خيارات البحث
النتائج 1 - 10 من 94
Geolocation of premises subject to radon risk: Methodological proposal and case study in Madrid
2019
Frutos, Borja | Martín-Consuegra, Fernando | Alonso, Carmen | de Frutos, Fernando | Sanchez, Virginia | García-Talavera, Marta
Useful information on the potential radon risk in existing buildings can be obtained by combining data from sources such as potential risk maps, the ‘Sistema de Información sobre Ocupación del Suelo de España’ (SIOSE) [information system on land occupancy in Spain], cadastral data on built property and population surveys. The present study proposes a method for identifying urban land, premises and individuals potentially subject to radon risk. The procedure draws from geographic information systems (GIS) pooled at the municipal scale and data on buildings possibly affected. The method quantifies the magnitude of the problem in the form of indicators on the buildings, number of premises and gross floor area that may be affected in each risk category. The findings are classified by type of use: residential, educational or office. That information may guide health/prevention policies by targeting areas to be measured based on risk category, or protection policies geared to the construction industry by estimating the number of buildings in need of treatment or remediation. Application of the methodology to Greater Madrid showed that 47% of the municipalities have houses located in high radon risk areas. Using cadastral data to zoom in on those at highest risk yielded information on the floor area of the vulnerable (basement, ground and first storey) premises, which could then be compared to the total. In small towns, the area affected differed only scantly from the total, given the substantial proportion of low-rise buildings in such municipalities.
اظهر المزيد [+] اقل [-]Analysis of the relationships between environmental noise and urban morphology
2018
Han, Xiaopeng | Huang, Xin | Liang, Hong | Ma, Song | Gong, Jianya
Understanding the effects of urban morphology on urban environmental noise (UEN) at a regional scale is crucial for creating a pleasant urban acoustic environment. This study seeks to investigate how the urban morphology influences the UEN in the Shenzhen metropolitan region of China, by employing remote sensing and geographic information data. The UEN in this study consists of not only regional environmental noise (RN), but also traffic noise (TN). The experimental results reveal the following findings: 1) RN is positively correlated with the nighttime light intensity (NTL) and land surface temperature (LST) (p < 0.05). More interestingly, landscape composition and configuration can also significantly affect RN. For instance, urban vegetation can mitigate the RN (r = −0.411, p < 0.01). There is a reduced RN effect when fewer buildings exist in an urban landscape, in terms of the positive relationship between building density and RN (r = 0.188, p < 0.01). Given the same percentage of building area, buildings are more effective at reducing noise when they are distributed across the urban scenes, rather than being spatially concentrated (r = −0.205, p < 0.01). 2) TN positively relates to large (r = 0.520, p < 0.01) and small–medium (r = 0.508, p < 0.01) vehicle flow. In addition, vegetation along or near roads can alleviate the TN effect (r = −0.342, p < 0.01). TN can also become more severe in urban landscapes where there is higher road density (r = 0.307, p < 0.01). 3) Concerning the urban functional zones, traffic land is the greatest contributor to urban RN, followed by mixed residential and commercial land. The findings revealed by this research will indicate how to mitigate UEN.
اظهر المزيد [+] اقل [-]Air quality considerations for stormwater green street design
2017
Shaneyfelt, Kathryn M. | Anderson, Andrew R. | Kumar, Prashant | Hunt, W. F. (William Frederick)
Green streets are increasingly being used as a stormwater management strategy to mitigate stormwater runoff at its source while providing other environmental and societal benefits, including connecting pedestrians to the street. Simultaneously, human exposure to particulate matter from urban transportation is of major concern worldwide due to the proximity of pedestrians, drivers, and cyclists to the emission sources. Vegetation used for stormwater treatment can help designers limit the exposure of people to air pollutants. This goal can be achieved through the deliberate placement of green streets, along with strategic planting schemes that maximize pollutant dispersion. This communication presents general design considerations for green streets that combine stormwater management and air quality goals. There is currently limited guidance on designing green streets for air quality considerations; this is the first communication to offer suggestions and advice for the design of green stormwater streets in regards to their effects on air quality. Street characteristics including (1) the width to height ratio of the street to the buildings, (2) the type of trees and their location, and (3) any prevailing winds can have an impact on pollutant concentrations within the street and along sidewalks. Vegetation within stormwater control measures has the ability to reduce particulate matter concentrations; however, it must be carefully selected and placed within the green street to promote the dispersion of air flow.
اظهر المزيد [+] اقل [-]Microenvironmental air quality impact of a commercial-scale biomass heating system
2017
Tong, Zheming | Yang, Bo | Hopke, Philip K. | Zhang, K Max
Initiatives to displace petroleum and climate change mitigation have driven a recent increase in space heating with biomass combustion. However, there is ample evidence that biomass combustion emits significant quantities of health damaging pollutants. We investigated the near-source micro-environmental air quality impact of a biomass-fueled combined heat and power system equipped with an electrostatic precipitator (ESP) in Syracuse, NY. Two rooftop sampling stations with PM2.5 and CO2 analyzers were established in such that one could capture the plume while the other one served as the background for comparison depending on the wind direction. Four sonic anemometers were deployed around the stack to quantify spatially and temporally resolved local wind patterns. Fuel-based emission factors were derived based on near-source measurement. The Comprehensive Turbulent Aerosol Dynamics and Gas Chemistry (CTAG) model was then applied to simulate the spatial variations of primary PM2.5 without ESP. Our analysis shows that the absence of ESP could lead to an almost 7 times increase in near-source primary PM2.5 concentrations with a maximum concentration above 100 μg m−3 at the building rooftop. The above-ground “hotspots” would pose potential health risks to building occupants since particles could penetrate indoors via infiltration, natural ventilation, and fresh air intakes on the rooftop of multiple buildings. Our results demonstrated the importance of emission control for biomass combustion systems in urban area, and the need to take above-ground pollutant “hotspots” into account when permitting distributed generation. The effects of ambient wind speed and stack temperature, the suitability of airport meteorological data on micro-environmental air quality were explored, and the implications on mitigating near-source air pollution were discussed.
اظهر المزيد [+] اقل [-]Do outdoor environmental noise and atmospheric NO2 levels spatially overlap in urban areas?
2016
Tenailleau, Quentin M. | Bernard, Nadine | Pujol, Sophie | Parmentier, Anne-Laure | Boilleaut, Mathieu | Houot, Hélène | Joly, Daniel | Mauny, Frédéric
The urban environment holds numerous emission sources for air and noise pollution, creating optimum conditions for environmental multi-exposure situations. Evaluation of the joint-exposure levels is the main obstacle for multi-exposure studies and one of the biggest challenges of the next decade. The present study aims to describe the noise/NO2 multi-exposure situations in the urban environment by exploring the possible discordant and concordant situations of both exposures. Fine-scale diffusion models were developed in the European medium-sized city of Besançon (France), and a classification method was used to evaluate the multi-exposure situations in the façade perimeter of 10,825 buildings. Although correlated (Pearson's r = 0.64, p < 0.01), urban spatial distributions of the noise and NO2 around buildings do not overlap, and 30% of the buildings were considered to be discordant in terms of the noise and NO2 exposure levels. This discrepancy is spatially structured and associated with variables describing the building's environment. Our results support the presence of several co-existing, multi-exposure situations across the city impacted by both the urban morphology and the emission and diffusion/propagation phases of each pollutant. Identifying the mechanisms of discrepancy and convergence of multi-exposure situations could help improve the health risk assessment and public health.
اظهر المزيد [+] اقل [-]Urban vegetation for reducing heat related mortality
2014
Chen, Dong | Wang, Xiaoming | Thatcher, Marcus | Barnett, Guy | Kachenko, Anthony | Prince, Robert
The potential benefit of urban vegetation in reducing heat related mortality in the city of Melbourne, Australia is investigated using a two-scale modelling approach. A meso-scale urban climate model was used to quantify the effects of ten urban vegetation schemes on the current climate in 2009 and future climates in 2030 and 2050. The indoor thermal performance of five residential buildings was then simulated using a building simulation tool with the local meso-climates associated with various urban vegetation schemes. Simulation results suggest that average seasonal summer temperatures can be reduced in the range of around 0.5 and 2 °C if the city were replaced by vegetated suburbs and parklands, respectively. With the limited buildings and local meso-climates investigated in this study, around 5–28% and 37–99% reduction in heat related mortality rate have been estimated by doubling the city's vegetation coverage and transforming the city into parklands respectively.
اظهر المزيد [+] اقل [-]Source, concentration, and distribution of elemental mercury in the atmosphere in Toronto, Canada
2011
Cairns, Elaine | Tharumakulasingam, Kavitharan | Athar, Makshoof | Yousaf, Muhammad | Cheng, Irene | Huang, Y. | Lu, Julia | Yap, Dave
Atmospheric gaseous elemental mercury [GEM] at 1.8, 4, and 59 m above ground, in parking lots, and in indoor and outdoor air was measured in Toronto City, Canada from May 2008–July 2009. The average GEM value at 1.8 m was 1.89 ± 0.62 ng m⁻³. The GEM values increased with elevation. The average GEM in underground parking lots ranged from 1.37 to 7.86 ng m⁻³ and was higher than those observed from the surface parking lots. The GEM in the indoor air ranged from 1.21 to 28.50 ng m⁻³, was higher in the laboratories than in the offices, and was much higher than that in the outdoor air. All these indicate that buildings serve as sources of mercury to the urban atmosphere. More studies are needed to estimate the contribution of urban areas to the atmospheric mercury budget and the impact of indoor air on outdoor air quality and human health.
اظهر المزيد [+] اقل [-]Characterizing spatiotemporal dynamics of anthropogenic heat fluxes: A 20-year case study in Beijing–Tianjin–Hebei region in China
2019
Chen, Shanshan | Hu, Deyong | Wong, Ernest Man-Sing | Ren, Huazhong | Cao, Shisong | Yu, Chen | Ho, Hung Chak
Rapid urbanization, which is closely related to economic growth, human health, and micro-climate, has resulted in a considerable amount of anthropogenic heat emissions. The lack of estimation data on long-term anthropogenic heat emissions is a great concern in climate and urban flux research. This study estimated the annual average anthropogenic heat fluxes (AHFs) in Beijing–Tianjin–Hebei region in China between 1995 and 2015 on the basis of multisource remote sensing images and ancillary data. Anthropogenic heat emissions from different sources (e.g., industries, buildings, transportation, and human metabolism) were also estimated to analyze the composition of AHFs. The spatiotemporal dynamics of long-term AHFs with high spatial resolution (500 m) were estimated by using a refined AHF model and then analyzed using trend and standard deviation ellipse analyses. Results showed that values in the region increased significantly from 0.15 W· m−2 in 1995 to 1.46 W· m−2 in 2015. Heat emissions from industries, transportation, buildings, and human metabolism accounted for 64.1%, 17.0%, 15.5%, and 3.4% of the total anthropogenic heat emissions, respectively. Industrial energy consumption was the dominant contributor to the anthropogenic heat emissions in the region. During this period, industrial heat emissions presented an unstable variation but showed a growing trend overall. Heat emissions from buildings increased steadily. Spatial distribution was extended with an increasing tendency of the difference between the maximum and the minimum and was generally dominated by the northeast–southwest directional pattern. The spatiotemporal distribution patterns and trends of AHFs could provide vital support on management decision in city planning and environmental monitoring.
اظهر المزيد [+] اقل [-]Occurrence and human exposure to brominated and organophosphorus flame retardants via indoor dust in a Brazilian city
2018
Cristale, Joyce | Aragão Belé, Tiago Gomes | Lacorte, Silvia | Rodrigues de Marchi, Mary Rosa
Indoor dust is considered an important human exposure route to flame retardants (FRs), which has arised concern due the toxic properties of some of these substances. In this study, ten organophosphorus flame retardants (OPFRs), eight polybrominated diphenyl ethers (PBDEs) and four new brominated flame retardants (NBFRs) were determined in indoor dust from different places in Araraquara-SP (Brazil). The sampled places included houses, apartments, offices, primary schools and cars. The analysis of the sample extracts was performed by gas chromatography coupled to mass spectrometry and two ionization techniques were used (electron ionization – EI; electron capture negative ionization – ECNI). OPFRs were the most abundant compounds and tris(2-butoxyethyl) phosphate (TBOEP), tris(phenyl) phosphate (TPHP), tris(1,3-dichloroisopropyl) phosphate (TDCIPP) and tris(2-chloroisopropyl) phosphate (TCIPP) were present at the highest concentrations. Among the brominated FRs, the most ubiquitous compounds were BDE-209, bis(2-ethylhexyl) tetrabromophthalate (BEH-TEBP) and decabromodiphenyl ethane (DBDPE). Statistical analysis revealed that there were differences among dust typologies for TBOEP, TDCIPP, ethylhexyl diphenyl phosphate (EHDPHP), BDE-209, 2-ethylhexyl 2,3,4,5-tetrabromobenzoate (EH-TBB), BEH-TEBP and DBDPE, which were attributed to different construction materials in each particular environment and to the age of the buildings. The highest levels of brominated FRs were observed in offices, TBOEP was at high concentration in primary schools, and TDCIPP was at high concentration in cars. A preliminary risk assessment revealed that toddlers were exposed to TBOEP levels higher than the reference dose when considering the worst case scenario. The results obtained in this study showed for the first time that although Brazil does not regulate the use of FRs, these substances are present in indoor dust at levels similar to the observed in countries that have strict fire safety standards, and that humans are exposed to complex mixtures of these contaminants via indoor dust.
اظهر المزيد [+] اقل [-]How tall buildings affect turbulent air flows and dispersion of pollution within a neighbourhood
2018
Aristodemou, Elsa | Boganegra, Luz Maria | Mottet, Laetitia | Pavlidis, Dimitrios | Constantinou, Achilleas | Pain, Christopher | Robins, Alan | ApSimon, H. M. (Helen M.)
The city of London, UK, has seen in recent years an increase in the number of high-rise/multi-storey buildings (“skyscrapers”) with roof heights reaching 150 m and more, with the Shard being a prime example with a height of ∼310 m. This changing cityscape together with recent plans of local authorities of introducing Combined Heat and Power Plant (CHP) led to a detailed study in which CFD and wind tunnel studies were carried out to assess the effect of such high-rise buildings on the dispersion of air pollution in their vicinity. A new, open-source simulator, FLUIDITY, which incorporates the Large Eddy Simulation (LES) method, was implemented; the simulated results were subsequently validated against experimental measurements from the EnFlo wind tunnel. The novelty of the LES methodology within FLUIDITY is based on the combination of an adaptive, unstructured, mesh with an eddy-viscosity tensor (for the sub-grid scales) that is anisotropic. The simulated normalised mean concentrations results were compared to the corresponding wind tunnel measurements, showing for most detector locations good correlations, with differences ranging from 3% to 37%. The validation procedure was followed by the simulation of two further hypothetical scenarios, in which the heights of buildings surrounding the source building were increased. The results showed clearly how the high-rise buildings affected the surrounding air flows and dispersion patterns, with the generation of “dead-zones” and high-concentration “hotspots” in areas where these did not previously exist. The work clearly showed that complex CFD modelling can provide useful information to urban planners when changes to cityscapes are considered, so that design options can be tested against environmental quality criteria.
اظهر المزيد [+] اقل [-]