خيارات البحث
النتائج 1 - 10 من 22
Ultra-trace level determination of neonicotinoids in honey as a tool for assessing environmental contamination
2019
Kammoun, Souad | Mulhauser, Blaise | Aebi, Alexandre | Mitchell, Edward A.D. | Glauser, Gaétan
Neonicotinoids and the closely related insecticide classes sulfoximines and butenolides have recently attracted growing concerns regarding their potential negative effects on non-target organisms, including pollinators such as bees. Indeed, it is becoming increasingly clear that these effects may occur at much lower levels than those considered to be safe for humans. To properly assess the ecological and environmental risks posed by neonicotinoids, appropriate sampling and analytical procedures are needed. Here, we used honey as reliable environmental sampler and developed an unprecedentedly sensitive method based on QuEChERS and UHPLC-MS/MS for the simultaneous determination of the nine neonicotinoids and related molecules currently present on the market (acetamiprid, clothianidin, dinotefuran, flupyradifurone, imidacloprid, nitenpyram, sulfoxaflor, thiacloprid and thiamethoxam). The method was validated and provided excellent levels of precision and accuracy over a wide concentration range of 3–4 orders of magnitude. Lowest limits of quantification (LLOQs) as low as 2–20 pg/g of honey depending on the analytes were reached. The method was then applied to the analysis of 36 honey samples from various regions of the World which had already been analysed for the five most common neonicotinoids (acetamiprid, clothianidin, imidacloprid, thiacloprid and thiamethoxam) in a previous study. This allowed us to determine the long-term stability (i.e. up to 40 months) of these molecules in honey, both at room temperature and −20 °C. We found that the five pesticides were stable over a period of several years at −20 °C, but that acetamiprid and thiacloprid partially degraded at room temperature. Finally, we also measured the levels of dinotefuran, nitenpyram, sulfoxaflor and flupyradifurone and found that 28% of the samples were contaminated by at least one of these pesticides.
اظهر المزيد [+] اقل [-]A review of the factors that influence pesticide residues in pollen and nectar: Future research requirements for optimising the estimation of pollinator exposure
2019
Gierer, Fiona | Vaughan, Sarah | Slater, Mark | Thompson, Helen M. | Elmore, J Stephen | Girling, Robbie D.
In recent years, the impact of Plant Protection Products (PPPs) on insect pollinator decline has stimulated significant amounts of research, as well as political and public interest. PPP residues have been found in various bee-related matrices, resulting in governmental bodies worldwide releasing guidance documents on methods for the assessment of the overall risk of PPPs to different bee species. An essential part of these risk assessments are PPP residues found in pollen and nectar, as they represent a key route of exposure. However, PPP residue values in these matrices exhibit large variations and are not available for many PPPs and crop species combinations, which results in inaccurate estimations and uncertainties in risk evaluation. Additionally, residue studies on pollen and nectar are expensive and practically challenging. An extrapolation between different cropping scenarios and PPPs is not yet justified, as the behaviour of PPPs in pollen and nectar is poorly understood. Therefore, this review aims to contribute to a better knowledge and understanding of the fate of PPP residues in pollen and nectar and to outline knowledge gaps and future research needs. The literature suggests that four primary factors, the crop type, the application method, the physicochemical properties of a compound and the environmental conditions have the greatest influence on PPP residues in pollen and nectar. However, these factors consist of many sub-factors and initial effects may be disguised by different sampling methodologies, impeding their exact characterisation. Moreover, knowledge about these factors is ambiguous and restricted to a few compounds and plant species. We propose that future research should concentrate on identifying relationships and common features amongst various PPP applications and crops, as well as an overall quantification of the described parameters; in order to enable a reliable estimation of PPP residues in pollen, nectar and other bee matrices.
اظهر المزيد [+] اقل [-]The effects of aluminum and nickel in nectar on the foraging behavior of bumblebees
2013
Meindl, George A. | Ashman, Tia-Lynn
Metals in soil are known to negatively affect the health of many groups of organisms, but it is unclear whether they can affect plant-pollinator interactions, and whether pollinators that visit plants growing on contaminated soils are at risk of ingesting potentially toxic resources. We address whether the presence of metals in nectar alters foraging behavior by bumblebees by manipulating nectar with one of two common soil contaminants (Al or Ni) in flowers of Impatiens capensis (Balsaminaceae). While the presence of Al in nectar did not influence foraging patterns by bumblebees, flowers containing Ni nectar solutions were visited for shorter time periods relative to controls, and discouraged bees from visiting nearby Ni-contaminated flowers. However, because bumblebees still visited these flowers, they likely ingested a potentially toxic resource. Our findings suggest that soil metals could cascade to negatively affect pollinators in metal contaminated environments.
اظهر المزيد [+] اقل [-]Bees, honey and pollen as sentinels for lead environmental contamination
2012
Lambert, Olivier | Piroux, Mélanie | Puyo, Sophie | Thorin, Chantal | Larhantec, Michaëlle | Delbac, Frédéric | Pouliquen, Hervé
Three beehive matrices, sampled in eighteen apiaries from West France, were analysed for the presence of lead (Pb). Samples were collected during four different periods in both 2008 and 2009. Honey was the matrix the least contaminated by Pb (min = 0.004 μg g⁻¹; max = 0.378 μg g⁻¹; mean = 0.047 μg g⁻¹; sd = 0.057). The contamination of bees (min = 0.001 μg g⁻¹; max = 1.869 μg g⁻¹; mean = 0.223 μg g⁻¹; sd = 0.217) and pollen (min = 0.004 μg g⁻¹; max = 0.798 μg g⁻¹; mean = 0.240 μg g⁻¹; sd = 0.200) showed similar levels and temporal variations but bees seemed to be more sensitive bringing out the peaks of Pb contamination. Apiaries in urban and hedgerow landscapes appeared more contaminated than apiaries in cultivated and island landscapes. Sampling period had a significant effect on Pb contamination with higher Pb concentrations determined in dry seasons.
اظهر المزيد [+] اقل [-]Distribution and source identification of polychlorinated naphthalenes in bees, bee pollen, and wax from China
2022
Qi, Suzhen | Dong, Shujun | Zhao, Yazhou | Zhang, Su | Zhao, Yin | Liu, Zhaoyong | Zou, Yun | Wang, Peilong | Wu, Liming
Polychlorinated naphthalenes (PCNs) are highly toxic and persistent organic pollutants that can cause adverse effects in the environment and on human health. PCNs have been detected in remote areas because of their long-range transportation. Bees and bee products are commonly used as biomonitors for various pollutants in the environment. However, information on PCNs in apiaries is scarce. The aim of this study was to evaluate the occurrences of PCNs in bees and bee products from apiaries located in different geographical regions of China, and to identify potential pollution sources and assess exposure risks to humans. Our results showed that the average Σ₇₅PCNs concentrations in bees, pollen, and wax were 74.1, 96.3, and 141 pg/g dry weight, respectively. The homologue and congener profiles of PCNs in bees, pollen, and wax were similar, and di- and tri-chlorinated naphthalenes (>60%) were the predominant homologues. The concentrations and distributions of PCNs in bees, pollen, and wax varied among different geographical regions, but their occurrences were correlated with PCN metallurgical sources in China. The health risks of PCNs in pollen were evaluated, and both carcinogenic and non-carcinogenic risks of PCNs exposure to humans through the diet were low.
اظهر المزيد [+] اقل [-]Evaluation of microplastic pollution using bee colonies : An exploration of various sampling methodologies
2024
Cortés-Corrales, Laura | Flores, Jose Javier | Rosa, Adrian | van der Steen, Jozef J.M. | Vejsnæs, Flemming | Roessink, Ivo | Martínez-Bueno, Maria Jesús | Fernández-Alba, Amadeo R.
Recent research has highlighted the potential of honeybees and bee products as biological samplers for monitoring xenobiotic pollutants. However, the effectiveness of these biological samplers in tracking microplastics (MPs) has not yet been explored. This study evaluates several methods of sampling MPs, using honeybees, pollen, and a novel in-hive passive sampler named the APITrap. The collected samples were characterized using a stereomicroscopy to count and categorise MPs by morphology, colour, and type. To chemical identification, a micro-Fourier transform-infrared (FTIR) spectroscopy was employed to determine the polymer types. The study was conducted across four consecutive surveillance programmes, in five different apiaries in Denmark. Our findings indicated that APITrap demonstrated better reproducibility, with a lower variation in results of 39%, compared to 111% for honeybee samples and 97% for pollen samples. Furthermore, the use of APITrap has no negative impact on bees and can be easily applied in successive samplings. The average number of MPs detected in the four monitoring studies ranged from 39 to 67 in the APITrap, 6 to 9 in honeybee samples, and 6 to 11 in pollen samples. Fibres were the most frequently found, accounting for an average of 91% of the total MPs detected in the APITrap, and similar values for fragments (5%) and films (4%). The MPs were predominantly coloured black, blue, green and red. Spectroscopy analysis confirmed the presence of up to five different synthetic polymers. Polyethylene terephthalate (PET) was the most common in case of fibres and similarly to polypropylene (PP), polyethylene (PE), polyacrylonitrile (PAN) and polyamide (PA) in non fibrous MPs. This study, based on citizen science and supported by beekeepers, highlights the potential of MPs to accumulate in beehives. It also shows that the APITrap provides a highly reliable and comprehensive approach for sampling in large-scale monitoring studies.
اظهر المزيد [+] اقل [-]Tracing natural and industrial contamination and lead isotopic compositions in an Australian native bee species
2018
Zhou, Xiaoteng | Taylor, Mark Patrick | Davies, Peter J.
This study investigates trace element concentrations (arsenic (As), manganese (Mn), lead (Pb) and zinc (Zn)) and Pb isotopic compositions in an Australian native bee species, Tetragonula carbonaria, and its products of honey and wax. Co-located soil and dust samples were simultaneously analysed with the objective of determining if the bees or their products had potential application as a proxy for monitoring environmental contamination. The most significant relationships were found between Pb concentrations in honey (r = 0.814, p = 0.014) and wax (r = 0.883, p = 0.004) and those in co-located dust samples. In addition, Zn concentrations in honey and soil were significantly associated (r = 0.709, p = 0.049). Lead isotopic compositions of native bee products collected from background sites adjacent to Sydney national parks (²⁰⁶Pb/²⁰⁷Pb = 1.144, ²⁰⁸Pb/²⁰⁷Pb = 2.437) corresponded to local geogenic rock and soil values (²⁰⁶Pb/²⁰⁷Pb = 1.123–1.176, ²⁰⁸Pb/²⁰⁷Pb = 2.413–2.500). By contrast, inner Sydney metropolitan samples, including native bees and wax (²⁰⁶Pb/²⁰⁷Pb = 1.072–1.121, ²⁰⁸Pb/²⁰⁷Pb = 2.348–2.409), co-located soil and dust (²⁰⁶Pb/²⁰⁷Pb = 1.090–1.122, ²⁰⁸Pb/²⁰⁷Pb = 2.368–2.403), corresponded most closely to aerosols collected during the period of leaded petrol use (²⁰⁶Pb/²⁰⁷Pb = 1.067–1.148, ²⁰⁸Pb/²⁰⁷Pb = 2.341–2.410). A large range of Pb isotopic compositions in beehive samples suggests that other legacy sources, such as Pb-based paints and industrials, may have also contributed to Pb contamination in beehive samples. Native bee data were compared to corresponding samples from the more common European honey bee (Apis mellifera). Although Pb isotopic compositions were similar in both species, significant differences in trace element concentrations were evident across the trace element suite, the bees and their products. The statistical association between T. carbonaria and co-located environmental contaminant concentrations were stronger than those in European honey bees, which may be attributable to its smaller foraging distance (0.3–0.7 km versus 5–9 km, respectively). This implies that T. carbonaria may be more suitable for assessing small spatial scale variations of trace element concentrations than European honey bees.
اظهر المزيد [+] اقل [-]Bee pollens as biological indicators: An ecological assessment of pollution in Northern Turkey via ICP-MS and XPS analyses
2022
Şeker, Mehmet Emin | Erdoğan, Ayşegül | Korkmaz, Seda Dicle | Küplülü, Özlem
In this study, pollens were collected from 25 different locations of Northern Turkey to investigate pollution monitoring. Surface chemistry of pollen samples was characterized by X-ray photoelectron spectroscopy (XPS). Then the concentrations of certain elements (Li, Al, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Cd, Ba, and Pb) in pollen samples were determined by inductively coupled plasma mass spectrometry (ICP-MS) for the evaluation of environmental pollution. The levels of elements were detected in the following ranges (minimum–maximum, mg/kg dry pollen): Li (0.18–0.39), Al (24.98–308.04), V (6.18–98.58), Cr (1.05–6.81), Mn (13.85–95.91), Fe (52.20–326.26), Co (0.15–0.34), Ni (1.66–10.79), Cu (8.61–19.01), Zn (20.47–70.02), As (1.22–2.65), Se (0.39–0.67), Cd (0.05–0.74), Ba (0.73–16.30), and Pb (0.00–0.26). It has been concluded that there is a correlation between the pollen samples with high heavy metal concentrations and traffic density as these regions are closer to the road in the northern region. It is exposed to pollution from various sources such as intensified urbanization and tourism activities carried out on land and sea; industrial activities are increasing rapidly due to the opportunities offered by the coastal areas, sea transportation, and agricultural, domestic, and industrial pollution coming from the inner regions through rivers and streams. In this sense, pollens can be used as potential bio-indicators for monitoring heavy metal pollution and gives an idea about how we can use them for future assessing purposes.
اظهر المزيد [+] اقل [-]Neonicotinoid residues in honey from urban and rural environments
2021
Kavanagh, Saorla | Henry, Michael | Stout, Jane C. | White, Blánaid
Pesticide residues in honey can negatively affect bee health. Although recent studies have detected neonicotinoid residues in honeys from around the world, little is known about how residues relate to land use and vegetation composition. To investigate potential relationships, we sampled multi-floral honey from 30 Apis mellifera hives from urban, agricultural and semi-natural habitats (SNH), identified and quantified three neonicotinoids present (clothianidin, imidacloprid and thiacloprid) using UHPLC-MS, and classified surrounding land use up to 5 km around hive sites. Neonicotinoids were most frequently detected in honeys from hives in agricultural habitats, and 70% of all samples contained at least one of the three neonicotinoid compounds. Imidacloprid was the most frequently detected neonicotinoid (found in 43% of honey samples) followed by clothianidin (40%) and thiacloprid (37%). Almost half (48%) of samples contained at least two neonicotinoids, and two of the 30 samples contained all three. Clothianidin and thiacloprid were more frequently detected in honeys from urban habitats, highlighting that exposure to pesticides does not just occur in agricultural settings. This suggests that pesticide use in urban domestic, sport and amenity contexts, given potential exposure of bees and other pollinators, needs urgent consideration.
اظهر المزيد [+] اقل [-]The effects of field-realistic doses of imidacloprid on Melipona quadrifasciata (Apidae: Meliponini) workers
2020
Brito, Pedro | Elias, Marcos | Silva-Neto, Carlos | Sujii, Edison | Silva, Daniela | Gonçalves, Bruno | Franceschinelli, Edivani
The presence of Brazilian native bees can improve tomato production by increasing pollination effectiveness. However, the extensive use of pesticides in tomato cultures may be harmful to bees. Imidacloprid-based insecticides are used in tomato plantations because of its high efficiency against tomato pests. This study investigated the effects of oral intake of field-realistic concentrations of imidacloprid by M. quadrifasciata workers, a stingless native bee from Brazil and effective pollinators of tomato crops. The oral intake of sucrose syrup added with 10, 35, or 70 ppb of imidacloprid did not increase the mortality rate when compared with the control group. However, we observed a reduction in the workers’ motility and food consumption. We also treated M. quadrifasciata workers with sucrose syrup mixed with an imidacloprid-based insecticide (Evidence 700 WG®, Bayer), with the final concentration of 250 ppb of imidacloprid. This treatment did not cause visible alterations of the intestine absorptive cells of the bees’ midgut and did not increase DNA damage. Therefore, the observed reduction of food consumption and locomotion behavior of M. quadrifasciata workers may contribute to the global effort to understand the contribution of neonicotinoids on bees’ population decline process.
اظهر المزيد [+] اقل [-]