Straw-return methods that neither negatively impact yield nor bring environmental risk are ideal patterns. To attain this goal, it is necessary to conduct field observation to evaluate the environmental influence of different straw-return methods. Therefore, we conducted a 2-year field study in 2015–2017 to investigate the emissions of methane (CH₄) and nitrous oxide (N₂O) and the changes in topsoil (0–20 cm) organic carbon (SOC) density in a typical Chinese rice-wheat rotation in the Eastern China. These measurements allowed a complete greenhouse gas accounting (net GWP and GHGI) of five treatments including: FP (no straw, plus fertilizer), FS (wheat straw plus fertilizer), FB (straw-derived biochar plus fertilizer), FSDI (wheat straw with straw-decomposing microbial inoculants plus fertilizer) and CK (control: no straw, no fertilizer). Average annual SOC sequestration rates were estimated to be 0.20, 0.97, 1.97 and 1.87 t C ha⁻¹ yr⁻¹ (0–20 cm) for the FP, FS, FB and FSDI treatments respectively. Relative to the FP treatment, the FS and FSDI treatments increased CH₄ emissions by 12.4 and 17.9% respectively, but decreased N₂O emissions by 19.1 and 26.6%. Conversely, the FB treatment decreased CH₄ emission by 7.2% and increased N₂O emission by 10.9% compared to FP. FB increased grain yield, but FS and FSDI did not. Compared to the net GWP (11.6 t CO₂-eq ha⁻¹ yr⁻¹) and GHGI (1.20 kg CO₂-eq kg⁻¹ grain) of FP, the FS, FB and FSDI treatments reduced net GWP by 12.6, 59.9 and 34.6% and GHGI by 10.5, 65.8 and 37.7% respectively. In rice-wheat systems of eastern China, the environmentally beneficial effects of returning wheat straw can be greatly enhanced by application of straw-decomposing microbial inoculants or by applying straw-derived biochar.

Following formative work in the 1970s, disappearance in the 1980s, and reemergence in the 1990s, a chronological review shows that the past decade has witnessed increasing interest in the study of urban metabolism. The review finds that there are two related, non-conflicting, schools of urban metabolism: one following Odum describes metabolism in terms of energy equivalents; while the second more broadly expresses a city’s flows of water, materials and nutrients in terms of mass fluxes. Four example applications of urban metabolism studies are discussed: urban sustainability indicators; inputs to urban greenhouse gas emissions calculation; mathematical models of urban metabolism for policy analysis; and as a basis for sustainable urban design. Future directions include fuller integration of social, health and economic indicators into the urban metabolism framework, while tackling the great sustainability challenge of reconstructing cities.

Currently the land use and land use change (LULUC) emits 1.3 ± 0.5 Pg carbon (C) year⁻¹, equivalent to 8% of the global annual emissions. The objectives of this study were to quantify (1) the impact of LULUC on greenhouse gas (GHG) emissions in a subtropical region and (2) the role of conservation agriculture to mitigate GHG emissions promoting ecosystem services. We developed a detailed IPCC Tier 2 GHG inventory for the Campos Gerais region of southern Brazil that has large cropland area under long-term conservation agriculture with high crop yields. The inventory accounted for historical and current emissions from fossil fuel combustion, LULUC and other minor sources. We used Century model to simulate the adoption of conservation best management practices, to all croplands in the region from 2017 to 2117. Our results showed historical (1930–2017) GHG emissions of 412 Tg C, in which LULUC contributes 91% (376 ± 130 Tg C), the uncertainties ranged between 13 and 36%. Between 1930 and 1985 LULUC was a major source of GHG emission, however from 1985 to 2015 fossil fuel combustion became the primary source of GHG emission. Forestry sequestered 52 ± 24 Tg C in 0.6 Mha in a period of 47 years (1.8 Tg C Mha⁻¹ year⁻¹) and no-till sequestered 30.4 ± 24 Tg C in 2 Mha in a period of 32 years (0.5 Tg C Mha⁻¹ year⁻¹) being the principal GHG mitigating activities in the study area. The model predictions showed that best management practices have the potential to mitigate 13 years of regional emissions (330 Tg C in 100 years) or 105 years of agriculture, forestry and livestock emissions (40 Tg C in 100 years) making the agriculture sector a net carbon (C) sink and promoting ecosystem services.

Green areas cool the climate of a city, reduce the energy consumption caused by the urban heat island (UHI) effect, and bring along carbon savings. However, the calculation of carbon savings due to the cooling effect of green areas is still not well understood. We have used a Landsat Enhanced Thematic Mapper Plus (ETM+) image of Beijing, to identify the cooled areas, compute the possible energy used to maintain the temperature differences between cooled areas and their surrounding heated areas, and calculate the carbon savings owing to the avoidance of energy use. Results show that a total amount of 14315.37 tons carbon savings was achieved in the study area and the amount was related to the biomass, the size and the shape of green areas. These results demonstrate the importance of carbon savings resulting from green areas' cooling effect.

Although hybrid maize seed production is one of the most important agriculture systems worldwide, its greenhouse gas (GHG) emissions and potential mitigation measures have not been studied. In this study, we used life cycle assessment (LCA) to quantify the GHG emissions of 150 farmers run by 6 companies in an area of northwest China known for hybrid maize seed production. The results indicated that the average reactive nitrogen (Nr) losses and GHG emissions from hybrid maize seed production were 53 kg N ha⁻¹ and 8077 kg CO₂ eq ha⁻¹, respectively. Furthermore, the average nitrogen and carbon footprints of the process were 12.2 kg N Mg⁻¹ and 1495 kg CO₂ eq Mg⁻¹, respectively. Nitrogen fertilizer and electricity consumption for irrigation were the main contributors to high GHG emissions, accounting for 60% and 30% of the total, respectively. The GHG emissions from seed production for different companies varied greatly with their resource input. There was also a large variation in environmental burdens among the 150 farmers. Based on an analysis of the yield group, we found that the carbon footprint of the first group (the one with the highest yield) was 27% lower than the overall average. Scenario analysis suggests that a combined reduction of N input rate, optimizing irrigation, and increasing yield can eventually mitigate the carbon footprint of hybrid maize seed production by 37%. An integrated systematic approach (e.g., ISSM: integrated soil-crop system management) can reduce the GHG emissions involved in producing hybrid maize seeds. This study provides quantitative evidence and a potential strategy for GHG emissions reduction of hybrid maize seed production.

The traditional cementitious product is prone to suffer from a high degree of deterioration in the case of exposure to acid solutions because of the decomposition of the binder network. However, the degradation of concrete structures in service by mild concentrations of acid under conditions involving sewage, industrial waters, and acid rain is more common and results in a significant environmental problem. The utilization of alkali-activated materials has been seen to potentially offer an attractive option with regard to acceptable durability and a low carbon footprint. With the aid of visual observation, mass loss, compressive strength tests, X-ray diffraction, Fourier transform infrared spectroscopy, and field-emission scanning electron microscopy with energy-dispersive X-ray spectroscopy, the acid resistance of alkali-activated fly ash mortars in which the precursor was partially replaced (0–30% by mass proportion) with ordinary Portland cement (OPC) was evaluated after 180 days of exposure to mild-concentration sulfuric and acetic solutions (pH = 3). A conventional cement mortar (100% OPC) was used as a reference group. The results demonstrate that the addition of OPC into the alkali-activated system causes a significant increase in compressive strength (around 16.08–36.61%) while showing an opposite influence on durability after acid attack. Based on a linear mean value and nonlinear artificial neural network model simulation, the mass losses of the specimens were evaluated, and the alkali-activated pure-fly ash mortar demonstrated the lowest value (i.e., a maximum of 5.61%) together with the best behavior in the aspect of discreteness at 180 days. The results from microstructure analysis show that the coexistence of the N–A–S–H and C–S–H networks in the blend system occurred by both OPC hydration and FA. However, the formation of the gypsum deposition within the fly ash-OPC blend systems at sulfuric acid was found to impose internal disintegrating stresses, causing a significant area of delamination and cracks. In addition, alkali metal ion leaching, dealumination, as well as the disappearance of some crystalline phases occurred in specimens immersed in both types of acids.

The study examined the dynamic nexus between carbon footprints, nonrenewable energy and renewable energy consumption, financial development and economic growth, and combating climate change by using a dataset of selected 13 Asian emerging economies (Bangladesh, China, India, Indonesia, Iran, Malaysia, Nepal, Pakistan, Philippines, South Korea, Sri Lanka, Thailand, and Vietnam) from 1995 to 2020. This study empirical analysis uses the second generation of panel cointegration techniques to compensate for cross-sectional dependency and slope heterogeneity. The mean group, the common correlated effects mean group, and the augmented mean group are used to estimate the long-run equations. The findings suggest that economic growth and nonrenewable energy consumption exacerbate environmental degradation, but renewable energy consumption mitigates the total adverse effects on the environment over time. Additionally, economy-specific findings examine how the impact of nonrenewable energy and renewable energy consumption on the carbon footprint depends on energy consumption level. Furthermore, the Dumitrescu-Hurlin causality test reveals a statistically significant bidirectional correlation between financial development, carbon footprints, economic growth, and consumption of nonrenewable energy and renewable energy. Finally, the study says that Asian emerging economies should use more renewable energy and be more efficient in order to reduce their carbon footprints.

The quest for eco-sustainable binders like agro-wastes in concrete to reduce the carbon footprint caused by cement production has been ongoing among researchers recently. The application of agro-waste-based cementitious materials in binary concrete has been said to improve concrete performance lately. Coconut and groundnut shells are available in abundant quantities and disposed of as waste in many world regions. Therefore, the use of coconut shell ash (CSA) and groundnut shell ash (GSA) in a ternary blend provides synergistic benefits with Portland cement (PC) and may be sustainably utilized in concrete as ternary cementitious material (TCM). Therefore, this study presents concrete performance with CSA and GSA in a grade 30 ternary concrete. Two hundred ten numbers of standard concrete samples were cast for checking the fresh and mechanical properties of concrete at curing ages of 7, 28, and 90 days. After 28-day curing, the experimental results show an increment in compressive, tensile, and flexural strength by 11.62%, 8.39%, and 9.46% at 10% TCM cement replacement, respectively. The concrete density and permeability coefficient reduce as TCM’s content increases. The modulus of elasticity after 90 days improved with the addition of TCM. The concrete’s sustainability assessment indicated that the emitted carbon for concrete decreased by around 16% using 20% TCM in concrete. However, the workability of fresh concrete declines as TCM content increases.

Mountain wines produced in specific mountain areas and following singular practices have gained popularity over the last few decades. During this time, the environmental impacts associated with the food and beverage manufacturing sector have become a question of interest. However, the environmental impacts derived from the production of this peculiar wine have scarcely been studied until now. A mountain winery in north Spain has been analyzed as representative of PDO “Cangas” winemaking by means of life cycle assessment (LCA). High-quality inventory data for one year of operation was obtained directly from this facility and two steps have been considered, the vineyard and the winery phases. The main factors involved in grape cultivation and wine production were included. In common with standard winemaking processes, the use of fertilizers and the production of glass bottles were the principal hotspots in the grape cultivation and wine production phases, respectively. Additionally, in the winery here evaluated, waste management also contributed notably to several impacts, mainly due to the employment of traditional practices such as the incineration in situ of vineyard pruning wastes. The carbon footprint obtained for “Cangas” PDO wine was 2.35 kg of CO₂eq per 0.75-l bottle, a value within the range reported in the literature for different wines around the world (0.2–2.5 kg CO₂eq per bottle). A sensitivity analysis has shown that changes in vineyard productivity and the amount of fertilizers applied to the land would strongly affect the environmental performance of the wine manufacturing process. Some alternative scenarios have been proposed, modifying the management of pruning wastes in the vineyard and the packaging material in the winery. Results showed that environmental impacts associated with the production of this mountain wine could be notably reduced simply by reusing a percentage of the bottles and/or composting the organic wastes. Specifically, the carbon footprint would be 40% lower if these two improvements were implemented. Considering the lack of similar studies, further research on the production of mountain wines should be carried out in other regions to increase the knowledge about the environmental impacts associated with the manufacturing of this singular type of wine.

This study proposes water–carbon–ecological footprints to form footprint family indicators for identifying the ecological compensation and regional development equilibrium in the Triangle of Central China (TOCC). The occupation of natural capital stock and flow consumption can be illustrated using a three-dimensional ecological footprint model, and Gini coefficient is integrated into the evaluation framework for fairness measurement from various aspects. Quantificational ecological compensation standards can be given with considering indicators associated with ecological resource conversion efficiency and willingness to pay. Results reveal that ecological and carbon footprints in the TOCC demonstrate rising trends from 2000 to 2015, while its water footprint presents a fluctuating trend. The majority of average Gini coefficients exceed the threshold value of 0.4 under different footprints, thereby indicating poor overall fairness of regional development. Water footprint in Jingmen, Xiangtan, and Yichun show relatively higher compensation expenses, while Yichang, Zhuzhou, and Fuzhou exhibit higher received compensation values compared with other cities. Carbon footprint in Wuhan, Loudi, and Xinyu indicate high compensation expenses due to their overuse of biological resources. Maximum amounts of compensation expense appear in Nanchang and Wuhan from the perspective of ecological footprint. This study can provide a theoretical reference for sustainable development in the TOCC by performing a comparative analysis with Beijing–Tianjin–Hebei urban agglomeration and developed countries.