In the current investigation, we presented the success of the modified hydrothermal method for synthesizing the iron-oxide nanoparticles (Fe₂O₃-NPs) efficiently. These NPs were further characterized by using different techniques such as X-ray diffraction (XRD), scanning electron microscope (SEM) micrographs, energy-dispersive X-ray spectroscopy (EDAX)/Mapping pattern, Raman Spectroscopy Pattern, ultra violet (UV) and Photoluminescence (PL). All these analyses revealed highly pure nature of Fe₂O₃-NPs with no internal defects, and suggested its application for plant growth improvement. Therefore, we further investigated the separate as well as combined effects of the Fe₂O₃-NPs and citric acid (CA) in the alleviation of arsenic (As) toxicity in the soybean (Glycine max L.), by evaluating the different plant growth and metabolic attributes. Results of our study revealed that As-induced growth inhibition, reduction of photosynthesis, water use efficiency (WUE), and reactive oxygen species (ROS) accumulation whereas application of the Fe₂O₃-NPs and CA significantly reversed all these adverse effects in soybean plants. Moreover, the As-stress induced malondialdehyde (MDA) and hydrogen peroxide (H₂O₂) production were partially reversed by the Fe₂O₃-NPs and CA in the As-stressed plants by 16% and 10% (MDA) and 29% and 12% (H₂O₂). This might have resulted due to the Fe₂O₃-NPs and CA induced activities of the antioxidant defense in plants. Overall, the Fe₂O₃-NPs and CA supplementation separately and in combination positively regulated the As tolerance in soybean; however, the effect of the combined application on the As tolerance was more profound relative to the individual application. These results suggested the synergetic effect of the Fe₂O₃-NPs and CA on the As-tolerance in soybean. However, in-depth mechanism underlying the defense crosstalk between the Fe₂O₃-NPs and CA needs to be further explored.

Since lead, cadmium and arsenic have completely opposite chemical behaviors, it is very difficult to stabilize all these three heavy metals simultaneously. Herein, a novel iron-doped hydroxyapatite composite (Fe-HAP) was developed via an ultrasonic-assisted microwave hydrothermal method for the simultaneous remediation of lead-, cadmium-, and arsenic-co-contaminated soil in Hunan Province, South China. Using DTPA/sodium bicarbonate extractant to extract bioavailable Pb, Cd and As in soil after Fe-HAP remediation for 60 days, the immobilization efficiencies were 79.77%, 51.3% and 37.5% for Pb, Cd and As, respectively. The soil extractable and exchangeable fractions of Pb, Cd and As decreased significantly. In batch experiments, the adsorption kinetics of Pb, Cd and As on Fe-HAP were well described by pseudo-second-order models, indicating that the adsorption is controlled by chemisorption. In the Langmuir adsorption isotherm, the maximum adsorption capacities of Cd²⁺ and As(V) were 476.2 mg g⁻¹ and 195.69 mg g⁻¹, respectively, while Pb²⁺ fit the Freundlich model better. The XRD, SEM and XPS analyses indicated that Fe-HAP formed stable minerals of Pb₅(PO₄)₃OH, Cd₃(PO₄)₂·4H₂O, Cd(OH)₂ and Fe₃(AsO₄)₂·6H₂O with Pb, Cd and As. Overall, its facile and efficient immobilization performance indicate that Fe-HAP has potential for practical applications in integrative remediation of Pb-, Cd-, and As- co-contaminated soil.

Polycyclic aromatic hydrocarbons (PAHs) in soil can be recalcitrant to solvent extraction after aging. We showed in this study that mixing a small amount of water in the extracting solvent during microwave-assisted extraction (MAE) can release recalcitrant PAHs, resulting in significant improvement in the analyzed concentrations. The improvement factor (F) for the total of 16 priority PAHs (∑PAH16) listed by the United States Environmental Protection Agency was 1.44–1.55 for field soils. By comparing the F values for different soil organic components, we demonstrated that the recalcitrant PAHs were primarily associated with biochar, humic acid (HA), and humin (HM), with the F values for ∑PAH16 of 1.94, 6.62, and 4.59, respectively. The results showed that the recalcitrant PAHs comprised a sequestered fraction and a desorption-limited fraction. NMR spectra showed that water worked alone at elevated temperature to promote hydrolysis of biochar and destroy the macromolecular structure, thus causing the release of the otherwise sequestered PAHs during MAE. The substantial reduction in F values for HA and HM after demineralization indicated sequestration of PAHs in organic-mineral complexes, which can be destroyed by hot water treatment. The release of the sequestered fraction was nonselective and independent of compound hydrophobicity. In comparison, the release of the desorption-limited fraction was positively affected by the hydrophobicity of PAHs and was facilitated by the presence of water in the extracting solvent. The results of this study provide important insights into the sequestration and release of recalcitrant PAHs in soil.

Nitrocompounds are the major prime water contaminants. In this investigative study, toxic nitrocompounds (4-nitrophenol, 2,4-dinitrophenol, 2,4,6-trinitrophenol) were removed by using magnetic CuFe₂O₄, CoFe₂O₄, and NiFe₂O₄ material systems. The metal ferrites were synthesized through hydrothermal method and also followed with calcination process. The properties of metal ferrites were confirmed through using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and field emission scanning electron microscopy (FE-SEM) studies and results there on were presented. For the first time, the synthesized CuFe₂O₄, CoFe₂O₄, and NiFe₂O₄ material systems were used for the reduction of 4-nitrophenol (NP), 2,4-dinitrophenol (DNP), and 2,4,6-trinitrophenol (TNP) in aqueous medium. The UV–visible spectrometry was employed to monitor the removal of nitro compounds and formation of aminophenol. Among, the three catalysts, the CuFe₂O₄ displayed excellent removal activity for nitrocompounds. The CuFe₂O₄ nanoparticles completely removed the NP, DNP and TNP within 2, 5, 10 min, respectively. The NP reduction reaction follows the pseudo-first-order kinetics. Further, the investigated and proposed CuFe₂O₄, catalyst has given and demonstrated excellent kinetic rate constants 0.990, 0.317, 0.184 min⁻¹ for 4-NP, DNP and TNP respectively, which was very fast kinetic than the already published reports. Also, the aminophenol formation was confirmed for the above mentioned and select nitrocompounds. The obtained results confirm suggest that CuFe₂O₄ nanoparticles based material system could be one of the promising catalysts for nitro compounds removal process.

Industrial dye effluents, which are a major wastage component that enter the natural environment, pose a significant health risk to human and aquatic life. Therefore, the effective removal of dye effluents is a major concern. Against this backdrop, in this study, a low-cost, earth-abundant, and ecofriendly ɤ-Fe₂O₃–PPy nanocomposite was prepared employing the conventional hydrothermal method. The morphology, functional groups, and elemental composition of ɤ-Fe₂O₃–PPy were characterized by XRD, SEM, XPS, and FTIR studies. Under optimized conditions, the prepared novel ɤ-Fe₂O₃–PPy nanocomposite showed a high methylene blue (MB) adsorption capacity of 464 mg/g, which is significantly higher than that of existing adsorbents such as CNTs and polymer-modified CNTs. The adsorption parameters such as pH, adsorbent dosage, and ionic strength were optimized to enhance the MB adsorption capacity. The adsorption results revealed that MB is adsorbed onto the adsorbent surface via electrostatic interactions, hydrogen bonding, and chemical binding interactions. In terms of practical application, the adsorbent’s adsorption–desorption ability in conjunction with magnetic separation was investigated; the prepared ɤ-Fe₂O₃–PPy nanocomposite exhibited excellent adsorption and desorption efficiencies over more than seven adsorption–desorption cycles.

The performance of the cathode significantly affects the ability of the electro-Fenton (EF) process to degrade chemicals. In this study, a simple method to modify the graphite felt (GF) cathode was proposed, i.e. oxidizing GF by hydrothermal treatment in nitric acid. The surface physical and electrochemical properties of modified graphite felt were characterized by several techniques: scanning electron microscope (SEM), water contact angle, X-ray photoelectron spectroscopy (XPS), Raman spectroscopy and linear scanning voltammetry (LSV). Compared with an unmodified GF (GF-0), the oxygen reduction reaction (ORR) activity of a modified GF was significantly improved due to the introduction of more oxygen-containing functional groups (OGs). Furthermore, the results showed that GF was optimally modified after 9 h (GF-9) of treatment. As an example, the H₂O₂ generation by GF-9 was 2.26 times higher than that of GF-0. After optimizing the process parameters, which include the initial Fe²⁺ concentration and current density, the apparent degradation rate constant of levofloxacin (LEV) could reach as high as 0.40 min⁻¹. Moreover, the total organic carbon (TOC) removal rate and mineralization current efficiency (MCE) of the modified cathode were much higher than that of the GF-0. Conclusively, GF-9 is a promising cathode for the future development in organic pollutant removal via EF.

A series of phosphorus containing ZnO (P–ZnO) photocatalysts with various percentages of phosphorus were successfully synthesized using the hydrothermal method. The structural, physical and optical properties of the obtained microparticles were investigated using diverse techniques such as X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, ultraviolet–visible diffusion reflectance spectroscopy (UV–Vis DRS), photoluminescence (PL) spectroscopy, transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS) and N₂ adsorption-desorption analysis. The photocatalytic activities of the pure and P–ZnO samples were evaluated for the degradation of Rhodamine B (RhB) under visible light irradiation. The parameters such as pH, catalyst dosage, contaminant concentration and effect of persulfate as an oxidant were studied. It was found that the P–ZnO1.8% photocatalyst could destroy 99% of RhB (5 ppm) in 180 min at pH = 7; furthermore, it degraded ∼100% of 5 and 10 ppm of the RhB pollutant in 120 and 180 min, respectively, only by adding 0.01 g of persulfate into the reaction solution. To determine the photocatalytic mechanism, 2-propanol, benzoquinone and EDTA were used and it was indicated that hydroxyl radicals, superoxide ions and holes, all had major roles in the photocatalytic degradation but the hydroxyl radical effect was the most significant. The phenol degradation was also investigated using the P–ZnO1.8% optimum photocatalyst which could destroy 53% of the phenol (5 ppm) in 180 min. According to the reusability test, it was proved that after 5 cycles, the catalyst activity was not highly changed and it was potentially capable of pollutant degradation.

Lincomycin mycelial residues (LMRs) are one kind of byproduct of the pharmaceutical industry. Hydrothermal treatment has been used to dispose of them and land application is an attractive way to reuse the treated LMRs. However, the safe dose for soil amendment remains unclear. In this study, a lab-scale incubation experiment was conducted to investigate the influence of the amendment dosage on lincomycin resistance genes and soil bacterial communities via quantitative PCR and 16S rRNA sequencing. The results showed that introduced lincomycin degraded quickly in soil and became undetectable after 50 days. Degradation rate of the high amendment amount (100 mg kg−1) was almost 4 times faster than that of low amendment amount (10 mg kg−1). Moreover, the introduced LMRs induced the increase of lincomycin resistance genes after incubation for 8 days, and two genes (lmrA and lnuB) showed a dosage-related increase. For example, the abundance of gene lmrA was 17.78, 74.13 and 128.82 copies g−1 soil for lincomycin concentration of 10, 50 and 100 mg kg−1, respectively. However, the abundance of lincomycin resistance genes recovered to the control level as the incubation period extended to 50 days, indicating a low persistence in soil. In addition, LMRs application markedly shifted the bacterial composition and significant difference was found between control soil, 10 mg kg−1 and 50 mg kg−1 lincomycin amended soil. Actually, several genera bacteria were significantly related to the elevation of lincomycin resistance genes. These results provided a comprehensive understanding of the effects of lincomycin dosage on the fate of resistance genes and microbial communities in LMRs applied soil.

The cobalt ferrite-reduced oxidized graphene (CoFe2O4/rGO) catalyst was synthesized by hydrothermal method and characterized by Powder X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Scanning electron microscope (SEM), Brunauere Emmette Teller (BET) and Hysteresis loop. For developing a new method of removing elemental mercury (Hg0) from flue gas, the effects of catalyst dosage, PMS concentration, solution pH and reaction temperature on the removal efficiency were investigated experimentally by using peroxymonosulfate (PMS) catalyzed by CoFe2O4/rGO at a self-made bubbling reactor. The average removal efficiency of Hg0 in a 30-min period reached 95.56%, when CoFe2O4/rGO dosage was 0.288 g/L, PMS concentration was 3.5 mmol/L, solution pH was 5.5 and reaction temperature was 55 °C. Meanwhile, based on the free radical quenching experiments, in which, ethyl alcohol and tert butyl alcohol were used as quenchers to prove indirectly the presence of •OH and SO4•−, the characterizations of catalysts and reaction products, and the existing results from other scholars. The reaction mechanism was proposed.

As a useful heavy metal ion, chromium has seen its applications in various fields. While it is also a toxic contaminant in water and may cause serious threats to the environment and human health. To develop a novel material with good adsorption capacity and easy solid-liquid separation strategy was necessary and significant. In this paper, the β-cyclodextrin (β-CD) functionalized three-dimensional structured graphene foam (CDGF) was successfully synthesized with the facile and one-step hydrothermal method. The SEM, BET, XRD, FT-IR and XPS analysis were carried out and the results confirmed the successfully grafting of β-CD onto GF. The batch adsorption of Cr(VI) was also taken out and the CDGF possessed good selectivity compared with other metal ions at pH = 3. The adsorption capacity reduced gradually as the initial pH of the Cr(VI) solution grew higher, which was because the anionic species of Cr(VI) were partial to the positively charged surface of CDGF. The easy separation strategy of the CDGF was also demonstrated and the CDGF could be taken out easily with a tweezer after the adsorption of Cr(VI), which significantly simplified the separation procedure and reduced time. By comparing the FT-IR and XPD analysis results, the adsorption mechanism was explored and the hydroxyl groups on CDGF played the main role in the adsorption process. This work brings a novel material for the adsorption of Cr(VI) from water and provides an innovative direction for the easy and fast solid-liquid separation strategy in the adsorption and other application fields.