The In Situ Chemical Reduction (ISCR) process was tested in a nitisol in a French Caribbean banana plantation using five different soil amendments. The addition of 2.8% or 4.0% of Zero Valent Iron (ZVI; dw/dw, 2 different trial plots) in the 0–40-cm soil layer lowered the initial chlordecone (CLD) concentration by up to 74% or 69% in 37 days or 94 days, with 75% of the decrease achieved after only 21 or 24 days of treatment depending on the trial plot. The addition of commercially available Daramend® was also tested by applying the 6% dose (dw/dw) recommended by the manufacturer and using either the regular alfalfa-based product or a bagasse-based product specifically formulated for the study. Both significantly lowered CLD concentrations, but to a lesser extent than with the ZVI-only amendment. A bagasse-ZVI mixture prepared on site produced results slightly better than the two Daramend®. The percentage decreases in CLD concentrations were correlated with the negative redox potentials achieved. In all the trial plots, dechlorinated transformation products appeared in the soil and soil water as the CLD concentrations decreased, with H atoms replacing up to 4 and 7 of the 10 Cl atoms, respectively. None of these degradation products appeared to accumulate in the soil or soil water during the treatment. Instead, the reverse occurred, with an overall downward trend in their concentrations over time. The effects of ISCR treatment on agronomic and human health–related parameters were measured in three different crops. The radishes produced with some treatments were visually of lower quality or smaller in size than those grown in the control plots. Lower yields were observed for the cucumbers and sweet potatoes grown after applying the bagasse-based amendments. Mortality among cucumber seedlings was observed after treatment with ZVI only. Simple operational solutions should suffice to remedy these negative agronomic effects. As regards human health–related effects, the CLD concentrations in radishes grown with three of the amendments were significantly lower than in the two control plots and well below the maximum residue level (MRL), which was substantially exceeded in the radishes grown on untreated soil. For cucumbers, the treatments with regular Daramend® and with a local bagasse-ZVI mixture produced fruits with CLD below the MRL and also below the concentrations in one of the two control plots. As for the sweet potatoes, adding a bagasse-ZVI mixture had a significant positive effect by decreasing contamination below the levels in the two control plots and below the MRL.

Bauxite residue, an industrial alkaline solid waste, has a low organic carbon content which hinders plant growth. Dissolved organic matter (DOM) drives many biogeochemical processes including carbon storage and soil formation in soils. Input of exogenous organic materials may provide organic carbon and accelerate soil formation processes in bauxite residue. However, the potential effects of ameliorants on the quantity and quality of DOM in bauxite residue are still poorly understood. Here, the integration of ultraviolet–visible (UV–Vis) spectra, fluorescence spectra, and parallel factor (PARAFAC) analysis were used to investigate the vertical characteristics of DOM in bauxite residue treated by PV (the combined addition of 2% phosphogypsum and 4% vermicompost, w/w) and BS (6% w/w including 4% bagasse and 2% bran) with 2-year column experiments. The content of DOM in untreated residues ranged from 0.064 to 0.096 g/kg, whilst higher contents of DOM were observed in PV (0.13 g/kg) and BS (0.26 g/kg) treatment. Meanwhile, with the increase of residue depth, the aromaticity and hydrophobic components of DOM in residue decreased, which indicated that the degree of humification of the treated residues in the upper layer was higher than that in the lower layer. Compared with BR, BS and PV treatment accumulated the related content of fulvic acid-like substance from 36.14% to 71.33% and 74.86%, respectively. The incorporation of vermicompost and biosolids increased the content of humic-like substances, whilst decreasing the content of protein-like substances in the surface layer, which may be due to the enrichment of the microbial community. During soil formation processes, the application of organic amendments reduced both salinity and alkalinity, enhanced microbial community diversity, and changed the quantity and quality of DOM in bauxite residue. These findings improve our understanding of the dynamics of DOM and response of DOM to soil formation processes in bauxite residue.

Release of antibiotics into the environment, which often occurs downstream of wastewater treatment plants, poses a human health threat due to the potential development of bacterial antibiotic resistance. In this study, laboratory experiments were conducted to evaluate the performance of ball milled biochar on the removal of two sulfonamide antibiotics, sulfamethoxazole (SMX) and sulfapyridine (SPY) from water and wastewater. Aqueous batch sorption experiment using both pristine and ball milled biochar derived from bagasse (BG), bamboo (BB) and hickory chips (HC), made at three pyrolysis temperatures (300, 450, 600 °C), showed that ball milling greatly enhanced the SMX and SPY adsorption. The 450 °C ball milled HC biochar and BB biochar exhibited the best removal efficiency for SMX (83.3%) and SPY (89.6%), respectively. A range of functional groups were produced by ball milling, leading to the conclusion that the adsorption of sulfonamides on the biochars was controlled by multiple mechanisms including hydrophobic interaction, π–π interaction, hydrogen bonding, and electrostatic interaction. Due to the importance of electrostatic interaction, SMX and SPY adsorption was pH dependent. In laboratory water solutions, the Langmuir maximum adsorption capacities of SMX and SPY reached 100.3 mg/g and 57.9 mg/g, respectively. When tested in real wastewater solution, the 450 °C ball milled biochar still performed well, especially in the removal of SPY. The maximum adsorption capacities of SMX and SPY in wastewater were 25.7 mg/g and 58.6 mg/g, respectively. Thus, ball milled biochar has great potential for SMX and SPY removal from aqueous solutions including wastewater.

Although biomass fuel has always been regarded as a source of sustainable energy, it potentially emits polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). This study investigated PCDD/F emissions from industrial boilers fired with three types of biomass fuel (i.e., bagasse, coffee residue, and biomass pellets) via stack sampling and laboratory analysis. The measured mass concentrations of PCDD/Fs varied among the boilers from 0.0491 to 12.7 ng Nm⁻³ (11% O₂), with the calculated average international toxic equivalent quantity (I-TEQ) from 0.00195 to 1.71 ng I-TEQ Nm⁻³ (11% O₂). Some of them were beyond the limit value for municipal waste incineration. 2,3,4,7,8-PeCDF could be used as a good indicator of dioxin-induced toxicity of stack flue gases from biomass-fired boilers. The PCDFs/PCDDs ratios were more than 1, likely indicating the formation of dioxins in the boilers favored by de novo synthesis. The emission factor (EF) of total PCDD/Fs averaged 5.35 ng I-TEQ kg⁻¹ air-dry biomass (equivalent to 39.0 ng kg⁻¹ air-dry biomass). Specifically, the mean EF was 6.94 ng I-TEQ kg⁻¹ (52.6 ng kg⁻¹) for biomass-pellet-fired boiler, 11.8 ng I-TEQ kg⁻¹ (74.6 ng kg⁻¹) for coffee-residue -fired boiler, and 0.0277 ng I-TEQ kg⁻¹ (0.489 ng kg⁻¹) for bagasse-fired boilers. The annual PCDD/F emission was estimated to be 208 g I-TEQ in 2020 in China, accounting for approximately 2% of the total national annual emission of PCDD/Fs. The results can be used to develop PCDD/Fs emission inventories and offer valuable insights to authorities regarding utilizing biomass in industry in the future.

The materials used in electrical and electronic applications have great importance and broader applications, but they have severe electromagnetic interference (EMI). These materials have extensive applications in broadcasting, medical industries, research, defence sectors, communication and similar fields. The EMI can be addressed by using effective EMI shielding materials. This review presents a detailed, comprehensive description for making electromagnetic interference shielding material by recycling various wastes. It starts with highlighting the overview of electromagnetic interference shielding (EMI) and its theoretical aspects. It provides a comprehensive and detailed understanding of recent trends in the novel approaches towards fabricating EMI shielding from industrial waste, agricultural waste and other miscellaneous wastes. This paper critically reviews the works related to the recycling of wastes like red mud (waste from the aluminium refining industry), ground tyre rubber, tea waste (biowaste) from tea industries, bagasse (waste from sugar cane industry), peanut and hazelnut shells (agricultural waste), waste tissue paper and polyethylene and other miscellaneous wastes like hydrocarbon carbon black and ash for the fabrication of highly effective electromagnetic (EM) interference shielding materials. Highly effective results have been reported using red mud showing maximum efficiency of 51.4 dB in X-band range, various agricultural waste displaying reflection loss of up to − 87.117 dB (in the range 0.01 to 20 GHz) and miscellaneous waste giving EMI SE of 80 dB in X-band frequency. A separate section is dedicated to emphasizing future work and recommendations.

Biomass waste contributes 14% of the total global energy. And 15–20% of the coal-fine waste from coal mines are deposited in the rivers, ponds, etc., unused, which leads to resource wastage and environmental pollution. The present study aims utilizing biomass and coal-fine waste for producing biomass-coal briquettes without using a binding material. Three different average sizes 50, 134.3, and 199.7 μm of biomass mixture (bagasse, groundnut shell, and woodchips) and coal-fines were used to make different ratios of biomass and coal mixture briquettes. Then, it is subjected to proximate, scanning electron microscope/elemental (SEM/EDX) and thermo-gravimetric analysis (TGA) to understand its property. Proximate analysis results revealed that the biomass waste has the low ash, sensible fixed carbon, and high volatile matter content. A briquette of biomass: coal = 7:1 ratio 50-μm particle size case was chosen for SEM/EDX and TGA analysis since it holds reasonable fixed carbon value comparatively. SEM analysis revealed irregular surfaces, cracks, cavities and longitudinal cracks, veins distribution all around, ups and shallows on the surface and it is the most favorable condition for fuel combustion since oxidant reaches the core of the fuel with less resistant. TGA reconfirms the spontaneous burning characteristics of the entire volatiles and fixed carbon. EDX analysis shows that the carbon and potassium are the two major elements present in the tested briquettes.

Microbiological activities are essential in the bioremediation of polluted soils. The enzymatic activities of microorganisms are usually used as a biological indicator of soil health. The aim of this work was to observe the catalase, acid phosphatase (AcP), and alkaline phosphatase (AlP) activities in soil that was amended with agro-industrial by-products and macronutrients during the process of total petroleum hydrocarbon (TPH) removal. To this end, microcosm tests were performed with soil and agro-industrial by-products ratios of 100:2:2, for soil:sugarcane bagasse pith:filter cake mud (SSF); 100:2, for both soil:sugarcane bagasse pith (SS); and for soil filter cake mud (SF). The macronutrients—carbon, nitrogen, and phosphorus—in the experimental treatments were adjusted to 100:10:1 with a solution of NH₄NO₃ and K₂HPO₄. The best TPH removal (51.4%) was obtained with SSF at 15 days. In addition, a significant correlation was observed between TPH removal and AlP as well as AcP (r = 0.74, p < 0.0001; r = 0.70, p < 0.0107, respectively). Fungi growth was also correlated with both AlP (r = 0.97, p < 0.0001) and AcP (r = 0.95, p < 0.0001) activities. Besides, bacterial and fungi growth showed a correlation with TPH (r = 0.86, p < 0.001; r = 0.77, p < 0.0034, respectively). It could be said that the agro-industrial by-products and macronutrients contributed to pollutant removal from the oil-polluted soil at relatively short amount of time. In addition, the enzymatic activities were increased after the treatment; in this study, the high sensitivity enzyme was AlP, and it could be used as an indirect indicator of oil pollutant removal.

The fixed-bed column biosorption process is the most widely used system, which aims to expand to industrial scale in wastewater treatment, and requires for its design thermodynamic equilibrium data. In this study, fixed-bed column experiments using malt bagasse, an industrial byproduct, were performed to quantitatively evaluate the dye biosorption capacity, as well as perform mathematical modeling of the breakthrough curves and obtain mass transfer parameters. The FTIR spectrum of malt bagasse was performed before and after the dye biosorption process. The best operating condition of the column occurred at the feed flow of 4mLmin⁻ ¹. The Langmuir isotherm (qₘₐₓ = 38.44mgg⁻ ¹; R² = 0.98) was used to represent the equilibrium data between the phases (fluid/solid) in column. The phenomenological mathematical model, which considered the resistance to internal diffusion as a limiting step of mass transfer, was able to adequately predict the dynamic behavior of the biosorption column operation, constituting a useful tool for analysis, description, and design of dye biosorption in fixed-bed column.

The use of plant-derived sorbent was investigated as a remediation strategy for low-energy intertidal wetlands contaminated by crude oil spills. Effectiveness of plant-derived sorbent as a wicking agent was evaluated in microcosms simulating intertidal wetlands. Microcosms were designed to impose three different oil penetration depths (0.25, 0.5, and 1.0 cm), two different tidal amplitudes (±5 and ±10 cm above oil-contaminated surface), and two different types of sorbents (raw bagasse and hydrophobic-treated bagasse). We observed that the use of plant-derived sorbent was beneficial not only in removing oil but also in preventing further contamination. Oil penetration depth and tidal amplitude both negatively influenced the effectiveness of the sorbent. Effectiveness of the hydrophobic-treated sorbent was always higher than that of untreated one at any given oil penetration depth and tidal amplitude. Effectiveness of hydrophobic-treated sorbent was relatively low compared to that of raw bagasse. The most plausible explanation is that oil wicking mainly occurred during low tide. From a cost-effectiveness point of view, we suggest the use of raw bagasse immediately after an oil spill for remediation of low-energy intertidal wetlands. The observed results imply that this technique has potential to stimulate biodegradation by wicking oil out of contaminated intertidal wetlands subsurface to the aerobic zone where biodegradation can take place.

Sulphuric acid-modified bagasse has been used as low-cost adsorbent for the removal of methylene blue (MB) dye from aqueous solution. In order to remove organic compounds that contribute to chemical oxygen demand (COD), pretreatment with thorough washing of adsorbent using boiling distilled water was performed instead of conventional washing using distilled water at room temperature only. This has resulted in the highest efficiency of color removal of 99.45% and COD reduction of 99.36% for MB dye solution at pH 9. Effects of initial pH, dye concentration, adsorbent dosage, temperature, and contact time have been studied. The adsorption of MB dye was pH dependent. Langmuir and Freundlich isotherm models were tested on the adsorption data. The kinetic experimental data were analyzed using pseudo-first order, pseudo-second order, and the intraparticle diffusion model in order to examine the adsorption mechanisms. The adsorption process followed the Langmuir isotherm as well as the Freundlich isotherm and pseudo-second-order kinetic model. The process was found to be endothermic in nature.