Microbiota associated with airborne particulate matter (PM) is an important indicator of indoor pollution as they can be pathogenic and cause serious health threats to the exposed occupants. Present study aimed to investigate the level of culturable microbes associated with PM and their toxicological characterization in urban and rural houses of Pune city. Highest concentration of bacterial aerosols observed to be associated with PM₁₀ size fraction in urban site (2136 ± 285 CFU/m³) whereas maximum fungal concentration has been measured in rural houses (1521 ± 302 CFU/m³). Predominantly found bacterial species were Bacillus sp., S. aureus, and Pseudomonas aeruginosa and fungal species were Aspergillus sp., Cladosporium sp., and Penicillium sp. in both urban and rural residential premises. Concentration of endotoxin measured using the kinetic Limulus Amebocyte Lysate assay exhibited that the level of endotoxin in both urban and rural sites are associated with household characteristics and the activities performed in indoor as well as outdoor. Cell free DTT assay confirmed the ability of these airborne microbes to induce the production of reactive oxygen species (ROS) varying along with the types of microorganisms. On exposure of A549 cells to airborne microbes, a significant decrease in cell viability was observed in terms of both necrosis and apoptosis pathway. Elevated production of nitric oxide (NO) and proinflammatory cytokines in epithelial cells and macrophages clearly suggest the inflammatory nature of these airborne microbes. Results derived from the present study demonstrated that the indoor air of urban and rural houses of Pune is contaminated in terms of microbial load. Therefore, attention should be paid to control the factors favoring the microbial growth in order to safeguard the health of exposed inhabitants.

Airborne fungal spores, a type of bioaerosols, are significant air pollutants. We conducted a study to determine the spatiotemporal distributions of ambient fungi in the Greater Taipei area and develop land use regression (LUR) models for total and major fungal taxa. Four seasonal sampling campaigns were conducted over a year at 44 representative sites. Multiple regressions were performed to construct the LUR models. Ascospores were the most prevalent category, followed by Aspergillus/Penicillium, basidiospores, and Cladosporium. The highest fungal concentrations were found in spring. According to the LUR models, higher concentrations of Aspergillus/Penicillium and basidiospores were respectively present in residential/commercial areas and in areas with shorter road lengths. Various meteorological factors, particulates with aerodynamic diameters of ≤10 μm, and elevation also had significant relationships with fungal concentrations. The LUR models developed in this study can be used to assess spatiotemporal fungal distribution in the Greater Taipei area.

For some years, the degradation of homes by the dry rot fungus Serpula lacrymans increased. This study described, for the first time, the fungal contamination in homes located in Low–Normandy (France) and damaged by Serpula lacrymans. Wood–decaying fungi, airborne molds, fungal species growing on building materials were investigated by cultural and molecular methods. Mycotoxins in the air were quantified by HPLC–MS/MS and the mutagenicity of fungal aerosols was also evaluated using the Ames test. The results showed that Serpula lacrymans was detected in the air for one third of homes with sometimes the co–occurrence of other ligninolytic basidiomycetes species like Donkioporia expansa. Various molds in the air and on materials (117 and 103 species, respectively) were also identified indicating the complexity of indoor mycoflora. Certain recurrent species like Aspergillus versicolor and Penicillium fellutanum were observed both on building materials and in the air. The presence of cellulolytic molds in fungal aerosols and on building materials could be used as an indicator of home degradation. Airborne culturable fungal levels were measured up to 5.8x105 Colony Forming Units (CFU) per cubic meter of the air (CFU/m3) depending on the home. Fungal concentrations also depended on the type of collector (filter or liquid) and were significantly correlated with the median of particles between 2–15μm in size. Two mycotoxins (alternariol and/or ochratoxin A) were observed in 4 homes but no mutagenic activity was found.

Numerous countries have been confronted with infectious diseases in mariculture activities, including fungi infections, although reports in scallops are scarce. Thus, this study aimed to investigate the occurrence of filamentous fungi in Nodipecten nodosus specimens from three marine farms in Southeastern Brazil. Eight fungi genera were observed in the branchial arches, intestine and muscle tissue of the scallop specimens. These include potentially toxin-producing species, such as Aspergillus, Penicillium and Fusarium. Their presence may lead to potential public health concerns, since all sampling sites showed the presence of fungi in all scallop organs, with special concern regarding edible muscle tissue. A significant number of species was observed at one of the study areas, which could indicate a previously unknown source of contamination, since increases in fungi species richness in polluted coastal waters have been reported. This is also, to the best of our knowledge, the first report of Pestalotiopsis in shellfish.

Open landfilling is a common practice of waste dumping in developing countries, generating a range of environmental and public health hazards. In this study, we determined the distribution, composition and exposure risk of the size-segregated fungal and bacterial bioaerosols in an open landfill site in Dehradun, India. Bioaerosol and particulate matter (PM) measurements were carried out using a six-stage viable Andersen Cascade Impactor and a Wide Range Aerosol Spectrometer, respectively. Pearson correlation analysis was used to determine the relation of bioaerosol concentration with meteorological parameters and PM. The mean concentration of fungal and bacterial aerosols was observed to be 4582.75 ± 1358.25 CFU/m3 and 3609.53 ± 1000.28 CFU/m3, respectively. The bioaerosol composition showed the predominance of potential pathogens including Aspergillus (25.42%), Penicillium (20.34%), Cladosporium (15.25%), Alternaria (13.56%); and gram-negative Bacillus (21.15%), Streptobacillus (17.31%), Coccus (13.46%). Also, an inhalation risk assessment was conducted for the age-specific predictions of bioaerosol and PM deposition in human airways using a multiple path particle dosimetry model. For bioaerosols, maximum submicron depositions in the pulmonary region were observed in adults, while for PM, in children and infants. Finally, to identify the bioaerosol exposure caused respiratory disorders, a questionnaire-based health survey was conducted among the exposed population around the landfill site. The chi-square test showed significantly higher respiratory complaints in females for cold, cough, chest pain and chest tightness than in males. This work highlights the role of bioaerosols and PM in human health disorders in occupational environments associated with waste management.

In degradation of total petroleum hydrocarbon, 35 isolates belonging to 11 genera were sanitized and 3 isolates as well as their consortium were initiated to be able to raise in association with petroleum hydrocarbon as sole source of carbon under in vitro circumstances. The isolated strains were grounded on internal transcribed spacer (ITS) rDNA sequence analysis. The fungal strains with the utmost potentiality to reduce petroleum hydrocarbon without emerging antagonistic activities were Aspergillus niger, Penicillium ochrochloron, and Trichodema viride. For fungal growth on petroleum hydrocarbon, P. ochrocholon gained weight of 44%, A. niger 49%, and T. viride 39% within the first 30–40 days. As compared to the controls, these fungi accumulated significantly higher biomass, produced extracellular enzymes, and degraded total petroleum hydrocarbon and A. niger strongly degraded total petroleum hydrocarbon with a degradation of about 71.19%. These observations with GC-MS data confirm that these isolates displayed rapid total petroleum hydrocarbon biodegradation within a period of 60 days and the half-life showed that A. niger was the shortest with t1/2 = 21.280 day⁻¹ corresponding to the highest percent degradation of 71.19% and first-order kinetic fitted into the present study. By multivariate analysis, five main factors were identified by factor analysis (FA). The first factor (F1) of the fungi species accounts for 20.0% which signifies that fungi species controls the degradation of petroleum variability and hierarchical cluster analysis (HCA) as a dendrogram with five observations and three variables shows two predominant clusters order cluster 1 > 2.

Investigations were made on living strains of fungi in a bioremediation process of three metal (lead) contaminated soils. Three saprotrophic fungi (Aspergillus niger, Penicillium bilaiae, and a Penicillium sp.) were exposed to poor and rich nutrient conditions (no carbon availability or 0.11 M d-glucose, respectively) and metal stress (25 µM lead or contaminated soils) for 5 days. Exudation of low molecular weight organic acids was investigated as a response to the metal and nutrient conditions. Main organic acids identified were oxalic acid (A. niger) and citric acid (P. bilaiae). Exudation rates of oxalate decreased in response to lead exposure, while exudation rates of citrate were less affected. Total production under poor nutrient conditions was low, except for A. niger, for which no significant difference was found between the poor and rich control. Maximum exudation rates were 20 µmol oxalic acid g⁻¹ biomass h⁻¹ (A. niger) and 20 µmol citric acid g⁻¹ biomass h⁻¹ (P. bilaiae), in the presence of the contaminated soil, but only 5 µmol organic acids g⁻¹ biomass h⁻¹, in total, for the Penicillium sp. There was a significant mobilization of metals from the soils in the carbon rich treatments and maximum release of Pb was 12% from the soils after 5 days. This was not sufficient to bring down the remaining concentration to the target level 300 mg kg⁻¹ from initial levels of 3,800, 1,600, and 370 mg kg⁻¹in the three soils. Target levels for Ni, Zn, and Cu, were 120, 500, and 200 mg kg⁻¹, respectively, and were prior to the bioremediation already below these concentrations (except for Cu Soil 1). However, maximum release of Ni, Zn, and Cu was 28%, 35%, and 90%, respectively. The release of metals was related to the production of chelating acids, but also to the pH-decrease. This illustrates the potential to use fungi exudates in bioremediation of contaminated soil. Nonetheless, the extent of the generation of organic acids is depending on several processes and mechanisms that need to be further investigated.

Exudation of low molecular weight organic acids by fungi was studied in a project focusing on bioremediation of metal-contaminated soils. The production of acids (mainly oxalic and citric acid) as a response to nutrient variations and presence of metals has recently been reported (Arwidsson et al. 2009). A significant release of metals was observed and was related not only to the production of organic acids but also to the resulting pH decrease in the systems. The processes governing the release and redistribution of metals in the soil–water fungus system were the focus of the present continuation of the project, based on observations of Aspergillus niger, Penicillium bilaiae, and a Penicillium sp. The release of lead was 12% from the soil with the second highest initial load (1,600 mg kg−1), while the release of copper was 90% from the same soil (140 mg kg−1). The dominating mechanism behind the release and subsequent redistribution was the change in pH, going from near neutral to values in the range 2.1–5.9, reflecting the production of organic acids. For some of the systems, the formation of soluble complexes is indicated (copper, at intermediate pH) which favors the metal release. Iron is assumed to play a key role since the amount of secondary iron in the soils is higher than the total load of secondary heavy metals. It can be assumed that most of the heavy metals are initially associated with iron-rich phases through adsorption or coprecipitation. These phases can be dissolved, or associated metals can be desorbed, by a decrease in pH. It would be feasible to further develop a process in technical scale for remediation of metal-contaminated soil, based on microbial metabolite production leading to formation of soluble metal complexes, notably with copper.

Dust events impose negative socio-economic, health, and environmental impacts on vulnerable areas and reflect their sources’ physiochemical and biological characteristics. This study aimed to assess the impact of two dust sources on the concentration and diversity of airborne fungi in one of the dustiest areas in the world. This study is the first attempt to investigate the relationship between dust sources fungal community and those in airborne dust. Also, the contribution of dust sources to airborne fungi was estimated. Air masses arriving at the study area were assessed using local wind rose and the HYSPLIT model. Sampling was carried out from airborne dust at the Arvand Free Zone as target areas and soil in the dried parts of the Hor al-Azim and Shadegan wetlands as source areas to explore the relationship between fungi in the dust sources and the downwind area. The samples were analyzed in the lab to extract DNA. The internal transcribed spacer (ITS) regions of the rDNA gene were amplified using the primers ITS1F and ITS4, and then PCR products were sent to the lab for sequencing. The raw DNA data were processed using the QIIME virtual box to pick operational taxonomic units and taxonomy assignments. The most common fungi at the genus level were in the order of Penicillium > Aspergillus > Alternaria > Fusarium > Paradendryphiella > Talaromyces. The similarity between air and soil fungal genera was investigated using richness and diversity indices, the phylogenetic tree, and principal component analysis. The results showed that the community structures of ambient fungi in the Hor al-Azim and Shadegan dust sources were more similar to those on dusty days than non-dusty days. The source tracker model was used to quantify the contributions of known dust sources to airborne fungi. The results showed that the main source of airborne fungi was Hor al-Azim on dusty and non-dusty days. This study’s results can help managers identify and prioritize dust sources regarding fungal species.