خيارات البحث
النتائج 1 - 9 من 9
Microplastics in fish meal: Contamination level analyzed by polymer type, including polyester (PET), polyolefins, and polystyrene
2021
Castelvetro, Valter | Corti, Andrea | Bianchi, Sabrina | Giacomelli, Giacomo | Manariti, Antonella | Vinciguerra, Virginia
Fish meal (FM) is an industrial product, mainly obtained from whole wild-caught fish, that is used as a high protein feedstuff component in aquaculture and intensive animal farming. Contamination of FM by microplastics (MPs), the synthetic polymer particles known to be nearly ubiquitous in the marine environment, is a likely consequence of their ingestion by zooplankton and other small marine animals that through the food chain end up in the fish commercialized not only for direct human consumption but also for the industrial production of FM. Unfortunately, analytical tools for quantifying contamination of FM by synthetic polymers are not available. A newly developed procedure described here allows quantification of the total amounts of polyolefins (including ethene and propene homo- and copolymers), polystyrene (PS), and poly(ethylene terephthalate) (PET), respectively, in FM. The multi-step procedure involves a sequence of solvent extractions, hydrolytic treatments to remove the biogenic matrix mainly consisting of proteins and some lipids, and selective depolymerization for PET. The gravimetric and SEC-UV techniques employed for the quantification of polyolefins and PS, respectively, only allowed to estimate their concentration in FM at around or below 100 mg/kg each, a more accurate quantification being prevented by the interference from the organic matrix and, in the case of polyolefins, by the limited sensitivity of the quantification by gravimetry. On the other hand, the contamination by PET MPs could accurately be quantified at 12.9 mg/kg based on the dry FM mass. Ways to overcome the sensitivity limitations for PS and polyolefins by using e.g. pyrolysis-GC/MS are highlighted.
اظهر المزيد [+] اقل [-]Biodegradation of low-density polyethylene and polystyrene in superworms, larvae of Zophobas atratus (Coleoptera: Tenebrionidae): Broad and limited extent depolymerization
2020
Peng, Bo-Yu | Li, Yiran | Fan, Rui | Chen, Zhibin | Chen, Jiabin | Brandon, Anja M. | Criddle, Craig S. | Zhang, Yalei | Wu, Weimin
Larvae of Zophobas atratus (synonym as Z. morio, or Z. rugipes Kirsch, Coleoptera: Tenebrionidae) are capable of eating foams of expanded polystyrene (EPS) and low-density polyethylene (LDPE), similar to larvae of Tenebrio molitor. We evaluated biodegradation of EPS and LDPE in the larvae from Guangzhou, China (strain G) and Marion, Illinois, U.S. (strain M) at 25 °C. Within 33 days, strain G larvae ingested respective LDPE and PS foams as their sole diet with respective consumption rates of 58.7 ± 1.8 mg and 61.5 ± 1.6 mg 100 larvae⁻¹d⁻¹. Meanwhile, strain M required co-diet (bran or cabbage) with respective consumption rates of 57.1 ± 2.5 mg and 30.3 ± 7.7 mg 100 larvae⁻¹ d⁻¹. Fourier transform infrared spectroscopy, proton nuclear magnetic resonance, and thermal gravimetric analyses indicated oxidation and biodegradation of LDPE and EPS in the two strains. Gel permeation chromatography analysis revealed that strain G performed broad depolymerization of EPS, i.e., both weight-average molecular weight (Mw) and number-average molecular weight (Mₙ) of residual polymers decreased, while strain M performed limited extent depolymerization, i.e., Mw and Mₙ increased. However, both strains performed limited extent depolymerization of LDPE. After feeding antibiotic gentamicin, gut microbes were suppressed, and Mw and Mₙ of residual LDPE and EPS in frass were basically unchanged, implying a dependence on gut microbes for depolymerization/biodegradation. Our discoveries indicate that gut microbe-dependent LDPE and EPS biodegradation is present within Z. atratus in Tenebrionidae, but that the limited extent depolymerization pattern resulted in undigested polymers with high molecular weights in egested frass.
اظهر المزيد [+] اقل [-]Improved catalytic depolymerization of lignin waste using carbohydrate derivatives
2021
Gu, Sangseo | Choi, Jae-Wook | Lee, Hyunjoo | Suh, Dong Jin | Choi, Jungkyu | Ha, Jeong-Myeong
or sugar-derived compounds were used as environmentally friendly additives for the depolymerization of Kraft lignin waste and organosolv lignin prepared from Miscanthus giganteus. The yields of the aromatic monomers obtained from Kraft lignin increased from 5.1 to 49.2% with the addition of mannitol, while those obtained from organosolv lignin increased from 44.4 to 83.0% with the addition of sucrose. This improved lignin depolymerization was also confirmed by gel permeation chromatography and nuclear magnetic resonance spectroscopy. The above results clearly indicate the beneficial effects of carbohydrate derivatives on the lignin depolymersization process, more specifically, suggesting that the presence of carbohydrates improve the lignin depolymerization of lignocellulose, as observed for the raw lignocellulose feed.
اظهر المزيد [+] اقل [-]Metal/metalloid elements and polycyclic aromatic hydrocarbon in various biochars: The effect of feedstock, temperature, minerals, and properties
2015
Qiu, Mengyi | Sun, Ke | Jin, Jie | Han, Lanfang | Sun, Haoran | Zhao, Ye | Xia, Xinghui | Wu, Fengchang | Xing, Baoshan
Fourteen metal/metalloid elements and sixteen polycyclic aromatic hydrocarbons (PAHs) within biochars were quantified to investigate how heat treatment temperatures (HTTs) and feedstocks affect their concentration and composition. Concentrations and composition of metals/metalloids were strongly dependent upon feedstocks rather than HTTs. HTTs significantly affected concentrations and composition of PAHs. The highest concentration of PAHs was observed for plant residue-derived biochars (PLABs) produced at 450 °C and the opposite result was for animal waste-derived bichars. High mineral content was responsible for depolymerization of organic matter (OM), which facilitated high production of PAHs. High HTTs pyrolysis or combustion PAHs (COMB) of PLABs possibly blocks their micropores derived from other components within OM and leads to a decline of CO2-surface areas (CO2-SAs). Concentration of ∑COMB or individual PAH was affected by biochar properties, including composition and contents of functional groups, ash content, and CO2-SAs. PLABs produced at 600 °C were recommended for low toxicity.
اظهر المزيد [+] اقل [-]Quantification of polyethylene terephthalate microplastics and nanoplastics in sands, indoor dust and sludge using a simplified in-matrix depolymerization method
2022
Tian, Lei | Skoczynska, Ewa | Siddhanti, Deepti | van Putten, Robert-Jan | Leslie, Heather A. | Gruter, Gert-Jan M.
An effective 3-step method for the quantification of mass of polyethylene terephthalate microplastics and nanoplastics (PET MNPs) in complex environmental matrices was developed based on a simplified in-matrix depolymerization. Liquid chromatography (LC) coupled with ultraviolet (UV) detection was used for detection and quantification. Recoveries for PET-spiked sand samples were 99 ± 2% (1 mg/L) and 93 ± 7% (30 mg/L). The limit of quantification (LOQ) for PET was 0.4 μg/g for sand, 1 mg/g for indoor dust and 0.2 μg/g for wet sludge. This method was applied to seven beach sand samples, 20 indoor dust samples and one sewage sludge sample. PET MNPs levels in sand samples were all below the limit of detection (LOD) of LC-UV (0.1 μg/g). The concentrations of PET MNPs in indoor dust samples ranged from 1.2 to 305 mg/g and the PET MNPs in liquid sludge was 1.5 mg/L.
اظهر المزيد [+] اقل [-]Production and characterization of Komagataeibacter xylinus SGP8 nanocellulose and its calcite based composite for removal of Cd ions
2021
Bhattacharya, Amrik | Sadaf, Ayesha | Dubey, Swati | Singh, Rajesh P. | Khare, Sunil Kumar
In the present study, fermentative production of bacterial nanocellulose (BNC) by using Komagataeibacter xylinus strain SGP8 and characterization of nanocellulose is presented. The bacterium was able to produce 1.82 g L⁻¹ of cellulose in the form of pellicle in standard Hestrin-Schramn (HS) medium. The morpho-structural characterization of the BNC using scanning electron microscopy (SEM) and X-ray diffraction (XRD) studies, respectively revealed nanofibrillar structure and high crystallinity index (~86%). The thermogravimetric analysis (TGA) showed the stability of BNC up to 280 °C, further rise in temperature to 350 °C results in depolymerization of the sample. In order to show the applicability of produced BNC, it was modified first using calcite (CaCO₃) and thereafter characterized using SEM, XRD, FTIR, and TGA studies. The BNC-CaCO₃ composites as a sorbent resulted in >99% removal of initial 10 mg L⁻¹ of Cd (II) at pH 5, 7 and 9 after 12 h of treatment. Moreover, the composite was also found to be competent in removing high concentrations of Cd (25 and 50 mg L⁻¹) from the solution (69–70%). Overall, the above results suggest that cellulose produced by K. xylinus strain SGP8 showed excellent material properties, and modified BNC (BNC-CaCO₃ composite) could effectively be used for remediation of toxic levels of Cd from the contaminated system.
اظهر المزيد [+] اقل [-]Decolorization and reusing of PET depolymerization waste liquid by electrochemical method with magnetic nanoelectrodes
2018
This work is aimed at electrochemical decolorization of real waste liquid which obtained in the PET depolymerization process. Firstly, PET fabrics were glycolysized by utilizing excess ethylene glycol (EG). Then, the glycolysis product was mixed with water and purified through repeated crystallization to get bis(2-hydroxyethyl) terephthalate (BHET) crystal. At last, the waste liquid of the depolymerization process was electrochemical decolorized by utilizing chitosan/Fe₃O₄ nanoparticles as the dispersed electrodes under a DC voltage. The UV-Vis absorptions at 338, 531, and 635 nm which were due to the dyes in the waste liquid decreased with the electrolysis time. In contrast, slight change of absorption of EG (at 322 nm) indicated that EG was not destroyed in the electrolytic process. The variation of color removal efficiency with dosage of chitosan/Fe₃O₄ nanoparticles, applied voltage, concentration of electrolyte, pH and electrolytic time were investigated. The max color removal efficiency was 87.24%. PET fabrics were depolymerized by using the decolorized waste liquid or mixture of decolorized waste liquid and EG (1:1 v/v), and the yields of BHET were 72.3% and 76.6%, respectively. The products were BHET without dyes which were confirmed by DSC and FTIR spectroscopy. Graphical abstract
اظهر المزيد [+] اقل [-]Bioconversion of lignin into bioplastics by Pandoraea sp. B-6: molecular mechanism
2019
Liu, Dan | Yan, Xu | Si, Mengying | Deng, Xinhui | Min, Xiaobo | Shi, Yan | Chai, Liyuan
Lignin is a byproduct in the pulp and paper industry and is considered as a promising alternative for the provision of energy and chemicals. Currently, the efficient valorization of lignin is a challenge owing to its polymeric structure complexity. Here, we present a platform for bio-converting Kraft lignin (KL), to polyhydroxyalkanoate (PHA) by Pandoraea sp. B-6 (hereafter B-6). Depolymerization of KL by B-6 was first confirmed, and > 40% KL was degraded by B-6 in the initial 4 days. Characterization of PHA showed that up to 24.7% of PHA accumulated in B-6 grown in 6-g/L KL mineral medium. The composition, structure, and thermal properties of the produced PHA were analyzed, revealing that 3-hydroxybutyrate was the only monomer and that PHA was comparable with the commercially available bioplastics. Moreover, the genomic analysis illustrated three core enzymatic systems for lignin depolymerization including laccases, peroxidases, and Fenton-reaction enzymes; five catabolic pathways for LDAC degradation and a gene cluster consisting of bktB, phaR, phaB, phaA, and phaC genes involved in PHA biosynthesis. Accordingly, a basic model for the process from lignin depolymerization to PHA production was constructed. Our findings provide a comprehensive perspective for lignin valorization and bio-material production from waste.
اظهر المزيد [+] اقل [-]Alternative methods for the pilot-scale production and characterization of chitosan nanoparticles
2021
Alves, Helton José | Gasparrini, Lázaro José | Silva, Felipe Eduardo Bueno | Caciano, Laressa | de Muniz, Graciela Ines Bolzon | Ballester, Eduardo Luis Cupertino | Cremonez, Paulo André | Arantes, Mabel Karina
This work describes the production/characterization of low molar mass chitosan nanoparticles derived from waste shrimp shells (SSC), as well as from a commercial chitosan (CC). The production of low molar mass nanochitosan employed thermal shock, alternating between 100 °C and ambient temperature, followed by grinding the dry material (SSC and CC) in a ball mill, producing around 500 g of nanochitosan per batch. A highlight of the methodology employed is that it enables nanochitosan to be obtained even from a low quality commercial raw material. All particles had diameters smaller than 223 nm, with an average diameter below 25 nm (determined by DLS), while reductions of molar mass were between 8.4-fold and 13.5-fold. The depolymerization process resulted in a reduction in crystallinity of 38.1 to 25.4% and 55.6 to 25.9% in the CC and SSC samples, respectively. The production of nanochitosans was also confirmed by TEM through the observation of crystalline domains with diameters between 5 and 10 nm. This work perfectly reproduces the results on bench scale from previous research. The simple and inexpensive processes enable easy scale-up, representing an important advance in the production chain of biopolymers. Graphical abstract
اظهر المزيد [+] اقل [-]