Polyethylene terephthalate (PET) and Zeolitic Imidazolate Framework-8 (ZIF-8) were used to investigate the feasibility of producing electrospun PET/ZIF-8 polymer media in removing particles from the air stream to compare with the HEPA filter. To make PET/ZIF-8 media, concentrations of 0.5, 1, 2.5, and 5 wt.% of ZIF-8 were dissolved in PET20% solutions, and dispersed for 10 min. Then, PET/ZIF-8 media was produced with an ESDP30 model electrospinning device. The efficiency and pressure drop of nanofiber media were measured with a respiratory mask and filter test device. The FTIR, XRD and SEM analysis were carried out to obtain the characteristics of nanofibers. The overall XRD pattern and its peaks were in reasonable agreement with previous findings that confirmed the structure of ZIF-8. The FTIR spectra of the obtained materials confirm that the chemical bond structure corresponds to that reported for ZIF-8. In total, The PET/ZIF-8(1%) media efficiency, pressure drop, the average diameter of nanofibers, and the quality factor were 100%, 320 Pa, 171.18±37.91 nm and 0.0143 Pa-1, respectively, which was better than other electrospun PET/ZIF-8 media and HEPA filters. According to the results, with an increase in the weight percentage of Zif-8 (>5 wt.%) in the structure of PET/Zif-8 media, due to the increase in the viscosity of the solution jet, the diameter of the produced nanofibers increased and the efficiency of the electrospinning medium decreased.

Repeated reports of microplastic pollution in the marine pinniped diet have emerged in the last years. However, only few studies address the drivers of microplastics presence and the potential implications for monitoring microplastic pollution in the ocean. This study monitored their in the scats (N = 205) of four pinniped species/subspecies at five different locations in the southern Pacific Ocean (Peru and Chile). Samples from all rookeries contained microplastics, and overall, 68% of the examined scats contained fragments/fibers, mostly blue colored. We confirmed that 81.5% of the fragments/fibers were anthropogenic in origin , but only 30% were polymers. Scats from Juan Fernandez Archipelago presented higher microplastic concentrations than continental rookeries. Also, the common diet in each location may influence the levels found in the samples. This study presents a useful non-invasive technique to track plastic pollution in top predator diets as bioindicators for future surveillance/management plans applied to different location. | Rufford Foundation: N 18815-1. Dirección de Investigación y Doctorados, Universidad Andres Bello. Comisión Nacional de Investigación Científica y Tecnológica (CONICYT), CONICYT FONDECYT: 11150548, 116504, 111609059. Instituto Antártico Chileno Grant: INACh RT_12_17. Conicyt PCI: REDI 170292, REDI 170403. Ministerio de Economia, Fomento y Turismo through Iniciativa Científica Milenio (Núcleo Milenio INVASAL). Direccion de Investigación Universidad de Variarais: DIUV 38/2013. Morris Animal Foundation fellowship: N D16ZO-413. Saint Louis Zoo. Chicago Zoological Society. Kansas City Zoo. Woodland Park Zoo.

In response to the growing worldwide plastic pollution problem, the field of nanoplastics research is attempting to determine the risk of exposure to nanoparticles amidst their ever-increasing presence in the environment. Since little is known about the attributes of environmental nanoplastics (concentration, composition, morphology, and size) due to fundamental limitations in detection and quantification of smaller plastic particles, researchers often improvise by engineering nanoplastic particles with various surface modifications as models for laboratory toxicological testing. Polystyrene and other commercially available or easily synthesized polymer materials functionalized with surfactants or fluorophores are typically used for these studies. How surfactants, additives, fluorophores, the addition of surface functional groups for conjugation, or other changes to surface attributes alter toxicological profiles remains unclear. Additionally, the limited polymers used in laboratory models do not mimic the vast range of polymer types comprising environmental pollutants. Nanomaterials are tricky materials to investigate due to their high surface area, high surface energies, and their propensity to interact with molecules, proteins, and biological probes. These unique properties can often invalidate common laboratory assays. Extreme care must be taken to ensure that results are not artefactual. We have gathered zeta potential values for various polystyrene nanoparticles with different functionalization, in different solvents, from the reported literature. We also discuss the effects of surface engineering and solvent properties on interparticle interactions, agglomeration, particle-protein interactions, corona formation, nano-bio interfaces, and contemplate how these parameters might confound results. Various toxicological exemplars are critically reviewed, and the relevance and shortfalls of the most popular models used in nanoplastics toxicity studies published in the current literature are considered.

Microbial biofilms can rapidly colonize plastic debris in aquatic environments and subsequently, accumulate chemical pollutants from the surrounding water. Here, we studied the microbial colonization of different plastics, including polyethylene terephthalate (PET), polypropylene (PP), polyvinyl chloride (PVC), and polyethylene (PE) exposed in three freshwater systems (the Qinhuai River, the Niushoushan River, and Donghu Lake) for 44 days. We also assessed the biofilm mass and associated metals attached to plastics. The plastics debris characteristics, such as contact angle and surface roughness, greatly affected the increased biofilm biomass. All types of metal accumulation onto the plastic substrate abundances significantly higher than the concentrations of heavy metal in the water column, such as Ba (267.75 μg/g vs. 42.12 μg/L, Donhu Lake), Zn (254 μg/g vs. 0.023 μg/L the Qinhuai River), and Cr (93.75 μg/g vs. 0.039 μg/L, the Niushoushan River). Compared with other metals, the heavy metal Ba, Cr and Zn accumulated easily on the plastic debris (PET, PP, PVC, and PE) at all incubation sites. Aquatic environmental factors (total nitrogen, total phosphorus, and suspended solids concentrations) largely shaped metal accumulation onto plastic debris compared with plastic debris properties.

Brominated flame retardants (BFRs) are an important group of additives in plastics that increase resistance to ignition and slow down the rate of burning. Because of concerns about their environmental and human health impacts, however, some of the most widely employed BFRs, including hexabromocyclododecane (HBCD) and commercial mixtures of penta-, octa- and deca- (poly)bromodiphenyl ethers (PBDEs), have been restricted or phased out. In this review, the oceanic sources and pathways of PBDEs, the most widely used BFRs, are evaluated and quantified, with particular focus on emissions due to migration from plastics into the atmosphere versus emissions associated with the input of retarded or contaminated plastics themselves. Calculations based on available measurements of PBDEs in the environment suggest that 3.5 and 135 tonnes of PBDEs are annually deposited in the ocean when scavenged by aerosols and through air-water gas exchange, respectively, with rivers contributing a further ∼40 tonnes. Calculations based on PBDE migration from plastic products in use or awaiting or undergoing disposal yield similar net inputs to the ocean but indicate a relatively rapid decline over the next two decades in association with the reduction in the production and recycling of these chemicals. Estimates associated with the input of PBDEs to the ocean when “bound” to marine plastics and microplastics range from about 360 to 950 tonnes per year based on the annual production of plastics and PBDEs over the past decade, and from about 20 to 50 tonnes per annum based on the abundance and distribution of PBDEs in marine plastic litter. Because of the persistence and pervasiveness of plastics in the ocean and diffusion coefficients for PBDEs on the order of 10⁻²⁰ to 10⁻²⁷ m² s⁻¹, microplastics are likely to act as a long-term source of these chemicals though gradual migration. Locally, however, and more important from an ecotoxicological perspective, PBDE migration may be significantly enhanced when physically and chemically weathered microplastics are exposed to the oily digestive fluids conditions of fish and seabirds.

The settling of microplastics (MPs) is crucial for their removal from municipal wastewater treatment plants (WWTPs) and sedimentation in static waterbodies, where they can accumulate in bottom sediments. Biofilm formation on MPs enhances their aggregation with other particles, thereby changing their density and size and altering their settling rates. However, only a few studies have investigated the settling of MPs of different sizes and materials. Specifically, the settling of small-sized MPs (<150 μm) has been poorly documented. In this study, cylindrical and fragmented particles of four polymer types (high-density polyethylene (HDPE), polypropylene (PP), polystyrene (PS), and poly(ethylene terephthalate) (PET)) were used to investigate the settling or floating of reference MPs (20–130 μm) in a custom-made column that simulated a primary sedimentation tank in a typical WWTP before and after incubation in wastewater influent. The settling velocity of the reference MP particles was strongly influenced by the particle size and density. The settled fractions of all the cylindrical reference MPs increased significantly (up to 5 times) due to biofilm formation at overflow velocities of 0.15, 0.26, and 0.40 mm s⁻¹. This was observed even for HDPE and PP (density <1 g cm⁻³) after biofilm formation. The fragmented reference MPs showed complex and rather unpredictable behavior, possibly due to their irregular shape. Generally, the settling of pristine PS and PET in the laboratory tests was consistent with the theoretical predictions obtained using Stokes’ law. The experimental findings of this study can be used to develop models that predict the removal efficiencies of MPs in WWTPs and to estimate the sinking of MPs to bottom sediments of static waterbodies.

Microplastics debris in the marine environment have been widely studied across the globe. Within these particles, the most abundant and prevalent type in the oceans are anthropogenic microfibers (MFs), although they have been historically overlooked mostly due to methodological constraints. MFs are currently considered omnipresent in natural environments, however, contrary to the Northern Hemisphere, data on their abundance and distribution in Southern Oceans ecosystems are still scarce, in particular for sub-Antarctic regions. Using Niskin bottles we've explored microfibers abundance and distribution in the water column (3–2450 m depth) at the Burdwood Bank (BB), a seamount located at the southern extreme of the Patagonian shelf, in the Southwestern Atlantic Ocean. The MFs detected from filtered water samples were photographed and measured using ImageJ software, to estimate length, width, and the projected surface area of each particle. Our results indicate that small pieces of fibers are widespread in the water column at the BB (mean of 17.4 ± 12.6 MFs.L⁻¹), from which, 10.6 ± 5.3 MFs.L⁻¹ were at the surface (3–10 m depth), 20 ± 9 MFs.L⁻¹ in intermediate waters (41–97 m), 24.6 ± 17.3 MFs.L⁻¹ in deeper waters (102–164 m), and 9.2 ± 5.3 MFs.L⁻¹ within the slope break of the seamount. Approximately 76.1% of the MFs were composed of Polyethylene terephthalate, and the abundance was dominated by the size fraction from 0.1 to 0.3 mm of length. Given the high relative abundance of small and aged MFs, and the oceanographic complexity of the study area, we postulate that MFs are most likely transported to the BB via the Antarctic Circumpolar Current. Our findings imply that this sub-Antarctic protected ecosystem is highly exposed to microplastic pollution, and this threat could be spreading towards the highly productive waters, north of the study area.

Microplastics (MPs) are widely found in coastal areas and oceans worldwide. The MPs are environmentally concerning due to their bioavailability and potential impacts on a wide range of marine biota, so assessing their impact on the biota has become an urgent research priority. In the present study, we exposed Crassostrea gigas oysters to irregular MPs of two polymer types (polyethylene (PE) and polyethylene terephthalate (PET)) at concentrations of 10 and 1000 μg L⁻¹ for 21 days. Accumulation of MPs, changes in metabolic enzyme activity, and histological damage were evaluated, and metabolomics analysis was conducted. Results demonstrated that PE and PET MPs were detected in the gills and digestive gland following exposure to both tested concentrations, confirming ingestion of MPs by the organisms. Moreover, both PE and PET MPs inhibited lipid metabolism, while energy metabolism enzyme activities were activated in the oysters. Histopathological damage of exposed oysters was also observed in this study. Integrated biomarker response (IBR) results showed that MPs toxicity increased with increasing MPs concentration, and the toxic effects of PET MPs on oysters was greater than PE MPs. In addition, metabolomics analysis suggested that MPs exposure induced alterations in metabolic profiles in oysters, with changes in energy metabolism and inflammatory responses. This study reports new insights into the consequences of MPs exposure in marine bivalves at environmentally relevant concentrations, providing valuable information for ecological risk assessment of MPs in a realistic conditions.

Plastics accumulate in the environment and the Mediterranean Sea is one of the most polluted sea in the world. The plastic surface is rapidly colonized by microorganisms, forming the plastisphere. Our unique sampling supplied 107 plastic pieces from 22 geographical sites from four aquatic ecosystems (river, estuary, harbor and inshore) in the south of France in order to better understand the parameters which influence biofilm composition. In parallel, 48 enrichment cultures were performed to investigate the presence of plastic degrading-bacteria in the plastisphere. In this context, we showed that the most important drivers of microbial community structure were the sampling site followed by the polymer chemical composition. The study of pathogenic genus distribution highlighted that only 11% of our plastic samples contained higher proportions of Vibrio compared to the natural environment. Finally, results of the enrichment cultures showed a selection of hydrocarbon-degrading microorganisms suggesting their potential role in the plastic degradation.

This study focuses on the presence of MPs in the sediment beds around coral reefs of MPNPs in Baja California Sur, México. Based on seasonal sampling results, comparison of MPs from Cabo Pulmo (avg. 680.25 items/100 g⁻¹ d.w) recorded higher values than Espiritu Santo Island (avg. 321.75 items/100 g⁻¹ d.w) from backshore/foreshore regions. Fibrous MPs are the dominant morphotypes followed by fragments and spheres. SEM/EDS analysis revealed that the MPs are altered texturally in surface and is bioavailable to marine organisms independent of size/shape. FTIR analysis indicate different polymers (in %) in the form of PP (70), PET (65), HDPE (59), LDPE (50), PS (30), PC (18), PU (10) and RYN (10). Most of the MPs are secondary in origin resulting from man-made and tourist's activities controlled by wave transportation and tidal currents. Existence of MPs in sediment beds around the coral reefs signals the ways for future investigations.