In order to evaluate the effect of mining activity on the environment of the Qhorveh mining area in the west of Iran, the geological, ecological and environmental data, related to social development and regional economic status, were used. The geological data included seven sub-indices, such as vegetation coverage, land utilization type, and fault activity; ecological data, with two sub-indices, such as degree of ecological environment recovery; and finally, environmental data, with three sub-indices, such as soil and dust pollutions. These were selected based on the literature and expert opinion which were utilized for environmental pollution and geo-ecological (EPGE) risk assessment of the study site. Remote sensing (RS) image, field sampling, digital elevation map, and data retrieved from different government agencies were used to generate layers for the sub-indices in the geographic information system (GIS) environment. In addition, the analytical hierarchy process (AHP) method was used to determine the weight of sub-indices. Five levels consisting of best, good, middle, poor and worst were used to describe the EPGE risk assessment of the Qhorveh mining area. Results showed that worst and poor levels of EPGE risk are in the east and northeast of the study area where the gold and pumice mines are located while best and good levels of EPGE risk are in its center where the stone mines are located. According to the results of this research, the EPGE risk assessment of the Qhorveh mining area is affected by the environmental pollution index with its highest weight (0.3908). It can be concluded that the integration of the RS, GIS and AHP methods proposed in this study improved the evaluation quality of EPGE risk assessment.

Like fishing, natural regime shifts and human-induced environmental changes are often equally important factors in driving fish stock declines. In the Northwestern Arabian Gulf, many fish stocks are declining, raising questions about the reduction in the flow of Tigris-Euphrates rivers. Here we investigate the relationship between Tigris-Euphrates river flow and the estimated recruitment patterns from assessment models. We found a positive correlation between the estimated finfish recruitment trends and the flow of Tigris-Euphrates rivers. Additionally, the assessment model showed remarkably weak compensation ratio, likely indicating a reduction in the productivity of nursery area of two finfish stocks but not in that of the crustacean stock. Our investigation would be very critical in providing guidelines to the government agencies in the Northwestern Arabian Gulf as well as countries of Tigris-Euphrates basins: to consider the impacts associated with reductions in Tigris-Euphrates river flows on the ecosystem services of the region.

European maritime companies have adopted programs to limit operational impacts on the environment. For maritime companies in North America, the Green Marine Environmental Program (GMEP) offers a framework to establish and reduce environmental footprints. Green Marine (GM) participants demonstrate annual improvements of specific environmental performance indicators (e.g., reductions in air pollution emissions) to maintain certification. Participants complete annual self-evaluations with results determining rankings for performance indicators on a 1-to-5 scale. Self-evaluations are independently verified every two years to ensure rigor and individual results are made publicly available annually to achieve transparency. GM benefits the marine industry across North America by encouraging sustainable development initiatives. GM's credibility is reflected through a diverse network of environmental groups and government agencies that endorse and help shape the program. Merits of this relatively new maritime certification (not previously described in the academic literature), are discussed.

Great Lakes states are increasingly faced with questions regarding how plastic debris is impacting marine and coastal ecosystems. This is especially evident along the southern beaches of Lake Erie, where high population and industrial development have contributed to the plastics problem. In Ohio, the most common items found are cigarettes and other smoking related materials, including plastic cigar tips. Given the growing awareness of the issue, and the impact of plastics on beaches throughout the Great Lakes, a focus group convened to investigate strategies to help address the problem. The group was comprised of individuals with practical knowledge of plastic cigar tip use and disposal issues, including representatives of government agencies, nongovernmental organizations, community groups, and local academic institutions. This report represents the exploratory results of the focus group, complete with information regarding the what, why, and how of plastic cigar tip debris in the region, guidance on the material and social barriers to sustaining desired behaviors (cessation of use by minors and/or proper disposal), strategies to overcome those barriers, and suggestions for management and policy actions moving forward. Group members suggest that a combination of education and government-supported financial incentives may be the most effective approach, with community-based positive messaging backed by local taxes on smoking items that have plastic tips and rebates or other rewards for properly disposing of debris.

The formation of acid mine drainage (AMD), a highly acidic and metal-rich solution, is the biggest environmental concern associated with coal and mineral mining. Once produced, AMD can severely impact the surrounding ecosystem due to its acidity, metal toxicity, sedimentation and other deleterious properties. Hence, implementations of effective post-mining management practices are necessary to control AMD pollution. Due to the existence of a number of federal and state regulations, it is necessary for private and government agencies to come up with various AMD treatment and/or control technologies. This review describes some of the widely used AMD remediation technologies in terms of their general working principles, advantages and shortcomings. AMD treatment technologies can be divided into two major categories, namely prevention and remediation. Prevention techniques mainly focus on inhibiting AMD formation reactions by controlling the source. Remediation techniques focus on the treatment of already produced AMD before their discharge into water bodies. Remediation technologies can be further divided into two broad categories: active and passive. Due to high cost and intensive labor requirements for maintenance of active treatment technologies, passive treatments are widely used all over the world. Besides the conventional passive treatment technologies such as constructed wetlands, anaerobic sulfate-reducing bioreactors, anoxic limestone drains, open limestone channels, limestone leach beds and slag leach beds, this paper also describes emerging passive treatment technologies such as phytoremediation. More intensive research is needed to develop an efficient and cost-effective AMD treatment technology, which can sustain persistent and long-term AMD load.

The aim of the present study was to evaluate the status of heavy metal contamination in the samples of soil, water, vegetables, and vital organs (liver and kidney) of predominant species of rat i.e. Bandicota bengalensis, collected from the vegetable fields near Buddha Nullah (a seasonal water stream highly contaminated with domestic and industrial waste), Ludhiana, Punjab, India. The samples of soil, water, and vegetables and rat species were collected from the three sites (villages), viz., site I (Baran Hara), site II (Balloke), and site III (Jassian) lying in the vicinity of Buddha Nullah (contaminated site) and one site at Punjab Agricultural University, Ludhiana, Punjab, India (reference site IV). The results of the present study revealed significantly higher (p < 0.05) concentration of Cd, Cr, Mn, Ni, Pb, and Zn in soil samples and significantly higher (p < 0.05) concentration of As, Cd, Cr, Mn, and Pb in water samples collected from at all the three sites near Buddha Nullah as compared to reference site IV. In comparison to permissible limits given by SEPA (2016). (Swedish Environmental Protection Agency: Methods for inventories of contaminated sites. ISSN: 0282–7298.) and WHO (2017). (Guidelines for drinking-water quality. Fourth edition Incorporating the first addendum. pp 1–631.). Guidelines for drinking-water quality. Fourth edition Incorporating the first addendum. pp 1–631.), the concentration of Cd was found to be beyond the permissible limits in soil samples and concentration of As, Cd, Cr, Zn, and Pb was observed to be beyond the permissible limits in water samples collected from sites I, II, and III near Buddha Nullah. Heavy metals were present at significant concentrations (p < 0.05) in the samples of eight different vegetables collected from sites I, II, and III as compared to reference site IV. Heavy metals viz. As, Cd, Mn, and Zn and Mn, Ni, and Zn were found to be significantly higher (p < 0.05) in liver and kidney, respectively of the predominant rats collected from vegetable fields of sites I, II, and III as compared reference site IV. Histopathological studies in liver tissue of rats collected from sites I, II, and III determined the infiltration of leucocytes, dilation in central vein, pyknotic cells, increased Kupffer cells, and dilated sinusoidal spaces whereas renal tissue confirmed the degeneration of glomerular tuft and renal tubules, pyknotic nuclei in the cytoplasm and cytoplasmic vacuolization. Site I was concluded to be the prominent heavy metal contaminated location as the concentration of heavy metals in soil, water, vegetables, and rat organs (liver and kidney) collected from site I was the highest in comparison to sites II, III, and reference site IV. The calculation of transfer factor (TF) revealed the transfer of heavy metals from soil to vegetables at the contaminated sites which further intensifies the severity of heavy metal toxicity. Therefore, the results necessitate to avoid the application of water from unspecified or polluted water bodies for irrigation in agricultural fields and the urgency to purify the polluted water bodies such as Buddha Nullah to reduce the potential ecological risk in the environments.

Sustainable agricultural technologies are of great significance in fully utilizing agricultural resources and promoting agricultural production. However, the adoption rates of these technologies are often characterized as low in rural areas in China. To figure out the potential salient determinants of rice farmers’ willingness to adopt sustainable agricultural technologies, this paper, by employing the multivariate probit model and ordered probit model, particularly and firstly explores the roles of observational learning and experience-based learning through communication from parents within the household on rice farmers’ willingness to adopt these technologies. Results show that there are strong complementarities and substitutabilities between sustainable agricultural technologies that rice farmers are willing to adopt, and that observational learning and experience-based learning through communication within the household do have pronounced effects on rice farmers’ willingness to adopt some sustainable agricultural technologies and on their intensive use intentions. Therefore, while formulating policies to improve the adoption rates and adoption intensity of these technologies, relevant government agencies should take the complementarities and substitutabilities between sustainable agricultural technologies as well as observational learning and experience-based learning through communication from parents into consideration.

The current study investigated the levels of some heavy metals [lead (Pb), arsenic (As), nickel (Ni), mercury (Hg), copper (Cu), cadmium (Cd), aluminum (Al), and chromium (Cr)] and polycyclic aromatic hydrocarbons (PAHs) in six brands of instant noodles (CFN, GFC, NGP, GAA, CUN, and FCS) commonly consumed in Port Harcourt, Nigeria. Risks of consumption of contaminated noodles were also assessed. Heavy metal content and PAHs were determined using flame atomic absorption spectrophotometer and gas chromatography, respectively. Concentrations of heavy metals as Pb, Ni, Cu, Al, and Cr were detected while As, Hg, and Cd were not detected in noodles. High average concentrations (mean ± SD mg/kg) of Pb were observed in brands CFN (3.163 ± 0.21) and GFC (1.022 ± 0.08) which were significantly higher (P ≤ 0.05) than in NGP (0.043 ± 0.15) and GAA (0.276 ± 0.18), although all were above WHO permissible limits (0.025 mg/kg). Target Hazard Quotient and Hazard Index for Pb were > 1 in brands CFN and GFC indicating unacceptable risk. Results of PAHs showed brands had total PAHs (mg/kg) in the order CFN > CUN > GAA > NGP > FCS > GFC. Although carcinogenic risks associated with these noodles are within permissible range, consumption of CFN and GFC could pose greater health risk to consumers. Long-term consumption of brands CUN, CFN, and GAA may have higher probability of carcinogenesis among consumers. We therefore recommend more diligent regulatory policies and monitoring by relevant government agencies (WHO, NAFDAC, CPC, and SON) to ensure wholesome noodles get to consumers.

Field monitoring was conducted to develop a polycyclic aromatic hydrocarbon (PAH) emission inventory for the magnesium (Mg) metallurgy industry in China. PAH emissions in stack gas and fly/bottom ash samples from different smelting units of a typical Mg smelter were measured and compared. Large variations of concentrations, congener patterns, and emission factors of PAHs during the oxidation and reduction stages in the Mg smelter were observed. The measured average emission factor (166,487 μg/t Mg) was significantly higher than those of other industrial sources. Annual emission from Mg metallurgy in 2012 in China was estimated at 116 kg (514 g BaPeq) for PAHs. The results of this study suggest that PAH emission from Mg industries should be considered by local government agencies. These data may be helpful for understanding PAH levels produced by the Mg industry and in developing a PAH inventory.

The objective of the study is to examine the long-run and causal relationship between climate change (i.e., greenhouse gas emissions, hydrofluorocarbons, per fluorocarbons, and sulfur hexafluoride), air pollution (i.e., methane emissions, nitrous oxide emissions, and carbon dioxide emissions), and tourism development indicators (i.e., international tourism receipts, international tourism expenditures, natural resource depletion, and net forest depletion) in the World’s largest regions. The aggregate data is used for robust analysis in the South Asia, the Middle East and North Africa, sub-Saharan Africa, and East Asia and the Pacific regions, over a period of 1975–2012. The results show that climatic factors and air pollution have a negative impact on tourism indicators in the form of deforestation and natural resource depletion. The impact is evident, as we have seen the systematic eroding of tourism industry, due to severe changes in climate and increasing strain of air pollution. There are several channels of cause–effect relationship between the climatic factors, air pollution, and tourism indicators in the World’s region. The study confirms the unidirectional, bidirectional, and causality independent relationship between climatic factors, air pollution, and tourism indicators in the World. It is conclusive that tourism industry is facing all time bigger challenges of reduce investment, less resources, and minor importance from the government agencies because of the two broad challenges, i.e., climate change and air pollution, putting them in a dismal state.