Extensive green-roof systems are expected to have a synergetic effect in mitigating urban runoff, decreasing temperature and supplying water to a building. Mitigation of runoff through rainwater retention requires the effective design of a green-roof catchment. This study identified how to improve building runoff mitigation through quantitative analysis of an extensive green-roof system. Quantitative analysis of green-roof runoff characteristics indicated that the extensive green roof has a high water-retaining capacity response to rainfall of less than 20 mm/h. As the rainfall intensity increased, the water-retaining capacity decreased. The catchment efficiency of an extensive green roof ranged from 0.44 to 0.52, indicating reduced runoff comparing with efficiency of 0.9 for a concrete roof. Therefore, extensive green roofs are an effective storm water best-management practice and the proposed parameters can be applied to an algorithm for rainwater-harvesting tank design.

Lead contamination of urban residential soils is a public health concern. Consequently, there is a need to delineate hotspots in the landscape to identify risk and facilitate remediation. Land use is a good predictor of some environmental pollutants. However, in the case of soil lead, research has shown that land use is not a useful proxy. We hypothesize that soil lead is related to both individual landscape features at the parcel scale and the landscape context in which parcels are embedded. We sampled soil lead on 61 residential parcels in Baltimore, Maryland using field-portable x-ray fluorescence. Thirty percent of parcels had average lead concentrations that exceeded the USEPA limit of 400 ppm and 53% had at least one reading that exceeded 400 ppm. Results indicate that soil lead is strongly associated with housing age, distance to roadways, and on a parcel scale, distance to built structures.

The concentration and composition of PAHs emitted from biomass cooking fuel were characterized in a rural non-smoking household in northern China. Twenty-two parent PAHs (pPAHs), 12 nitro-PAHs (nPAHs), and 4 oxy-PAHs (oPAHs) were measured in the kitchen, bedroom, and outdoors during both summer and winter. The most severe contamination occurred in the kitchen in the winter, where the daily mean concentrations of pPAHs, nPAHs, and oPAHs were 7500 ± 4100, 38 ± 29, and 8400 ± 9200 ng/m³, respectively. Our results suggest that the nPAHs were largely from secondary formation in ambient air while oPAHs were either from primary emission of biomass burning or secondary formation from pPAHs in the kitchen. The daily mean benzo(a)pyrene equivalent exposure concentration was as high as 200 ± 160 ng/m³ in the winter for the housewife who did the cooking compared to 59 ± 37 ng/m³ for the control group that did not cook.

The objective of this study was to assess the quality of harvested rainwater in the Mekong Delta (MD), Vietnam for local (roof types, storage system and duration) and spatial (proximity of industry, main roads, coastline) conditions. 78 harvested rainwater samples were collected in the MD and analyzed for pH, turbidity, TDS, COD, nutrients (NH4, NO3, NO2, o-PO4), trace metals and coliforms. The results show that thatch roofs lead to an increase of pollutants like COD (max 23.2 mgl−1) and turbidity (max 10.1 mgl−1) whereas galvanized roofs lead to an increase of Zn (max 2.2 mgl−1). The other local and spatial parameters had no or only minor influence on the quality of household harvested rainwater. However, lead (Pb) (max. 16.9 μgl−1) and total coliforms (max. 102 500 CFU100 ml−1) were recorded at high concentrations, probably due to a variety of household-specific conditions such as rainwater storage, collection and handling practices.

This study examines concentrations of volatile organic compounds (VOCs) measured inside and outside of 162 residences in southeast Michigan, U.S.A. Nested analyses apportioned four sources of variation: city, residence, season, and measurement uncertainty. Indoor measurements were dominated by seasonal and residence effects, accounting for 50 and 31%, respectively, of the total variance. Contributions from measurement uncertainty (<20%) and city effects (<10%) were small. For outdoor measurements, season, city and measurement variation accounted for 43, 29 and 27% of variance, respectively, while residence location had negligible impact (<2%). These results show that, to obtain representative estimates of indoor concentrations, measurements in multiple seasons are required. In contrast, outdoor VOC concentrations can use multi-seasonal measurements at centralized locations. Error models showed that uncertainties at low concentrations might obscure effects of other factors. Variance component analyses can be used to interpret existing measurements, design effective exposure studies, and determine whether the instrumentation and protocols are satisfactory.

Traditionally, life cycle assessment (LCA) does not estimate a key property: surface albedo. Here an enhancement of the LCA methodology has been proposed through the development and employment of a time-dependent climatological model for including the effect of surface albedo on climate. The theoretical findings derived by the time-dependent model have been applied to the case study of a black and a white roof evaluated in the time-frames of 50 and 100 years focusing on the impact on global warming potential. The comparative life cycle impact assessment of the two roofs shows that the high surface albedo plays a crucial role in offsetting radiative forcings. In the 50-year time horizon, surface albedo is responsible for a decrease in CO₂eq of 110–184 kg and 131–217 kg in 100 years. Furthermore, the white roof compared to the black roof, due to the high albedo, decreases the annual energy use of about 3.6–4.5 kWh/m².

The main GHGs (CO2, NOx, and SO2) have been quantified based on national energy and population statistics. The results show that the contribution of households' energy consumption in the West Bank to global CO2 emission is about 0.016%, while contribution of total energy consumption by all sectors is about 0.041%. The results show that wood is the most polluting energy source in terms of CO2 and NOx emission, while electricity is the most polluting source in terms of SO2. Other sources like diesel, kerosene, and LPG that contribute to the GHGs emission are also quantified. The total amounts of CO2, NOx, and SO2 by households in the West Bank are 4.7 million tonne per year, 3.02 thousand tonne per year, and 2.23 thousand tonne per year respectively. This study presents a set of measures that might help in reducing the level of GHGs emission and protect the environment.

Studies have shown that socioeconomic and environmental factors have direct/indirect influences on TB. This research focuses on TB prevalence of Hong Kong in relation to its compact urban development comprising of high-rise and high-density residential dwellings caused by rapid population growth and limited land resources. It has been postulated that occupants living on higher levels of a building would benefit from better ventilation and direct sunlight and thus less likely to contract infectious respiratory diseases. On the contrary, those on lower floors amid the dense clusters of high-rises are more susceptible to TB infection because of poorer air quality from street-level pollution and lesser exposure to direct sunlight. However, there have not been published studies to support these claims. As TB continues to threaten public health in Hong Kong, this study seeks to understand the effects of housing development on TB occurrences in an urban setting.

Our knowledge of the concentrations of bioaerosols in residential micro-environments in low income countries is scanty. The present investigation was conducted to assess the culturable concentration and size distribution of bacteria, gram negative bacteria and fungi in two rural and an urban site in Pakistan. The highest indoor culturable bacteria concentration was found at Rural Site II (14,650 CFU/m³) while the outdoor maximum occurred at the urban site (16,416 CFU/m³). With reference to fungi, both indoor and outdoor concentrations were considerably higher at Rural Site I than the other sites. The size distribution of culturable bacteria at all sites showed greater variability than that of culturable fungi. At all sites more than the half (55–93%) of the culturable bacterial and fungal counts were observed in the respirable fraction (<4.7 μm) and so had the potential to penetrate into lower respiratory system.

We investigated the spatial distribution of heavy metal above-background (anthropic) contents of Cd, Co, Cu, Cr, Fe, Mn, Ni, Pb, Ti, V, and Zn in Baltimore City surface soils and related these levels to potential contaminating sources. Composite soil samples (0-10 cm depth) were digested using a nitric and hydrochloric extraction technique. Slightly more than 10% of plots exceeded United States Environmental Protection Agency screening guidelines for Pb. In a principal component analysis, the first component corresponded to Co, Cr, and Fe, which are constituents of local mafic rocks. The second component corresponded to Cu, Pb, and Zn which were significantly higher within than beyond a 100 m buffer of the major roads within the city; furthermore, Pb and Zn were higher in older residential lots.