خيارات البحث
النتائج 1 - 3 من 3
Leaching of Alkali from Concrete in Contact with Waterways
2009
Setunge, Sujeeva | Nguyen, Natalie | Alexander, Brendan Lee | Dutton, Louise
Concrete is usually the preferred material for construction of structures in contact with water during their service life. Early age exposure to water is beneficial for curing of concrete structures. However, the pollution of water from freshly cast concrete in contact with water has not been investigated in detail. A significant increase in the alkalinity has recently been observed in a stream in contact with freshly installed concrete culverts. High alkalinity has caused distress to fresh water fish in the stream. A preliminary laboratory study was commenced to explore the effect of leaching of alkali into water from freshly placed concrete. Freshly cast concrete specimens were exposed to fresh water, covering a range of conditions observed in the field such as volume of concrete/volume of water, age of exposure and cement content. Analysis of the results indicated that early age contact with fresh concrete can lead to an increase in the pH levels of water up to 11, similar to the levels of pH observed in pore water inside freshly cast concrete. It was noted that until an age of 4 days from casting of concrete, the age of exposure does not significantly affect the changes in the peak pH levels of water. Continuous monitoring of water in contact with concrete also indicated that the pH levels diminish with time, which is attributed to the possible reaction of calcium hydroxide with atmospheric carbon. The paper will present the experimental study, the results, analysis and outcomes as well as planning of a more comprehensive study to observe possible ways of reducing the leaching of alkali from freshly placed concrete.
اظهر المزيد [+] اقل [-]Influence of thermally activated paper sludge on the behaviour of blended cements subjected to saline and non-saline environments
2009
García, Rosario | Rubio, Virginia | Vegas, Iñigo | Frías Rojas, Moisés
Background, aim and scope One of the problems to affect Portland cement matrices is low resistance to aggressive agents, due principally to the presence of a high content of portlandite in the hydrated cements. Pozzolanic materials have played an important role in the improving the durability of cement-based materials for decades. This work studies the behaviour of cement mortar matrices blended with 10% calcined paper sludge (source for metakaolinite) and exposed to different environmental conditions (saline and non-saline environments) after 6 and 12 months of exposure. Materials and methods Two cements were studied: an ordinary Portland cement (CEM 1, 42.5R), acting as reference cement, and a blended cement formulated by mixing 90% (by mass) of CEM 1, 42.5R with 10% (by mass) of paper sludge calcined at 700°C for 2 h. The specimens were exposed 1 year to saline and non-saline environments. All the mineralogy samples were studied through X-ray diffraction and scanning electron microscopy (SEM) equipped with an energy dispersive X-ray analyser. The in-depth study on ionic mobility was performed on samples subjected to natural exposure (coast and tableland) for 6 and 12 months. Results Portland cement was composed of quartz, calcite, calcium hydroxide and tobermorite gels. The pozzolanic cement (10% calcined paper sludge) is of the same composition but a high calcite concentration and barium carbonate. SEM analysis from coastline show deposits of variable composition. The deposits are identified on the surface of different mineral components. The minerals from tableland are much fractured, i.e. calcite and feldspars. Inside the fractures, the deposits and the ions are located and trapped superficially. Discussion SEM analysis of control cement Portland and 10% calcined paper sludge shows deposits on quartz and calcite with a very high concentration of Pb, Zn, Cl and barium sulphate. A very porous aspect is due to the presence of the different aggregate types. This porous configuration permits retention of the ion environment. The pozzolanic cement in environments subject to the saline mist favours the retention and transport of ions observed. Something similar also happens with the increase in exposure to outdoor weather. Non-saline samples show temperature changes (ice or thaw cycles). Barium retention is kept on the surface in fracture lines by the gelification processes. In general, it may be inferred that an increase in exposure time increases the diffusion of ions towards test piece interiors. The chemical composition profiles show that the ions present different penetration speeds. Conclusions The results indicate the better vulnerability of pozzolanic cements from calcined paper sludge in saline and non-saline environments. The cements with a 10% addition of calcined paper sludge favour retention and transport of ion has been observed. Recommendations and perspectives Today, projects are centred on a new recycling line for industrial waste of this kind, with special attention on its incorporation in cement manufacture as a pozzolanic material, setting the most appropriate activation conditions of the mineralogical compound in this waste (kaolinite and metakaolinite) and taking them as a starting point for this project. The use of pozzolanic cement with 10% addition of calcined paper sludge is a system which favours ionic retention.
اظهر المزيد [+] اقل [-]Adsorption of lambda-cyhalothrin and cypermethrin on two typical Chinese soils as affected by copper
2009
Liu, Jun | Lü, Xiaomeng | Xie, Jimin | Chu, Yafei | Sun, Cheng | Wang, Qian
Background, aim, and scope Pesticides and heavy metals pollution in soil environment has become a serious problem in many countries including China. Repeated applications of bordeaux mixture (a blend of copper sulfate and calcium hydroxide) and pyrethroid (Pys) insecticides have led to elevated copper (Cu) and Pys concentrations in vineyard surface soils. However, few studies focused on the interaction of Pys and heavy metals in the soil environment. Our previous studies had indicated the combined effect of cypermethrin (CPM) and Cu on soil catalase activity. Also, we had suggested that the addition of Cu could catalyze photo-degradation of CPM and lambda-cyhalothrin (λ-CHT) in aqueous solution and restrain their degradation in soil. To better understand the potential influence of Cu on the fate of Pys in the soil environment, the aim of the present work was to examine the effect of Cu on the adsorption of λ-CHT and CPM on two typical Chinese soils with different soil characteristics, which was one of the key processes controlling the fate of Pys, and to provide more information about the potential ecological risk of chemicals on the soil ecosystem. Fourier transform infrared and point charges analysis using the MOPAC program of the Gaussian system were also used to reveal the probable adsorption mechanism of λ-CHT and CPM on soils. Materials and methods Two vineyard soils with different properties were chosen as experimental samples. They were sampled from 0 to 10 cm, dried, and sieved to 2 mm. Each soil was spiked with copper sulfate solution to obtain the following total soil Cu concentrations: 100, 200, 400, 800, and 1,600 mg·kg⁻¹. The treated soils were incubated for 2 weeks and then dried at 20°C. For each soil sample and at each soil Cu concentration, the adsorption of λ-CHT and CPM was measured using a batch equilibrium method. The concentration of λ-CHT was determined by HPLC, and the amount of λ-CHT and CPM adsorbed by the soil sample at equilibrium was determined by the difference between the initial and equilibrium concentrations in solution corrected by the blank adsorption measurement. Results Without the addition of Cu, the adsorption of λ-CHT and CPM on Black soil is greater than that on Red soil, while the adsorption of λ-CHT on both soils is significantly stronger than that of CPM. As the soil Cu concentration increased from 19 (or 18; background) to 1,600 mg·kg⁻¹, the adsorption coefficient (K d) of λ-CHT decreased from 12.2 to 5.9 L·kg⁻¹ for Red soil, and from 26.1 to 16.8 L·kg⁻¹ for Black soil, whereas the CPM adsorption coefficient in both soils decreased nearly by 100% (K d decreased from 9.4 to 0.2 L·kg⁻¹ for Red soil and from 16.2 to 0.5 L·kg⁻¹ for Black soil). Discussion Pys adsorption is a surface phenomenon which depends on the surface area and the organic matter content. Thus, the Black soil, having higher organic matter and greater surface area than that of the Red soil, show greater adsorption affinity to λ-CHT and CPM. In our study, the different adsorption affinity of the two Pys was obtained, which was probably attributed to differences with respect to their physical-chemical properties. Further comparison upon the two Pys was conducted. The point charges of halogen atoms in the λ-CHT and CPM were calculated, the differences of which probably lead to the fact that λ-CHT has a stronger binding capacity to soils than CPM. Also, FTIR spectra show that competitive adsorption occurs between CPM and Cu for the same adsorption sites, which is responsible for the obtained suppression of CPM adsorption affected by Cu. Conclusions Lambda-cyhalothrin shows a significantly stronger adsorption than cypermethrin on both soils. This phenomenon may be due to several reasons: (1) λ-CHT has lower solubility and a higher octanol-water partition coefficient value than CPM; (2) λ-CHT consists of specific isomers, whereas CPM is mixtures of eight different isomers; (3) the chlorine and fluorine atoms in the λ-CHT have a negative point charge, whereas the chlorine atoms in the CPM have a positive point charge. As the soil Cu concentrations increased from 19 (or 18) mg·kg⁻¹ to 1,600 mg·kg⁻¹, the adsorption coefficient of λ-CHT and CPM decreased on both soils. This is mainly due to a competition between Cu and Pys for occupying the adsorption sites on soils. The information from this study have important implications for vineyard and orchard soils, which often contain elevated levels of Cu and Pys. These results are also useful in assessing the environmental fate and health effect of λ-CHT and CPM. Recommendations and perspectives It is important for environmental scientists and engineers to get a better understanding of soil-metal-organic contaminant interactions. However, pesticide adsorption involves complex processes, and shortcomings in understanding them still restrict the ability to predict the fate and behavior of pesticide. Therefore, considerable research should be carried out to understand the mechanism of interaction between Pys and heavy metal on soils clearly.
اظهر المزيد [+] اقل [-]