The aim of this study was to evaluate and compare three species of ligninolytic fungi (Trametes versicolor, Bjerkandera adusta, and Phanerochaete chrysosporium) in laboratory-scale columns with respect to their efficiency for the treatment of raw tequila vinasse, in order to assess the feasibility of incorporating this type of fungi in vertical flow treatment wetlands. The following parameters were analyzed at the inlets and outlets of the columns: total suspended solids (TSS), total dissolved solids (TDS), chemical oxygen demand (COD), biological oxygen demand (BOD₅), pH, electrical conductivity (EC), true and apparent color, total nitrogen (TN), nitrites (NO₂⁻), nitrates (NO₃⁻), and total phosphates. The performance of the 3 fungi was very similar (p > 0.05), although T. versicolor showed a trend towards higher efficiencies for the removal of TSS, TN, total phosphates, and COD. The removal efficiencies of TSS were 73.1%, 80.2%, and 78.8% for B. adusta, T. versicolor, and P. Chrysosporium, respectively; for TN removal, the efficiencies were 64.7%, 65.7%, and 60.6%, respectively. The higher removal percentage for COD (10.2%) was obtained in the column with T. versicolor. These results demonstrate the tolerance of the fungi to raw tequila vinasse, their role in reducing pollutant concentrations, and the feasibility of incorporating them into vertical flow treatment wetlands to increase the efficiency of these systems for the treatment of tequila stillage.

The textile industry often releases effluents into the environment without proper treatment or complete dye removal. Azo dyes, which are characterized by azo groups (―N═N―), are frequently used in the textile industry. Among the different wastewater treatment methods available, biological treatment has been extensively studied. The aim of the present study was to compare the biodegradation of the azo dye Direct Blue 71 by the fungi Phanerochaete chrysosporium and Aspergillus oryzae in paramorphogenic form using a 100 μg/ml dye solution. Biodegradation tests were performed within 240 h. The absorbance values obtained with UV-VIS spectrophotometry were used to determine the absorbance ratio and the percentage of dye discoloration following the biodegradation test. FTIR analysis allowed the identification of molecular compounds in the solution before and after biodegradation. Both A. oryzae and P. chrysosporium demonstrated considerable potential regarding the biodegradation of dyes in wastewater. These results may contribute toward improving effluent treatment systems in the textile industry.

Background, aim and scope Pulp and paper mills generate a plethora of pollutants depending upon the type of pulping process. Efforts to mitigate the environmental impact of such effluents have been made by developing more effective biological treatment systems in terms of biochemical oxygen demand, chemical oxygen demand, colour and lignin content. This study is the first that reports an evaluation of the effects of a tertiary treatment by fungi (Pleurotus sajor caju, Trametes versicolor and Phanerochaete chrysosporium and Rhizopus oryzae) on individual organic compounds of a Eucalyptus globulus bleached kraft pulp and paper mill final effluent after secondary treatment (final effluent). Material and methods The tertiary treatment with P. sajor caju, T. versicolor and P. chrysosporium and R. oryzae was performed in batch reactors, which were inoculated with separate fungi species and monitored throughout the incubation period. Samples from effluent after secondary and after tertiary treatment with fungi were analysed for both absorbance and organic compounds. The samples were extracted for organic compounds using solid-phase extraction (SPE) and analysed by gas chromatography-mass spectrometry (GC/MS). The efficiencies of the SPE procedure was evaluated by recovery tests. Results A total of 38 compounds (carboxylic acids, fatty alcohols, phenolic compounds and sterols) were identified and quantified in the E. globulus bleached kraft pulp mill final effluent after secondary treatment. Recoveries from the extraction procedure were between 98.2% and 99.9%. The four fungi species showed an adequate capacity to remove organic compounds and colour. Tertiary treatment with R. oryzae was able to remove 99% of organic compounds and to reduce absorbance on 47% (270 nm) and 74% (465 nm). P. sajor caju, T. versicolor and P. chrysosporium were able to remove 97%, 92% and 99% of organic compounds, respectively, and reduce 18% (270 nm) to 77% (465 nm), 39% (270 nm) to 58% (465 nm) and 31% (270 nm) to 10% (465 nm) of absorbance, respectively. Discussion The wide variety of organic compounds found in the final effluent must be due to the degradation of E. globulus wood in pulp and paper mill. The concentrations of organic compounds in the final effluent of E. globulus bleached kraft pulp mill were in residual levels maybe due to the secondary treatment. The recovery tests showed the effectiveness of the extraction procedure, and no losses of analyte were suspected in the analytical determinations. Lignin derivatives such as vanilic acid, syringic acid, guaiacol, syringol and phloroglucinol were totally removed by R. oryzae, but the 47% absorbance reduction obtained at 270 nm suggests that these species were not able to complete degradation of lignin macromolecular compounds. Conclusions The organic compounds (carboxylic acids, fatty alcohols, phenolic compounds and sterols) were removed more efficiently by tertiary treatment with R. oryzae or P. chrysosporium, followed by P. sajor caju and T. versicolor. Regarding the removal of both colour and organic compounds, the tertiary treatment with R. oryzae was the most efficient. Recommendations and perspectives In order to reduce the deleterious impacts of paper mill effluents, efforts have been made to develop more effective advanced tertiary treatments. This study may serve as a basis of characterisation, in terms of organic compounds of E. globulus bleached kraft pulp mill final effluent after secondary treatment and as an effort to understand the effects of tertiary treatments with fungi on low concentrations of organic compounds from biological secondary treatment.

In the present study, biodegradation of polycyclic aromatic hydrocarbons (PAHs) was examined using two fungal strains, namely P. chrysosporium and P. citrinum, isolated from locally contaminated soil. These two fungal strains were compared based on degradation properties under standardized conditions (pH 7.0, temperature 30oC, carbon source yeast extract) using PAH sole and a mixture of five different PAHs. In liquid media, PAH degradation was higher as compared to spiked soil by P. chrysosporium, followed by P. citrinum. In liquid culture, maximum degradation was 96.13% phenanathrene, 86.34% fluoranthene, 72.75% pyrene, 52.25% chrysene, and 40.16% benzo(a)pyrene by P. chrysosporium. PAH degradation in spiked soil was 78.5% phenanthrene, 65.91% fluoranthene, 61.73% pyrene, 48.2% chrysene, and 26.82% benzo(a)pyrene within 28 days by P. chrysosporium. Both local fungal isolates showed potential for degradation of PAHs alone and in PAH mixtures.

Biogas production from organic fraction of municipal solid waste (OFMSW) not only helps in solid waste management but also combat the food vs fuel dilemma. The presence of lignocellulosic material and other complex compounds in OFMSW hinder biogas production. Therefore, pretreatment is an essential step to increase the hydrolysis rate by converting complex compounds to simpler ones. This work was aimed at effective pretreatment of OFMSW by biological and thermo-chemical means. For biological pretreatment lignin degrading fungal strains, Phanerochaete chrysosporium and Pleurotus ostreatus were employed. Thermo-chemical treatment resulted in higher solubilisation yield in terms of sCOD and VFA making it a more effective method as compared with biological pretreatment. The optimisation of thermo-chemical pretreatment was done by the Box-Behnken design of response surface methodology (RSM). The interactive effect of influencing factors NaOH dose, temperature and time were studied on the response of sCOD, VFA and phenolic content. The sCOD and VFA values were significantly increased by increasing the NaOH concentration, temperature and time to a certain limit. The optimised condition from RSM for maximum solubilisation yield in terms of sCOD, VFA and phenolic content was found to be NaOH dose of 4.72 g/L, temperature 180 °C and time 30.3 min. Biogas production was increased by 169.5% after pretreatment at RSM optimised conditions as compared with untreated OFMSW.

Decolorization of six synthetic dyes and two raw textile effluents (A and B) by eight basidiomycetous fungi was investigated. Among eight basidiomycetous fungi, fungal isolate RCK-1 decolorized textile effluent A maximally (42%), while fungal isolate RCK-3 was found to decolorize more of Congo Red (69%), Xylidine Ponceau 2R (100%), Poly R-478 (96%), Indigo Carmine (99%), Lissamine Green B (90%), Toluidine Blue (57%) and textile effluent B (54%), than the rest of fungi. Percentage decolorization of all synthetic dyes and textile effluents by the new fungal isolates RCK-1 and RCK-3 was higher compared to the most widely studied simultaneous lignin degrader, Phanerochaete chrysosporium and selective lignin degrader, Pycnoporus cinnabarinus, when tested in liquid cultures. A statistically significant positive correlation between laccase production and decolorization of dyes and effluents was obtained as compared to other ligninolytic enzymes (lignin peroxidase and manganese peroxidase) production. This showed the importance of the differential contribution of the different ligninolytic enzymes towards the decolorization of the synthetic dyes and textile effluents. The substantially higher ligninolytic enzyme production by the fungal isolates RCK-1 and RCK-3 also suggested their potential use for textile effluent treatment and other possible biotechnological applications.

This study evaluated the reutilization of waste materials (scrap tires, sewage sludge, and wood chips) to remove volatile organic compounds (VOCs) benzene/toluene/ethylbenzene/xylenes/trichloroethylene/cis-1,2-dichloroethylene (BTEX/TCE/cis-DCE), plasticizer di(2-ethylhexyl) phthalate (DEHP), and pharmaceutically active compound carbamazepine from artificially contaminated water. Different hybrid removal processes were developed: (1) 300 mg/L BTEX + 20 mg/L TCE + 10 mg/L cis-DCE + tires + Pseudomonas sp.; (2) 250 mg/L toluene + sewage sludge biochar + Pseudomonas sp.; (3) 100 mg/L DEHP + tires + Acinetobacter sp.; and (4) 20 mg/L carbamazepine + wood chips + Phanerochaete chrysosporium. For the hybrid process (1), the removal of xylenes, TCE, and cis-DCE was enhanced, resulted from the contribution of both physical adsorption and biological immobilization removal. The hybrid process (2) was also superior for the removal of DEHP and required a shorter time (2 days) for the bioremoval. For the process (3), the biochar promoted the microbial immobilization on its surface and substantially enhanced/speed up the bioremoval of toluene. The fungal immobilization on wood chips in the hybrid process (4) also improved the carbamazepine removal considerably (removal efficiencies of 61.3 ± 0.6%) compared to the suspended system without wood chips (removal efficiencies of 34.4 ± 1.8%). These hybrid processes would not only be promising for the bioremediation of environmentally concerned contaminants but also reutilize waste materials as sorbents without any further treatment.

Aerobic biodegradation of 2,2′,4,4′-tetrabrominated diphenyl ether (BDE-47) by Phanerochaete chrysosporium in the presence of Cd²⁺ was investigated in this study. The results showed that P. chrysosporium could effectively degrade BDE-47, and its extracellular enzyme played an important role in the process of decomposition. BDE-47 biodegradation by fungi was more tolerant than extracellular enzyme in the presence of Cd²⁺. Also, both of the activity of two typical enzymes, MnP and LiP, descended with ascended Cd²⁺ concentration. Based on the four mono-hydroxylated PBDEs (5-OH-BDE-47, 4′-OH-BDE-17, 6-OH-BDE-47, and 2′-OH-BDE-28) and two bromophenols (2,4-DBP, 4-BP) detected, three possible degradation pathways were proposed, inferring that BDE-47 was more easily to transform via hydroxylation. With addition of Cd²⁺, the types of degradation products did not change, merely a variation of the content of these products observed. Meanwhile, the major metabolites of BDE-47, bromophenol compounds, have been found to be transformed or even mineralized by P. chrysosporium quickly, which also helped better explain why the amounts of BDE-47 decomposed did not match with that of the metabolites detected.

An investigation on the toxicological assessment of 10 choline chloride (ChCl)-based deep eutectic solvents (DESs) towards four fungi strains and Cyprinus carpio fish was conducted. ChCl was combined with materials from different chemical groups such as alcohols, sugars, acids and others to form DESs. The study was carried out on the individual DES components, their aqueous mixture before DES formation and their formed DESs. The agar disc diffusion method was followed to investigate their toxicity on four fungi strains selected as a model of eukaryotic microorganisms (Phanerochaete chrysosporium, Aspergillus niger, Lentinus tigrinus and Candida cylindracea). Among these DESs, ChCl:ZnCl₂ exhibited the highest inhibition zone diameter towards the tested fungi growth in vitro, followed by the acidic group (malonic acid and p-toluenesulfonic acid). Another study was conducted to test the acute toxicity and determine the lethal concentration at 50 % (LC₅₀) of the same DESs on C. carpio fish. The inhibition range and LC₅₀ of DESs were found to be different from their individual components. DESs were found to be less toxic than their mixture or individual components. The LC₅₀ of ChCl:MADES is much higher than that of ChCl:MAMᵢₓ. Moreover, the DESs acidic group showed a lower inhibition zone on fungi growth. Thus, DESs should be considered as new components with different physicochemical properties and toxicological profiles, and not merely compositions of compounds.

The search for novel microorganisms able to degrade olive mill wastewaters (OMW) and withstand the toxic effects of the initially high phenolic concentrations is of great scientific and industrial interest. In this work, the possibility of reducing the phenolic content of OMW using new isolates of fungal strains (Coriolopsis gallica, Bjerkandera adusta, Trametes versicolor, Trichoderma citrinoviride, Phanerochaete chrysosporium, Gloeophyllum trabeum, Trametes trogii, and Fusarium solani) was investigated. In vitro, all fungal isolates tested caused an outstanding decolorization of OMW. However, C. gallica gave the highest decolorization and dephenolization rates at 30 % v/v OMW dilution in water. Fungal growth in OMW medium was affected by several parameters including phenolic compound concentration, nitrogen source, and inoculum size. The optimal OMW medium for the removal of phenolics and color was with the OMW concentration (in percent)/[(NH₄)₂SO₄]/inoculum ratio of 30:6:3. Under these conditions, 90 and 85 % of the initial phenolic compounds and color were removed, respectively. High-pressure liquid chromatography analysis of extracts from treated and untreated OMW showed a clear and substantial reduction in phenolic compound concentrations. Phytotoxicity, assessed using radish (Raphanus sativus) seeds, indicated an increase in germination index of 23–92 % when a 30 % OMW concentration was treated with C. gallica in different dilutions (1/2, 1/4, and 1/8).