, Mn) in its west side. These patterns are also supported by the magnetic properties of bark associated with iron oxides and titanium-iron alloy concentrations. Dendrochemical analyses revealed that only the concentrations of Pb consistently decreased over the last four decades. The concentrations of Cd, Cu, Ni, V, and Zn did not significantly decrease over time, in contrast with their negative trends previously reported in central São Paulo. This combined biomonitoring approach revealed spatial clusters of metal concentration in the vicinity of this industrial cluster and showed that the local population has not benefited from the decreasing polluting metal concentrations in the last decades.

A series of representative street dust samples were collected from a heavily industrialized city, Zhuzhou, in central China, with the aim to investigate the spatial distribution and pollution status of 17 trace metal/metalloid elements. Concentrations of twelve elements (Pb, Zn, Cu, Cd, Hg, As, Sb, In, Bi, Tl, Ag and Ga) were distinctly amplified by atmospheric deposition resulting from a large scale Pb/Zn smelter located in the northwest fringe of the city, and followed a declining trend towards the city center. Three metals (W, Mo and Co) were enriched in samples very close to a hard alloy manufacturing plant, while Ni and Cr appeared to derive predominantly from natural sources. Other industries and traffic had neglectable effects on the accumulation of observed elements. Cd, In, Zn, Ag and Pb were the five metal/metalloids with highest pollution levels and the northwestern part of city is especially affected by heavy metal pollution.

Perfluorocarbons (PFC) are important greenhouse gas. In the aluminum electrolysis industry, PFC emission had been valued. The electrolytic reduction of rare earth metals in fluoride/oxide system with carbon anode and tungsten cathode also has PFC emission. But the PFC emission in rare earth metals industry received less attention. The PFC emissions during the electrolysis were studied by tracking the change of CF4 concentration in the flue gas of neodymium electrolysis and dysprosium-iron alloy electrolysis. The results showed that there were continuous CF4 overflows in the electrolysis process. The CF4 was outburst when anode effect occurred. The anode effect was always accompanied with the low electrolysis temperature. In addition, because of the electrolytic dysprosium-iron alloy requires higher cell voltage, the PFC emissions are higher than rare earth electrolysis. In general, PFC emissions from rare earth metal electrolysis are quite same as the aluminum electrolysis industry.

Since the early 1960s, the application of aluminum alloy sacrificial anodes to mitigate marine corrosion has been well known. The aim of this work was to study aluminum bioconcentration in Mytilus edulis by an in vitro test performed in two tanks: the first containing non-contaminated water (NCW) and the second containing aluminum-contaminated water (CW) (530μgL⁻¹) released by sacrificial anode. The mussels were collected and examined over a period of 8weeks. A comparison between the aluminum concentrations in the digestive glands of mussels from the CW and NCW tanks shows that the highest value (1700mg/kgd.w.) was found in the CW mussels collected after 13days. In NCW, the mean aluminum concentration in digestive glands during the test was 281mg/kgd.w. The rapid concentration decrease in digestive glands is probably due to the inhibition of filtering activity due to valve closure at the high concentration as well as the induction of the detoxification response.