This study describes the development of a sequential extraction procedure for the evaluation of metal nanoparticle mobility and bioaccessibility in soils. The procedure, that was developed using gold nanoparticles (AuNPs) as model species, relies on the fractionation of nanoparticles by sequentially dissolving soil matrix components (carbonates, metal oxides, organic matter and mineral phases) in order to release the entrapped nanoparticle species in the extract solution. By summing up the concentration of AuNPs recovered in each fraction it was found that 93.5% of the spiked AuNP concentration could be recovered which satisfactorily represents the nominal AuNP concentration in the soil. The efficiency of the procedure was found to depend on several procedural artifacts related to the separation of AuNPs from soil colloids and the reactivity of the extraction reagents with AuNPs and their precursor metal ions. Based on the results obtained a protocol for the speciation of the AuNPs and Au ions in the soil sample was also developed. The results of the study show that both AuNPs and Au ions are mainly associated with soil organic matter, which significantly reduces their mobility, while a small amount (<10%) is associated with metal oxides which are more mobile and potentially bioaccessible. The developed procedure provides a springboard for further development of sequential extraction procedures of metal nanoparticles in soils that could be used to assess both the exposure and release of metal nanoparticles and their precursor metal ions in the environment (as total extractable concentration) as well as provide evidence regarding their bioaccessibility and potential bioavailability by determining the concentration of nanoparticles in each specific soil fraction.

Hardpans are massively indurated layers formed at the top layer of sulfidic tailings dams, which develop cementation structures and result in heavy metal immobilization. However, the micro-structural and complex forms of the cementing materials are not fully understood, as well as the mechanisms by which Zn and Pb are stabilized in the hardpans. The present study deployed synchrotron-based X-ray fluorescence microscopy (XFM) to have characterized the cementing structures, examined the distribution of Fe, Zn and Pb, and obtained laterally-resolved speciation of Zn within the hardpans using fluorescence X-ray absorption near-edge structure (XANES) imaging. The XFM analyses revealed that the Fe-rich cement layers consisted of Fe (oxyhydr)oxides coupled with amorphous Si materials, immobilizing Zn and Pb. Through laterally-resolved XANES imaging analyses, Zn-ferrihydrite-like precipitates were predicted to account for >76% of the total Zn within the Fe-rich cement layers. In contrast, outside of the cement layers, 9–63% of the Zn was estimated as labile ZnSO4.7H2O, with the remainder in the form of Zn-sulfide. These findings demonstrated that the Fe-rich cement layers were critical in immobilizing Zn and Pb within hardpans via mineral passivation and encapsulation, as the basis for long-term geochemical stability in the hardpan layer of sulfidic mine tailings.

The behaviour of arsenic (As) from geogenic soil exposed to aerobic conditions is critical to predict the impact of As on the environment, which processes remain unresolved. The current study examined the depth profile of As in geologically derived subsoil cores from Hong Kong and investigated the mobilization, plant availability, and bioaccessibility of As in As-contaminated soil at different depths (0–45.8 m). Results indicated significant heterogeneity, with high levels of As in three layers of soil reaching up to 505 mg/kg at a depth of 5 m, 404 mg/kg at a depth of 15 m, and 1510 mg/kg at a depth of 27–32 m. Arsenic in porewater samples was <11.5 μg/L in the study site. X-ray absorption spectroscopy (XAS) indicated that main As species in soil was arsenate (As(V)), as adsorbed fraction to Fe oxides (41–69% on goethite and 0–8% on ferrihydrite) or the mineral form scorodite (30–57%). Sequential extraction procedure demonstrated that 0.5 ± 0.4% of As was exchangeable. Aerobic incubation experiments exhibited that a very small amount (0.14–0.48 mg/kg) of As was desorbed from the soil because of the stable As(V) complex structure on abundant Fe oxides (mainly goethite), where indigenous microbes partly (59 ± 18%) contributed to the release of As comparing with the sterilized control. Furthermore, no As toxicity in the soil was observed with the growth of ryegrass. The bioaccessibility of As was <27% in the surface soil using simplified bioaccessibility extraction test. Our systematic evaluation indicated that As in the geogenic soil profile from Hong Kong is relatively stable exposing to aerobic environment. Nevertheless, children and workers should avoid incidental contact with excavated soil, because high concentration of As was present in the digestive solution (<0.1–268 μg/L).

Samples of microplastic (n = 924) from two beaches in south west England have been analysed by field-portable-x-ray fluorescence (FP-XRF) spectrometry, configured in a low-density mode and with a small-spot facility, for the heavy metals, Cd and Pb, and the halogen, Br. Primary plastics in the form of pre-production pellets were the principal type of microplastic (>70%) on both beaches, with secondary, irregularly-shaped fragments representing the remainder of samples. Cadmium and Pb were detected in 6.9% and 7.5% of all microplastics, respectively, with concentrations of either metal that exceeded 103 μg g−1 usually encountered in red and yellow pellets or fragments. Respective correlations of Cd and Pb with Se and Cr were attributed to the presence of the coloured, inorganic pigments, cadmium sulphoselenide and lead chromate. Bromine, detected in 10.4% of microplastics and up to concentrations of about 13,000 μg g−1, was mainly encountered in neutrally-coloured pellets. Its strong correlation with Sb, whose oxides are effective fire suppressant synergists, suggests the presence of a variety of brominated flame retardants arising from the recycling of plastics originally used in casings for heat-generating electrical equipment. The maximum bioaccessible concentrations of Cd and Pb, evaluated using a physiological extraction based on the chemical characteristics of the proventriculus-gizzard of the northern fulmar, were about 50 μg g−1 and 8 μg g−1, respectively. These concentrations exceed those estimated for the diet of local seabirds by factors of about 50 and 4, respectively.

Cadmium (Cd) availability can be significantly affected by soil properties. The effect of pH value on Cd availability has been confirmed. Paddy soils in South China generally contain high contents of iron (Fe). Thus, it is hypothesized that Fe fractions, in addition to pH value, may play an important role in the Cd bioavailability in paddy soil and this requires further investigation. In this study, 73 paired soil and rice plant samples were collected from paddy fields those were contaminated by acid mine drainage containing Cd. The contents of Fe in the amorphous and DCB-extractable Fe oxides were significantly and negatively correlated with the Cd content in rice grain or straw (excluding DCB-extractable Fe vs Cd in straw). In addition, the concentration of HCl-extractable Fe(II) derived from Fe(III) reduction was positively correlated with the Cd content in rice grain or straw. These results suggest that soil Fe redox could affect the availability of Cd in rice plant. Contribution assessment of soil properties to Cd accumulation in rice grain based on random forest (RF) and stochastic gradient boosting (SGB) showed that pH value should be the most important factor and the content of Fe in the amorphous Fe oxides should be the second most important factor in affecting Cd content in rice grain. Overall, compared with the studies from temperate regions, such as Europe and northern China, Fe oxide exhibited its unique role in the bioavailability of Cd in the reddish paddy soil from our study area. The exploration of practical remediation strategies for Cd from the perspective of Fe oxide may be promising.

A characterization of the physical–chemical composition of the atmospheric PM adsorbed to airborne pollen was performed. Airborne pollen was sampled using a Hirst-type volumetric spore sampler and observed using a Field Emission Electron Probe Microanalyser for PM analysis. A secondary electron image was taken of each pollen grain and EDS spectra were obtained for individually adsorbed particles. All images were analysed and the size parameters of the particles adsorbed to pollen was determined. The measured particles’ equivalent diameter varied between 0.1 and 25.8 μm, mostly in the fine fraction. The dominant particulates identified were Si-rich, Organic-rich, SO-rich, Metals & Oxides and Cl-rich. Significant daily differences were observed in the physical–chemical characteristics of particles adsorbed to the airborne pollen wall. These differences were correlated with weather parameters and atmospheric PM concentration. Airborne pollen has the ability to adsorb fine particles that may enhance its allergenicity.

To explore the distribution and sources of Pb within the Three Gorges Reservoir (TGR), Pb concentrations and isotope ratios were measured in sediment cores collected from one mainstream and three tributaries. The results showed that sediments contained an average of 43.54 mg kg−1 of Pb, roughly 1.6 times higher than the geochemical background concentration. Mainstream sediments showed higher average Pb concentrations but slightly less 206Pb/207Pb and more radiogenic 207Pb/208Pb ratios than all tributaries. Most Pb occurred in reducible phases, with much less in exchangeable and oxidizable fractions; thus, Fe–Mn oxides may be the major sink of anthropogenic Pb. Bi-plots of 206Pb/207Pb versus Pb content, and of 206Pb/207Pb versus 207Pb/208Pb, indicated that coal combustion was the predominant anthropogenic Pb source for exchangeable, reducible, and oxidizable fractions, while residual Pb mainly occurred naturally. The average percentage of coal consumption contribution was 61.1% for the Pb contamination in sediments in the lower reaches in the TGR region.

Increasing use of metal and metal oxide nanoparticles [Me(O)NPs] in products means many will inevitably find their way into marine systems. Their likely fate here is sedimentation following hetero-aggregation with natural organic matter and/or free anions, putting benthic, sediment-dwelling and filter feeding organisms most at risk. In marine systems, Me(O)NPs can absorb to micro-organisms with potential for trophic transfer following consumption. Filter feeders, especially bivalves, accumulate Me(O)NPs through trapping them in mucus prior to ingestion. Benthic in-fauna may directly ingest sedimented Me(O)NPs. In fish, uptake is principally via the gut following drinking, whilst Me(O)NPs caught in gill mucus may affect respiratory processes and ion transport. Currently, environmentally-realistic Me(O)NP concentrations are unlikely to cause significant adverse acute health problems, however sub-lethal effects e.g. oxidative stresses have been noted in many organisms, often deriving from dissolution of Ag, Cu or Zn ions, and this could result in chronic health impacts.

Tetracycline antibiotics including tetracycline (TTC), oxytetracycline (OTC) and chlorotetracycline (CTC) undergo rapid transformation to yield various products in the presence of MnO₂ at mild conditions (pH 4–9 and 22 °C). Reaction rates follow the trend of CTC > TTC > OTC, and are affected by pH and complexation of TCs with Mg²⁺ or Ca²⁺. Experimental results of TTC indicate that MnO₂ promotes isomerization at the C ring to form iso-TTC and oxidizes the phenolic-diketone and tricarbonylamide groups, leading to insertion of up to 2 O most likely at the C9 and C2 positions. In contrast, reactions of OTC with MnO₂ generate little iso-OTC, but occur mainly at the A ring’s dimethylamine group to yield N-demethylated products. CTC yields the most complicated products upon reactions with MnO₂, encompassing transformation patterns observed with both TTC and OTC. The identified product structures suggest lower antibacterial activity than that of the parent tetracyclines.