خيارات البحث
النتائج 1 - 10 من 307
Palm oil industrial wastes as a promising feedstock for biohydrogen production: A comprehensive review
2021
Ong, Ee Shen | Rabbani, Alija Haydar | Habashy, Mahmoud M. | Abdeldayem, Omar M. | Al-Sakkari, Eslam G. | Rene, Eldon R.
By the year 2050, it is estimated that the demand for palm oil is expected to reach an enormous amount of 240 Mt. With a huge demand in the future for palm oil, it is expected that oil palm by-products will rise with the increasing demand. This represents a golden opportunity for sustainable biohydrogen production using oil palm biomass and palm oil mill effluent (POME) as the renewable feedstock. Among the different biological methods for biohydrogen production, dark fermentation and photo-fermentation have been widely studied for their potential to produce biohydrogen by using various waste materials as feedstock, including POME and oil palm biomass. However, the complex structure of oil palm biomass and POME, such as the lignocellulosic composition, limits fermentable substrate available for conversion to biohydrogen. Therefore, proper pre-treatment and suitable process conditions are crucial for effective biohydrogen generation from these feedstocks. In this review, the characteristics of palm oil industrial waste, the process used for biohydrogen production using palm oil industrial waste, their pros and cons, and the influence of various factors have been discussed, as well as a comparison between studies in terms of types of reactors, pre-treatment strategies, the microbial culture used, and optimum operating condition have been presented. Through biological production, hydrogen production rates up to 52 L-H₂/L-medium/h and 6 L-H₂/L-medium/h for solid and liquid palm oil industrial waste, respectively, can be achieved. In short, the continuous supply of palm oil production by-product and relatively, the low cost of the biological method for hydrogen production indicates the potential source of renewable energy.
اظهر المزيد [+] اقل [-]PAHs in an urban-industrial area: The role of lichen transplants in the detection of local and study area scale patterns
2021
Lucadamo, L. | Gallo, L. | Corapi, A.
Spatial variation of the levels of polycyclic aromatic hydrocarbons (PAHs) was evaluated within an urban-industrial district where the main anthropogenic pressures are a 15 MW biomass power plant (BPP) and road traffic. The use of a high-density lichen transplant network and wind quantitative relationships made it possible to perform a hierarchical analysis of contamination. Combined uni-bi and multivariate statistical analyses of the resulting databases revealed a dual pattern. In its surroundings (local scale), the BPP affected the bioaccumulation of fluoranthene, pyrene and total PAHs, although a confounding effect of traffic (mostly petrol/gasoline engines) was evident. Spatial variation of the rate of diesel vehicles showed a significant association with that of acenaphthylene, acenaphthene, fluorene, anthracene and naphthalene. The series of high-speed wind values suggests that wind promotes diffusion rather than dispersion of the monitored PAHs. At the whole study area scale, the BPP was a source of acenaphthylene and acenaphthene, while diesel vehicles were a source of acenaphthylene. PAHs contamination strongly promotes oxidative stress (a threefold increase vs pre-exposure levels) in lichen transplants, suggesting a marked polluting effect of anthropogenic sources especially at the expense of the mycobiont. The proposed monitoring approach could improve the apportionment of the different contributions of point and linear anthropogenic sources of PAHs, mitigating the reciprocal biases affecting their spatial patterns.
اظهر المزيد [+] اقل [-]Using hydrogen peroxide to control cyanobacterial blooms: A mesocosm study focused on the effects of algal density in Lake Chaohu, China
2021
Chen, Chao | Wang, Yiyao | Chen, Kaining | Shi, Xiaoli | Yang, Gang
The application of hydrogen peroxide (H₂O₂) to control harmful algal blooms is affected by algal density and species. In the present study, a simulation field study was carried out to evaluate the removal of cyanobacteria with high algal density (chlorophyll a of approximately 220–250 μg/L) and low algal density (chlorophyll a of approximately 30–50 μg/L) using 10, 20 mg/L H₂O₂ and 5 mg/L H₂O₂. The dynamics of algal biomass, nutrients, microcystins, phytoplankton, and zooplankton were measured within 7 d. The results showed that 5 mg/L H₂O₂ effectively eliminated algal biomass (measured as chlorophyll a and phycocyanin) and inhibited 50% of the photosynthetic activity of the cyanobacteria at 7 d in the low algal cell density group, while the same inhibition rate was observed in the high algal cell density group when the H₂O₂ was 20 mg/L. However, using a high dosage of H₂O₂, such as 10 mg/L, to suppress cyanobacteria with high biomass could result in a dramatic increase in nutrients and microcystins in the water column. The portion of eukaryotic algae, such as Chlorophyta, Bacillariophyta and Euglenophyta, in the phytoplankton community increased with increasing H₂O₂ concentrations; moreover, the dominant species of cyanobacteria changed from the nontoxic genus Dactylococcopsis to the toxic genus Oscillatoria, which may result in acute toxicity to zooplankton. Our results demonstrated that the application of H₂O₂ to control cyanobacterial blooms at the early stage when algal cell density was low posed less potential ecological risks and may have increased the diversity of the phytoplankton community.
اظهر المزيد [+] اقل [-]The effect of sewage sludge containing microplastics on growth and fruit development of tomato plants
2021
Hernández-Arenas, Ricardo | Beltrán-Sanahuja, Ana | Navarro-Quirant, Paula | Sanz-Lazaro, Carlos
Microplastics (MPs) are becoming an environmental growing concern, being the sewage sludge applied to agriculture fields one of the most important inputs to the environment. To date, there is no standardized protocol for their extraction and changes in vegetative growth and fruit maturation on cultivated plants induced by sludge containing MPs have not been studied yet. Sewage sludge from three different wastewater treatment plants located in Murcia, Spain, were studied. First, the microplastic concentration was estimated and, then, the effects of the sewage sludge in the development of tomato plants and fruit production was analyzed. The measured parameters in tomato plants were both, biomass and length, for shoot and root part, as well as, stem diameter and tomato production. The present work has developed and validated a protocol for the extraction and quantification of MPs comprising several shapes, materials and sizes from samples of sewage sludges, which offers a good compromise for the extraction of different types of microplastic. The protocol used for MPs extraction had a recovery efficiency of 80 ± 3% (mean ± SE) and used bicarbonate, to maximize MPs extraction. The mean abundance of MPs in the studied sewage sludge samples was 30,940 ± 8589 particles kg⁻¹ dry weight. Soils with sludge containing MPs fostered the growth of tomato plants, while delaying and diminished fruit production. However, other factors or their interactions with MPs could have influenced the outcomes. Further studies are necessary to corroborate these findings and explain the mechanisms of possible effects of MPs on plants.
اظهر المزيد [+] اقل [-]Powdered activated carbon (PAC) amendment enhances naphthalene biodegradation under strictly sulfate-reducing conditions
2021
Pagnozzi, Giovanna | Carroll, Sean | Reible, Danny D. | Millerick, Kayleigh
Capping represents an efficient and well-established practice to contain polycyclic aromatic hydrocarbons (PAHs) in sediments, reduce mobility, and minimize risks. Exposure to PAHs can encourage biodegradation, which can improve the performance of capping. This study investigates biodegradation of naphthalene (a model PAH) in highly reducing, sediment-like environments with amendment of different capping materials (PAC and sand). Microcosms were prepared with sediment enrichments, sulfate as an electron acceptor, and naphthalene. Results show that PAC stimulates naphthalene biodegradation and mineralization, as indicated by production of ¹⁴CO₂ from radiolabeled naphthalene. Mineralization in PAC systems correlates with the enrichment of genera (Geobacter and Desulfovirga) previously identified to biodegrade naphthalene (Spearman’s, p < 0.05). Naphthalene decay in sand and media-free systems was not linked to biodegradation activity (ANOVA, p > 0.05), and microbial communities were correlated to biomass yields rather than metabolites. Naphthalene decay in PAC systems consists of three stages with respect to time: latent (0–88 days), exponential decay (88–210 days), and inactive (210–480 days). This study shows that PAC amendment enhances naphthalene biodegradation under strictly sulfate-reducing conditions and provides a kinetic and metagenomic characterization of systems demonstrating naphthalene decay.
اظهر المزيد [+] اقل [-]Vertical profile of aerosols in the Himalayas revealed by lidar: New insights into their seasonal/diurnal patterns, sources, and transport
2021
Xiang, Yan | Zhang, Tianshu | Liu, Jianguo | Wan, Xin | Loewen, Mark | Chen, Xintong | Kang, Shichang | Fu, Yibin | Lv, Lihui | Liu, Wenqing | Cong, Zhiyuan
Atmospheric aerosols play a crucial role in climate change, especially in the Himalayas and Tibetan Plateau. Here, we present the seasonal and diurnal characteristics of aerosol vertical profiles measured using a Mie lidar, along with surface black carbon (BC) measurements, at Mt. Qomolangma (QOMS), in the central Himalayas, in 2018–2019. Lidar-retrieved profiles of aerosols showed a distinct seasonal pattern of aerosol loading (aerosol extinction coefficient, AEC), with a maximum in the pre-monsoon (19.8 ± 22.7 Mm⁻¹ of AEC) and minimum in the summer monsoon (7.0 ± 11.2 Mm⁻¹ of AEC) seasons. The diurnal variation characteristics of AEC and BC were quite different in the non-monsoon seasons with enriched aerosols being maintained from 00:00 to 10:00 in the pre-monsoon season. The major aerosol types at QOMS were identified as background, pollution, and dust aerosols, especially during the pre-monsoon season. The occurrence of pollution events influenced the vertical distribution, seasonal/diurnal patterns, and types of aerosols. Source contribution of BC based on the weather research and forecasting chemical model showed that approximately 64.2% ± 17.0% of BC at the QOMS originated from India and Nepal in South Asia during the non-monsoon seasons, whereas approximately 47.7% was from local emission sources in monsoon season. In particular, the high abundance of BC at the QOMS in the pre-monsoon season was attributed to biomass burning, whereas anthropogenic emissions were the likely sources during the other seasons. The maximum aerosol concentration appeared in the near-surface layer (approximately 4.3 km ASL), and high concentrations of transported aerosols were mainly found at 4.98, 4.58, 4.74, and 4.88 km ASL in the pre-monsoon, monsoon, post-monsoon, and winter seasons, respectively. The investigation of the vertical profiles of aerosols at the QOMS can help verify the representation of aerosols in the air quality model and satellite products and regulate the anthropogenic disturbance over the Tibetan Plateau.
اظهر المزيد [+] اقل [-]Biomass-burning emissions could significantly enhance the atmospheric oxidizing capacity in continental air pollution
2021
Zhu, Bo | Huang, Xiao Feng | Xia, Shi-Yong | Lin, Li-Liang | Cheng, Yong | He, Ling-Yan
Volatile organic compounds (VOCs) are important precursors of photochemical pollution. However, a substantial fraction of VOCs, namely, oxygenated VOCs (OVOCs), have not been sufficiently characterized to evaluate their sources in air pollution in China. In this study, a total of 119 VOCs, including 60 OVOCs in particular, were monitored to provide a more comprehensive picture based on different online measurement techniques, proton-transfer-reaction time-of-flight mass spectrometry (PTR-ToF-MS) and online gas chromatography/mass spectrometry (GC/MS), at a receptor site in southeastern China during a photochemically active period. Positive matrix factorization (PMF) and photochemical age-based parameterization were combined to identify and quantify different sources of major VOCs during daytime hours, with the advantage of including VOC decay processes. The results revealed the unexpected role of biomass burning (21%) in terms of ozone (O₃) formation potential (OFP) when including the contributions of OVOCs and large contributions (30–32%) of biomass burning to aldehydes, as more OVOCs were measured in this study. We argue that biomass burning could significantly enhance the continental atmospheric oxidizing capacity, in addition to the well-recognized contributions of primary pollutants, which should be seriously considered in photochemical models and air pollution control strategies.
اظهر المزيد [+] اقل [-]Effects of nitrogen-enriched biochar on rice growth and yield, iron dynamics, and soil carbon storage and emissions: A tool to improve sustainable rice cultivation
2021
Yin, Xiaolei | Peñuelas, Josep | Sardans, Jordi | Xu, Xuping | Chen, Youyang | Fang, Yunying | Wu, Liangquan | Singh, Bhupinder Pal | Tavakkoli, Ehsan | Wang, Weiqi
Biochar is often applied to paddy soils as a soil improver, as it retains nutrients and increases C sequestration; as such, it is a tool in the move towards C-neutral agriculture. Nitrogen (N) fertilizers have been excessively applied to rice paddies, particularly in small farms in China, because N is the major limiting factor for rice production. In paddy soils, dynamic changes in iron (Fe) continuously affect soil emissions of methane (CH₄) and carbon dioxide (CO₂); however, the links between Fe dynamics and greenhouse gas emissions, dissolved organic carbon (DOC), and rice yields following application of biochar remain unclear. The aims of this study were to examine the effects of two rates of nitrogen (N)-enriched biochar (4 and 8 t ha⁻¹ y⁻¹) on paddy soil C emissions and storage, rice yields, and Fe dynamics in subtropical early and late rice growing seasons. Field application of N-enriched biochar at 4 and 8 t ha⁻¹ increased C emissions in early and late rice, whereas application at 4 t ha⁻¹ significantly increased rice yields. The results of a culture experiment and a field experiment showed that the application of N-enriched biochar increased soil Fe²⁺concentration. There were positive correlations between Fe²⁺concentrations and soil CO₂, CH₄, and total C emissions, and with soil DOC concentrations. On the other way around, these correlations were negative for soil Fe³⁺concentrations. In the soil culture experiment, under the exclusion of plant growth, N-enriched biochar reduced cumulative soil emissions of CH₄ and CO₂. We conclude that moderate inputs of N-rich biochar (4 t ha⁻¹) increase rice crop yield and biomass, and soil DOC concentrations, while moderating soil cumulative C emissions, in part, by the impacts of biochar on soil Fe dynamics. We suggest that water management strategies, such as dry-wet cycles, should be employed in rice cultivation to increase Fe²⁺ oxidation for the inhibition of soil CH₄ and CO₂ production. Overall, we showed that application of 4 t ha⁻¹ of N-enriched biochar may represent a potential tool to improve sustainable food production and security, while minimizing negative environmental impacts.
اظهر المزيد [+] اقل [-]Field-based measurements of major air pollutant emissions from typical porcelain kiln in China
2021
Du, Wei | Wang, Jinze | Chen, Yuanchen | Zhuo, Shaojie | Wu, Shuiping | Liu, Weijian | Lin, Nan | Shen, Guofeng | Tao, Shu
China has been famous for its porcelains for millennia, and the combustion processes of porcelain production emit substantial amounts of air pollutants, which have not been well understood. This study provided firsthand data of air pollutant emissions from biomass porcelain kilns. The emission factor of PM₂.₅ was 0.95 ± 1.23 g/kg during the entire combustion cycle, lower than that of biomass burning in residential stoves and coal burning in brick kilns, attributed to the removal effects of the long-distance transport in dragon kilns. The temporal trend of particle pollutants, including particulate matters (PMs) and particulate polycyclic aromatic hydrocarbons (PAHs) (low at ignition phase and high at the end) again indicated the removal effects of the special structure, while gaseous pollutants, such as gaseous PAHs, exhibited the opposite result. The GWC₁₀₀ was estimated as 1.4 × 10⁶ and 0.5 × 10⁶ kg CO₂e/yr for the scenarios in which 50% and 100% of the wood was renewable, respectively. The GWC₁₀₀ of dragon kilns is nearly equal to that of 745 households using wood-fueled stoves. These results indicate the necessity of pollution controls for biomass porcelain kilns to estimate the emission inventory and climate change.
اظهر المزيد [+] اقل [-]Cascading effects of insecticides and road salt on wetland communities
2021
Lewis, Jacquelyn L. | Agostini, Gabriela | Jones, Devin K. | Relyea, Rick A.
Novel stressors introduced by human activities increasingly threaten freshwater ecosystems. The annual application of more than 2.3 billion kg of pesticide active ingredient and 22 billion kg of road salt has led to the contamination of temperate waterways. While pesticides and road salt are known to cause direct and indirect effects in aquatic communities, their possible interactive effects remain widely unknown. Using outdoor mesocosms, we created wetland communities consisting of zooplankton, phytoplankton, periphyton, and leopard frog (Rana pipiens) tadpoles. We evaluated the toxic effects of six broad-spectrum insecticides from three families (neonicotinoids: thiamethoxam, imidacloprid; organophosphates: chlorpyrifos, malathion; pyrethroids: cypermethrin, permethrin), as well as the potentially interactive effects of four of these insecticides with three concentrations of road salt (NaCl; 44, 160, 1600 Cl⁻ mg/L). Organophosphate exposure decreased zooplankton abundance, elevated phytoplankton biomass, and reduced tadpole mass whereas exposure to neonicotinoids and pyrethroids decreased zooplankton abundance but had no significant effect on phytoplankton abundance or tadpole mass. While organophosphates decreased zooplankton abundance at all salt concentrations, effects on phytoplankton abundance and tadpole mass were dependent upon salt concentration. In contrast, while pyrethroids had no effects in the absence of salt, they decreased zooplankton and phytoplankton density under increased salt concentrations. Our results highlight the importance of multiple-stressor research under natural conditions. As human activities continue to imperil freshwater systems, it is vital to move beyond single-stressor experiments that exclude potentially interactive effects of chemical contaminants.
اظهر المزيد [+] اقل [-]