Biochar modification by metals and metal oxides is considered a practical approach for enhancing the adsorption capacity of anionic compounds such as phosphate (P). This study obtained paper mill sludge (PMS) biochar (PMSB) via a one-step process by pyrolyzing PMS waste containing ferric salt to remove anionic P from water. The ferric salt in the sludge was transformed into ferric oxide and zero-valent-iron (Fe⁰) in N₂ atmosphere at pyrolysis temperatures ranging from 300 to 800 °C. The maximum adsorption (Qₘ) of the PMSBs for P ranged from 9.75 to 25.19 mg P/g. Adsorption is a spontaneous and endothermic process, which implies chemisorption. PMSB obtained at 800 °C (PMSB800) exhibited the best performance for P removal. Fe⁰ in PMSB800 plays a vital role in P removal via adsorption and coprecipitation, such as forming the ≡Fe–O–P ternary complex. Furthermore, the possible chemical precipitation of P by CaO decomposed from calcite (CaCO₃; an additive of paper production that remains in PMS) may also contribute to the removal of P by PMSB800. Moreover, PMSBs can be easily separated magnetically from water after application and adsorption. This study achieved a waste-to-wealth strategy by turning waste PMS into a metal/metal oxide-embedded biochar with excellent P removal capability and simple magnetic separation properties via a one-step pyrolysis process.

Faced with an increasing amount of industrial solid waste (ISW) in the process of rapid industrialization, it is indispensable to carry out ISW metabolism study to realize source and waste reduction. In this study, a new composite waste input-output (WIO) model is developed to examine ISW production and production relationships among different sectors. In particular, the extended methods of network control analysis and network utility analysis are used in the ecological network analysis under two ISW scenarios (i.e. common industrial solid waste (CISW) and hazardous waste (HW) scenarios). Furthermore, comprehensive utilization analysis is first developed to evaluate the ISW utilization level and to guide the planning of sectors with large proportion of ISW production. A case study of Guangdong, China shows that indirect flow analysis can be used to understand the internal ISW metabolism structure. The mining sectors produce a large amount of direct ISW and perform a low level of comprehensive utilization, but they have mutualism relationships with other sectors. The energy transformation (EH) sector in the CISW system has high direct generation intensity and plays as a main controller. The situation of paper manufacturing (MP) sector in HW system is similar to that of EH. Therefore, it is expected that the results of this study will provide scientific foundations for these sectors to formulate future ISW reduction policies.

We investigated whether there might be excess ovarian cancer mortality among women residing near Spanish industries, according to different categories of industrial groups and toxic substances. An ecologic study was designed to examine ovarian cancer mortality at a municipal level (period 1997–2006). Population exposure to pollution was estimated by means of distance from town to facility. Using Poisson regression models, we assessed the relative risk of dying from ovarian cancer in zones around installations, and analyzed the effect of industrial groups and pollutant substances. Excess ovarian cancer mortality was detected in the vicinity of all sectors combined, and, principally, near refineries, fertilizers plants, glass production, paper production, food/beverage sector, waste treatment plants, pharmaceutical industry and ceramic. Insofar as substances were concerned, statistically significant associations were observed for installations releasing metals and polycyclic aromatic chemicals. These results support that residing near industries could be a risk factor for ovarian cancer mortality.

Decades of intensive discharge from industrial activities into coastal systems has resulted in the accumulation of a variety of persistent organic pollutants (POPs) in marine waters and sediments, having detrimental impacts on aquatic ecosystems and the resident biota. POPs are among the most hazardous chemicals originating from industrial activities due to their biotoxicity and resistance to environmental degradation. Bacterial communities are known to break down many of these aromatic compounds, and different members of naturally occurring bacterial consortia have been described to work in syntrophic association to thrive in heavily contaminated waters and sediments, making them potential candidates as bioindicators of environmental pollution. In this study environmental, sampling was combined with chemical analysis of pollutants and high-resolution sequencing of bacterial communities using Next Generation Sequencing molecular biology tools. The aim of the present study was to describe the bacterial communities from marine sediments containing high loads of POPs and to identify relevant members of the resident microbial communities that may act as bioindicators of contamination. Marine sediments were collected from a coastal bay area of the Baltic Sea historically influenced by intense industrial activity, including metal smelting, oil processing, and pulp and paper production. Different types of POPs were detected at high concentrations. Fiberbank sediments, resulting from historic paper industry activity, were found to harbour a clearly distinct bacterial community including a number of bacterial taxa capable of cellulolytic and dechlorination activities. Our findings indicate that specific members of the bacterial communities thrive under increasing levels of POPs in marine sediments, and that the abundances of certain taxa correlate with specific POPs (or groups), which could potentially be employed in monitoring, status assessment and environmental management purposes.

The aim of the study is to select a cellulosic waste material from paper industry solid wastes and process it for sorbent production. Four different solid wastes were collected from a local paper production facility and rejects were selected due to its sorption capacity and processability. Oil sorption experiments were conducted according to the ASTM F 726-12 method. Effect of sorbent dosage, contact and dripping time, recovery of the oil, reusability of the sorbent and sorption from the water surface were also determined. Maximum oil sorption capacity was determined as 9.67, 12.92 and 12.84g/g for diesel oil, 0W30 and 10W30 motor oils respectively for the static test and 8.27, 10.45 and 11.69g/g for the dynamic test. An efficient and low-cost sorbent was produced from paper industry rejects that can be used on land and on water.

Waste management is the protection of the environment and the health of the population. Paper waste sludge is produced during paper production and sepiolite is a natural clay mineral. The aim of the study was to investigate the usability of sepiolite-added paper waste sludge as a bedding material in the broiler production. Two hundred eighty-eight 1-day old male broiler chicks were divided into the 6 bedding material groups (wood shavings (control), paper waste sludge, sepiolite, mix of 25% paper waste sludge and 75% sepiolite, mix of 50% paper waste sludge and 50% sepiolite, and mix of 75% paper waste sludge and 25% sepiolite) with 6 replicate pens per group. Litter quality, performance, and some welfare parameters of broilers were assessed during the 6 weeks’ period. Body weight at 42 days of age and body weight gain from 0 to 42 days of broilers reared on the wood shavings and mix of 50% paper waste sludge and 50% sepiolite were found higher than those of the sepiolite and paper waste sludge groups. Feed consumption and feed to gain ratio from 0 to 42 days, yields of carcass and carcass parts, percentages of organs and abdominal fat, IgG, percentage of bursa Fabricius, burns of foot pad and breast, litter pH and meat properties of broilers reared on the wood shavings, paper waste sludge, and sepiolite litter groups were not found to be statistically different. Litter moisture was found higher in the paper waste sludge group than that in the sepiolite group at the 42 days of rearing. As a conclusion, usage of mix of 50% paper waste sludge and 50% sepiolite as a litter does not have any negative effects on performance, welfare, and litter quality. This result is important in terms of utilizing a waste product.

When old corrugated cardboard (OCC) is returned to the paper mill for repulping and reuse, the starch, which is added to the paper surface as a reinforcement agent, is dissolved into the pulping wastewater. Most of the OCC pulping wastewater is recycled to save precious water resources; however, during the water recycling process, the accumulation of dissolved starch stimulates microbial reproduction, which causes poor water quality and putrid odor. This problem seriously affects the stability of the papermaking process and product quality. In this study, phosphomolybdic acid (H₃PMo₁₂O₄₀, abbreviated as PMo₁₂) was utilized to catalyze the waste starch present in papermaking wastewater to monosaccharides, realizing the resource utilization of waste starch. The results showed that the optimized yield of total reducing sugar (78.68 wt%) and glycolic acid (12.83 wt%) was achieved at 145 °C with 30 wt% PMo₁₂ at pH 2, which is equivalent to 91.51 wt% starch recovered from wastewater for resource utilization. In addition, the regeneration of the reduced PMo₁₂ was realized by applying a potential of 1 V for 2 h. Overall, this study has theoretical significance and potential application value for resource utilization of waste starch in OCC pulping process and cleaner management of OCC waste paper.

This paper explores the regulation of water quality protection downstream from the Ranger Uranium Project in the Alligator Rivers Region, an area of high conservation value which is both World Heritage- and Ramsar-listed. Available historical monitoring data for surface water quality in Magela Creek downstream of Ranger have been compiled and analysed with respect to hydrologic data and the Australian and New Zealand Environment and Conservation Council–Agricultural and Resource Management Council of Australia and New Zealand (ANZECC–ARMCANZ) regulatory guidelines, introduced in late 2000. The paper focuses on the underlying scientific basis for the current approach and examines the complex inter-relationships of minesite water management, hydrology, climate, monitoring design, implementation and interpretation which are used to differentiate between natural variability and potential mine-derived solutes. The research found that the application of the ANZECC–ARMCANZ guidelines has clearly improved the regulation of water quality protection downstream from the Ranger Uranium Project. The scientific basis is more coherent than the previous regulatory regime; however, for U (a key parameter of indigenous Mirarr-Gundjeihmi and public concern), higher downstream concentrations are permitted than those observed through natural variability, leaving open the potential for an influence of mine-derived U loads while still being within regulatory limits. Another improvement that could be made to the current regulatory regime, to provide enhanced protection of the water quality in Magela Creek downstream of Ranger, would be to explicitly link the water quality monitoring regime with hydrologic flow conditions. The paper makes a valuable case study for the application of water quality guidelines, especially for controversial projects such as uranium mining surrounded by a World Heritage- and Ramsar-listed region on indigenous land—a context of clear relevance for many places around the world.

This study focused on the feasibility of using Fe₃O₄/graphene oxide (FGO) nanocomposites as heterogeneous catalysts for the advanced treatment of real industrial wastewater. FGO nanocomposites with different graphene oxide (GO) ratios were synthesized by coprecipitating iron salts onto GO sheets in basic solution. The characterization of the resulting material structures and functionalities was performed using a range of analytical techniques. A low GO loading afforded a good Fe₃O₄ nanoparticle dispersibility and resulted in a higher Brunauer–Emmett–Teller surface area and pore volume. The FGO nanocomposites and pure Fe₃O₄ were used to treat papermaking wastewater in a heterogeneous photo-Fenton process. The results suggested that the nanocomposite designated FGO1 (GO loading of 25 mg) exhibits a higher photocatalytic efficiency than other FGO nanocomposites and pure Fe₃O₄. A maximum chemical oxygen demand degradation efficiency of 89.6% was achieved in 80 min with 1.5 g L⁻¹ FGO1 at pH 3. The degradation of different pollutants present in wastewater was evaluated with the aid of gas chromatography–mass spectrometry and 3D excitation–emission-matrix analysis. Inductively coupled plasma atomic emission spectroscopy and magnetic measurements confirmed that the FGO1 nanocomposites possess a low iron leachability and a high reusability. Thus, a comprehensive advanced treatment of real industrial wastewater using a magnetic FGO catalyst is demonstrated.

Photocatalysis has emerged as a promising approach for treating environmental pollution. In this study, TiO₂/sponge composites with good photocatalytic activity in visible light were prepared via a simple and efficient low-temperature process and applied to the degradation of 2,4,6-trichlorophenol (2,4,6-TCP) present in papermaking wastewater. The process conditions for preparing TiO₂/sponge composites were optimized by varying the TiO₂ dosage, cellulose dosage, and surfactant concentration. Scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) results showed that TiO₂ successfully adhered to the sponge surface and that the composites achieved a good recycling effect. Degradation occurred under visible light, and a degradation rate of 81% for 2,4,6-TCP with initial concentration of 20 mg/L was achieved in 4 h. The fragments were analyzed using ultra-performance liquid chromatography tandem mass spectrometry (UPLC-MS), which revealed the formation of 2-hydroxyvaleric acid (2-HVA) as a degradation product; a possible degradation mechanism is proposed to interpret these findings. Visible-light photocatalysis shows high potential for the rapid and environmentally friendly destruction of organic pollutants in papermaking wastewater.