An experiment was performed to explore the interactive impacts of zinc oxide nanoparticles (ZnO NPs) and cadmium (Cd) on growth, yield, antioxidant enzymes, Cd and zinc (Zn) concentrations in wheat (Triticum aestivum). The ZnO NPs were applied both in Cd-contaminated soil and foliar spray (in separate studies) on wheat at different intervals and plants were harvested after physiological maturity. Results depicted that ZnO NPs enhanced the growth, photosynthesis, and grain yield, whereas Cd and Zn concentrations decreased and increased respectively in wheat shoots, roots and grains. The Cd concentrations in the grains were decreased by 30–77%, and 16–78% with foliar and soil application of NPs as compared to the control, respectively. The ZnO NPs reduced the electrolyte leakage while increased SOD and POD activities in leaves of wheat. It can be concluded that ZnO NPs (levels used in the study) could effectively reduce the toxicity and concentration of Cd in wheat whereas increase the Zn concentration in wheat. Thus, ZnO NPs might be helpful in decreasing Cd and increasing Zn biofortification in cereals which might be effective to reduce the hidden hunger in humans owing the deficiency of Zn in cereals.

The accurate assessment of soil selenium (Se) bioavailability is crucial for Se biofortification in Se-deficient areas and risk assessment in selenosis areas. However, a universally accepted approach to evaluate Se bioavailability in soil is currently lacking. This research investigated Se bioavailability in six soils treated with selenite (Se(IV)) or selenate (Se(VI)) by comparing diffusive gradients in thin-films (DGT) technique and chemical extraction methods through pot experiments. A bioindicator method was used to evaluate Se concentrations in pak choi and compare the results with the Se concentration measured by other methods. Results showed that chemical extraction methods presented different extraction efficiencies for available Se over a range of soil types, and the same extraction method had various extraction efficiencies for different Se species in the same soil. DGT measured Se concentrations (CDGT−Se) for Se(VI) treatment were 2.3–34.1 times of those for Se(IV) treatment. KH2PO4–K2HPO4 and AB-DTPA extractable Se could predict the bioavailability of soil Se, but they were disturbed by soil properties. HAc extraction was unsuitable for evaluating Se bioavailability in different Se(IV)-treated soils. By contrast, DGT technique was preferable for predicting plant uptake of Se(IV) over chemical extraction methods. Although DGT technique was independent of soil properties, KH2PO4–K2HPO4 extraction provided the best fitting regression equation for Se(VI) when it was dependent on soil organic matter. Thus, KH2PO4–K2HPO4 extraction may be preferred to assess Se(VI) bioavailability in different soil types on a large scale.

Micronutrient deficiencies are prevalent health problems worldwide. The maintenance of adequate concentrations of micronutrients in maize grain is crucial for human health. We investigated the overall status and geospatial variation of micronutrients in Chinese maize grains and identified their key drivers. A field survey was conducted in four major maize production areas of China in 2017 with 980 pairs of soil and grain samples collected from famers’ fields. At a national scale, grain zinc (Zn), iron (Fe), manganese (Mn) and copper (Cu) concentrations varied substantially, with average values of 17.4, 17.3, 4.9, and 1.5 mg kg⁻¹, respectively, suggesting a solid gap between grain Zn and Fe concentrations and the biofortification target values. Significant regional difference in the concentrations of Zn, Mn and Cu, but not Fe, were observed in grain, with much higher levels in Southwest China. The nutritional yields of Zn, Fe and Cu were lower than the energy and Mn yields, indicating an unbalanced output between energy and micronutrients in current maize production system. Grain Zn, Fe, Mn and Cu correlated negatively with maize yield in most test regions. Increased nitrogen (N) rate positively affected grain Zn and Cu, while increased phosphorus (P) rate negatively affects grain Zn and Fe. Apart from Fe, available Zn, Mn and Cu in soil exerted significant positive effects on grain Zn, Mn and Cu concentrations, respectively. Decrease in soil pH and increase in the organic matter content may increase the accumulation of Fe and Mn in grain. Grain Zn and Cu concentrations increased as available soil P decreased. Of the factors considered in this study, grain yield, N and P rates, soil pH and organic matter were the main factors that affect grain micronutrient status and should be more extensively considered in the production and nutritional quality of maize grain.

Selenium (Se) speciation in soil is critically important for understanding the solubility, mobility, bioavailability, and toxicity of Se in the environment. In this study, Se fractionation and chemical speciation in agricultural soils from seleniferous areas were investigated using the elaborate sequential extraction and X-ray absorption near-edge structure (XANES) spectroscopy. The speciation results quantified by XANES technique generally agreed with those obtained by sequential extraction, and the combination of both approaches can reliably characterize Se speciation in soils. Results showed that dominant organic Se (56–81%) and lesser Se(IV) (19–44%) were observed in seleniferous agricultural soils. A significant decrease in the proportion of organic Se to the total Se was found in different types of soil, i.e., paddy soil (81%) > uncultivated soil (69–73%) > upland soil (56–63%), while that of Se(IV) presented an inverse tendency. This suggests that Se speciation in agricultural soils can be significantly influenced by different cropping systems. Organic Se in seleniferous agricultural soils was probably derived from plant litter, which provides a significant insight for phytoremediation in Se-laden ecosystems and biofortification in Se-deficient areas. Furthermore, elevated organic Se in soils could result in higher Se accumulation in crops and further potential chronic Se toxicity to local residents in seleniferous areas.

Phytoremediation coupled with agro-production is considered a sustainable strategy for remediation of trace element contaminated fields without interrupting crop production. In this study hyperaccumulator Sedum alfredii was intercropped with a leguminous plant fava bean (Vicia fava) in cadmium (Cd) and lead (Pb) co-contaminated field to evaluate the effects of intercropping on growth performance and accumulations of trace elements in plants with plant growth promoting endophyte (PGPE) consortium application. The results showed, compared with monoculture, intercropping coupled with inoculation application promoted biomass as well as Cd and Pb concentrations in individual parts of both plants, thus increasing the removal efficiencies of trace elements (4.49-folds for Cd and 5.41-folds for Pb). Meanwhile, this superposition biofortification measure maintained normal yield and nutrient content, and limited the concentration of Cd and Pb within the permissible limit (<0.2 mg kg⁻¹ FW) in fava bean during the grain production. These results demonstrated a feasible technical system for phytoremediation coupled with agro-production in slightly or moderately Cd and Pb co-contaminated field, and also provided useful information for further investigation of interaction mechanisms between intercropping and PGPEs inoculation.

Delay sowing of wheat is a common problem in Punjab that exacerbates serious yield loss. To reduce yield loss and improve yield, different combinations of foliar-applied bioregulator and micronutrients, control (CK), zinc (Zn), boron (B), thiourea (TU), Zn + B (ZnB), Zn + TU (ZnTU), B + TU (BTU), Zn + B + TU (ZnBTU) were applied at booting and grain filling stages in delayed sown wheat in 2017–18 and 2018–19. The results showed that ZnBTU treatment significantly increased leaf area index by 25.06% and 23.21%, spike length by 15.11% and 19.65% in 2017 and 2018, respectively, compared to CK. The ZnBTU treatment also increased 1000-grain weight by 21.96% and 22.01% in 2017 and 2018, respectively, compared to CK. Similarly, higher Zn, B and N contents in straw and grain were recoded for ZnBTU treatment which was statistically similar to ZnB and ZnTU treatments. Overall, ZnBTU treatment also increased the photosynthetic rate, transpiration rate, stomatal conductance by 46.67%, 26.03%, 76.25% and decreased internal CO₂ by 28.18%, compared to CK, respectively. Moreover, ZnBTU also recorded the highest grain yield in 2017–18 (25.05%) and 2018–19 (28.49%) than CK. In conclusion, foliar application of ZnBTU at the booting and grain filling stages of delayed sown wheat could be a promising strategy to increase grain yield.

The foliar application of selenium (Se) is an effective method for biofortification of Se in crop grains in order to provide sufficient Se for human health. As a staple food in China, the foxtail millet (Setaria italica L.), which had been Se biofortification, would be helpful to overcome Se deficiency in the diet. The Se fertilizer and its application technology are vital for reducing environmental risk while enriching selenium. Hence, the Se-rich nutrient solution developed by ourselves was used, and the effect of its amount and growth stage applied on the accumulation of Se in grains of foxtail millet (Setaria italica L.) was studied in the present study. The results were as follows: (1) the Se concentration in grains increased with the Se application rate increasing, and the highest Se concentration in grains was 1.83 mg kg⁻¹ at the sprayed concentration of 61.5 gSe hm⁻²; (2) the accumulation of Se sprayed in the grain-filling stage was 1.3–1.6 times higher than that in the joint stage; and (3) the organ damage could be found under low Se/S ratio, which happened in the rice leaves when the Se rate was higher than 76.875 gSe m⁻² with the low sulfate application compared with the formulation. This Se-rich nutrient solution could be used to produce the Se-rich millet grains and foliar application in the reproductive stage to produce qualified Se-rich millet.

Cardamine violifolia is the only selenium hyperaccumulation plant found in China. It has been developed as a source of medicinal and edible products that we can consume as selenium supplements. Many planting approaches have been developed to increase the selenium content of C. violifolia for nutrient biofortification. However, the contribution of rhizosphere microbes of C. violifolia to selenium enrichment has not been investigated. In this study, four types of selenium, i.e., selenate, selenite, nanoparticles selenium from Bacillus subtilis (B. subtilis-Se), and organic selenium from yeast (yeast-Se), were added to the soil that C. violifolia was grown in, respectively. Selenate led to the greatest accumulation of selenium in C. violifolia, followed by selenite, B. subtilis-Se, and yeast-Se. Except for yeast-Se, the concentration of selenium in C. violifolia positively correlated with the amount of selenium added to the soil. Furthermore, the different types of exogenous selenium exhibited distinct effects on the rhizosphere microbiome of C. violifolia. Alpha and beta diversity analyses demonstrated that rhizosphere microbiome was more obviously affected by selenium from B. subtilis and yeast than from selenate and selenite. Different microbial species were enriched in the rhizosphere of C. violifolia under various exogenous selenium treatments. B. subtilis-Se application enhanced the abundance of Leucobacter, Sporosarcina, Patulibacter, and Denitrobacter, and yeast-Se application enriched the abundance of Singulishaera, Lactobacillus, Bdellovibrio, and Bosea. Bosea and the taxon belonging to the order Solirubrobacterales were enriched in the samples with selenate and selenite addition, respectively, and the abundances of these were linearly related to the concentrations of selenate and selenite applied in the rhizosphere of C. violifolia. In summary, this study revealed the response of the rhizosphere microbiome of C. violifolia to exogenous selenium. Our findings are useful for developing suitable selenium fertilizers to increase the selenium hyperaccumulation level of this plant.

Agronomic selenium (Se) biofortification of grain crops is considered the best method for increasing human Se intake, which may help people alleviate Se-deficiency. To investigate the efficiency of agronomic Se biofortification of oat, four Se fertilizer application treatments were tested: topsoil (T), foliar (S), the combination of T and S (TS), and control without Se application (CK). Compared with CK, TS significantly increased the 1000-grain weight, grain yield, Se contents in all parts of oats, contents of soil available N, K, and organic matter by 18%, 8.70%, 19.7–60.2%, 6.00%, 8.02%, and 17.95%, respectively. Leaves, roots, and ears had the highest conversion rate of exogenous Se in S (644.63%), T (416.00%), and TS (273.20%), respectively. TS also increased the activities of soil urease, alkaline phosphatase, and sucrose and the diversity of soil bacterial communities. TS and T increased the relative abundance of bacteria involved in the decomposition of organic matter, such as Actinobacteria, Gemmatimonadetes, Chloroflexi, and Bacteroidetes positively correlated with soil nutrients and enzyme activities, and reduced Proteobacteria and Firmicutes negatively correlated with them, Granulicella, Bacillus, Raoultella, Lactococcus, Klebsiella, and Pseudomonas. Furthermore, TS significantly increased the relative abundance of Planctomycetes, Chlorobi, Nitrospinae, Nitrospirae, Aciditeromonas, Gemmatimonas, Geobacter, and Thiobacter. T significantly increased the abundance of Lysobacter, Holophaga, Candidatus-Koribacter, Povalibacter, and Pyrinomonas. S did not significantly change the bacterial communities. Thus, a combined foliar and soil Se fertilizer proved conducive for achieving higher yield, grain Se content, and improving Se transport, the diversity of rhizosphere bacterial community, and bacterial functions in oats.

The biosphere is polluted with metals due to burning of fossil fuels, pesticides, fertilizers, and mining. The metals interfere with soil conservations such as contaminating aqueous waste streams and groundwater, and the evidence of this has been recorded since 1900. Heavy metals also impact human health; therefore, the emancipation of the environment from these environmental pollutants is critical. Traditionally, techniques to remove these metals include soil washing, removal, and excavation. Metal-accumulating plants could be utilized to remove these metal pollutants which would be an alternative option that would simultaneously benefit commercially and at the same time clean the environment from these pollutants. Commercial application of pollutant metals includes biofortification, phytomining, phytoremediation, and intercropping. This review discusses about the metal-accumulating plants, mechanism of metal accumulation, enhancement of metal accumulation, potential commercial applications, research trends, and research progress to enhance the metal accumulation, benefits, and limitations of metal accumulators. The review identified that the metal accumulator plants only survive in low or medium polluted environments with heavy metals. Also, more research is required about metal accumulators in terms of genetics, breeding potential, agronomics, and the disease spectrum. Moreover, metal accumulators’ ability to uptake metals need to be optimized by enhancing metal transportation, transformation, tolerance to toxicity, and volatilization in the plant. This review would benefit the industries and environment management authorities as it provides up-to-date research information about the metal accumulators, limitation of the technology, and what could be done to improve the metal enhancement in the future.