Seawater, sediments, and three genera of wild scleractinian corals were collected from four coral reef areas nearshore Liuqiu Island, southwestern Taiwan. Abundance, characteristics (sizes, colors, shapes, and polymer types), and enrichment of microplastics (MPs) in the corals, and their impacts on coral cover were determined. The average MPs abundances were 0.95, 0.77, and 0.36 item/g for Galaxea sp, Acropora spp, and Pocillopora sp, respectively. The MPs abundance was relatively higher on the coral surfaces than inside the skeletons, dominated by blue rayon-fibers, correspondingly observed in seawater and sediments. Large-size colorless MPs tended to be mis-ingested by Galaxea sp. (71%) compared with Pocillopora sp. (43%) and Acropora spp. (31%). The low hard coral cover (12.5%) observed at Yufu (L1) on the northeastern coastal zone nearby tourism center of Liuqiu Island where correspondingly associated with high MPs abundance in seawater (10 item/L), sediments (260 item/kg), and corals (0.60 item/g). Tourism induced sewage discharges and sailing activities significantly contributed to the MPs pollution, probably contributing to the loss of coral cover. High MPs enrichment in corals (EFMP = 25–283) shows that the marine MPs pollution can critically threaten coral reef ecosystems. Fibrous MPs present inside the coral skeleton serve as potential indicator of MPs’ impact on corals—with the dominance of textile-related rayon and polyester/PET microfibers in the coral reef zones. This study provided valuable information for coral conservation and coastal management.

As filter feeders, bivalve mollusks have a high potential risk of contamination by microplastics (MPs), which can be considered a transfer vector for humans through their consumption. Spatial-temporal differences in the MP concentration were evaluated in the cultured oyster Magallana gigas in Todos Santos Bay (TSB) and San Quintin Bay (SQB) during winter and summer (2019). MPs were found in all samples in both seasons, where microfibers were the most abundant particles observed. Only in winter, statistically significant differences were observed in the average concentration of ingested MPs between oysters from TSB and SQB. In each bay, the highest concentrations were observed during winter. Seasonal differences between MP concentrations were only found in TSB. During summer, the content of MPs was compared between the digestive system and the rest of the soft tissue in organisms from each site, and statistically significant differences were not observed, except by one site in SQB. Polymers were identified via μ-FTIR-ATR spectrometry. Polyester, polyacrylonitrile, and rayon were the most common plastics detected. However, due to the low concentration of MPs found in oysters, its consumption does not represent a risk to human health. Moreover, MP concentrations in organisms appear to respond to variables, such as temporality and the water circulation dynamics within the bays.

Microplastic pollution in estuarine and coastal environments has recently been characterised in several countries but few researchers have addressed the influence of different forms of coastal zone use on the distribution of microplastic. Here, microplastic particles were sampled in Hangzhou Bay, which is heavily influenced by a range of human activities, and their abundance, size, and polymer type characterised. The abundance of microplastics was 0.14 ± 0.12 items/m³ in water, 84.3 ± 56.6 items/kg dry weight of sediment, and between 0.25 ± 0.14 and 1.4 ± 0.37 items/individual in biota. These results show that Hangzhou Bay has a low level of microplastic contamination compared to other coastal systems in China, although abundance was spatially variable within the bay; relatively higher microplastic abundances were found in the southern area of the bay, which has adjacent industrial and urban land-use zones, while lower abundances were observed in the central and northern bay areas where mariculture, fisheries, and mineral and energy industries are most common. The relatively low microplastic abundance observed in the biota samples is consistent with the generally low values for the seawater and sediment samples. Pellets were the most common of four particle-shape classes (fibres, fragments, films, and pellets) in surface seawater, while fibres were most abundant in sediment and biota. Smaller-sized microplastics (<1.0 mm) were dominant in all samples. Microplastics in the surface seawater were dominated by low-density polypropylene and polyethylene particles, while rayon was dominant in the sediment and biota samples. Our results demonstrate that regional variability in anthropogenic activity and land-use are important controls on the spatial pattern of microplastic pollution in Hangzhou Bay.

Worldwide the seafloor has been recognized as a major sink for microplastics. However, currently nothing is known about the sediment microplastic pollution in the North Pacific sector of the Arctic Ocean. Here, we present the first record of microplastic contamination in the surface sediment from the northern Bering and Chukchi Seas. The microplastics were extracted by the density separation method from collected samples. Each particle was identified using the microscopic Fourier transform infrared spectroscopy (μFTIR). The abundances of microplastics in sediments from all sites ranged from not detected (ND) to 68.78 items/kg dry weight (DW) of sediment. The highest level of microplastic contamination in the sediment was detected from the Chukchi Sea. A negative correlation between microplastic abundance and water depth was observed. Polypropylene (PP) accounted for the largest proportion (51.5%) of the identified microplastic particles, followed by polyethylene terephthalate (PET) (35.2%) and rayon (13.3%). Fibers constituted the most common shape of plastic particles. The range of polymer types, physical shapes and spatial distribution characteristics of the microplastics suggest that water masses from the Pacific and local coastal inputs are possible sources for the microplastics found in the study area. In overall, our results highlight the global distribution of these anthropogenic pollutants and the importance of management action to reduce marine debris worldwide.

Microplastics and fibres occur in high concentrations along urban coastlines, but the occurrence of microplastic ingestion by fishes in these areas requires further investigation. Herein, the ingestion of debris (i.e., synthetic and natural fibres and synthetic fragments of various polymer types) by three benthic-foraging fish species Acanthopagrus australis (yellowfin bream), Mugil cephalus (sea mullet) and Gerres subfasciatus (silverbiddy) in Sydney Harbour, Australia has been quantified and chemically speciated by vibrational spectroscopy to identify the polymer type. Ingested debris were quantified using gut content analysis, and identified using attenuated total reflectance Fourier transform infrared (ATR-FTIR) and Raman microspectroscopies in combination with principal component analysis (PCA). The occurrence of debris ingestion at the time of sampling ranged from 21 to 64% for the three species, and the debris number ranged from 0.2 to 4.6 items per fish for the different species, with ∼53% of debris being microplastic. There was a significant difference in the amount of debris ingested among species; however, there was no difference among species when debris counts were standardised to fish weight or gut content weight, indicating that these species ingest a similar concentration of debris relative to their ingestion rate of other material. ATR-FTIR microspectroscopy successfully identified 72% of debris. Raman spectroscopy contributed an additional 1% of successful identification. In addition, PCA was used to non-subjectively classify the ATR-FTIR spectra resulting in the identification of an additional 9% of the debris. The most common microplastics found were polyester (PET), acrylic-polyester blend, and rayon (semi-synthetic) fibres. The potential of using Raman microspectroscopy for debris identification was investigated and provided additional information about the nature of the debris as well as the presence of specific dyes (and hence potential toxicity).

Microplastics are plastics that measure less than 5 mm in diameter. They enter the marine environment as primary sources directly from industrial uses, as well as secondary sources resulting from the degradation of large plastic debris. To improve the knowledge of microplastic pollution in China, we investigated samples from 53 estuarine sediment locations collected with a box corer within the Changjiang Estuary. Microplastics (<5 mm) were extracted from sediments by density separation, after which they were observed under a microscope and categorized according to shape, color and size. Identification was carried out using Micro-Fourier-Transform Infrared Spectroscopy (μ-FT-IR).The abundance of microplastics in the Changjiang Estuary was mapped. The mean concentration was 121 ± 9 items per kg of dry weight, varying from 20 to 340 items per kg of dry weight. It was found that the concentration of microplastics was the highest on the southeast coast of Shanghai. The distribution pattern of microplastics may be affected by the Changjiang diluted water in summer. All of the microplastics collected were categorized according to shape, color and size. Among which fiber (93%), transparent (42%) and small microplastics (<1 mm) (58%) were the most abundant types. No clear correlation between microplastics and the finer sediment fraction was found. Rayon, polyester, and acrylic were the most abundant types of microplastics identified, indicating that the main source of microplastics in the Changjiang Estuary was from washing clothes (the primary source). It is possible to compare microplastic abundance in this study with the results of other related studies using the same quantification method. The identification of microplastics raises the awareness of microplastic pollution from drainage systems. The prevalence of microplastic pollution calls for monitoring microplastics at a national scale on a regular basis.

Indoor airborne microplastics fibers (MPFs) are emerging contaminants of growing concern. Nowadays, air conditioners (ACs) are widely used in indoor environments. However, little is known about their impact on the distribution of indoor MPFs. In this study, we first disclosed the prevalence of MPF contamination in filters for indoor split ACs used in living rooms, dormitories, and offices. The average density of microfibers was 1.47–21.4 × 10² items/cm², and a total 27.7–35.0% of fibers were MPFs. Of these fibers, the majority were polyester (45.3%), rayon (27.8%), and cellophane (20.1%). We further tracked the long-term accumulation of MPFs on AC filters in three types of rooms, and demonstrated that dormitories showed relatively heavy accumulation especially after running for 35–42 days. Furthermore, we found that simulative AC filters which had been lined with PET MPFs could effectively release those MPFs into indoor air, propelling them away from the ACs at varying distances. Statistical analysis showed that the estimated daily intake of MPFs (5–5000 μm length) from AC filters would increase gradually with their usage, with the intake volume reaching up to 11.2 ± 2.2–44.0 ± 8.9 items/kg-BW/day by the 70th day, although this number varied among people of different ages. Altogether, these findings suggest that AC filters can act as both a sink and a source of microplastics fibers. Therefore, AC filters should be evaluated not only for their substantial impact on the distribution of indoor airborne MPFs, but also for their role in the prevalence of the related health risks.

Plastics are globally distributed in oceans and can pose a threat to the environment and organisms. In this study, plastic pollution in surface water and sediments of the Bohai Sea was assessed based on plastic abundance, distribution and characteristics (shape, polymer, size and color). Water and sediment samples were collected across the sea using a plankton net (330 μm) and a grab sampler, respectively. The following conclusions were reached. 1) In surface water, large plastics were less abundant (0.14 items/m³) and showed less diverse characteristics than microplastics (0.79 items/m³) but did not significantly differ in spatial distribution. 2) Microplastics in water were more abundant (1.95 items/m³) with more diverse characteristics in Liaodong Bay than in other regions of the sea (0.26–0.59 items/m³). Plastic waste from highly concentrated agricultural, industrial and fishery activities could make large contributions to microplastics in Liaodong Bay. Additionally, low hydrodynamics and long distance to Bohai Strait are unfavorable for diffusion of particles, facilitating the retention of microplastics and increasing the abundance in this bay. 3) Microplastics in sediments were smaller in terms of dominant sizes (<0.5 mm) with less diverse characteristics than particles in water (0.5–1.5 mm). Specifically, fragments, foams and lines dominated among the microplastics in water, whereas fibers and fragments were dominant particles in sediments; alkyd resin, polyethylene, polystyrene and polypropylene (PP) predominated among the particles in water, but rayon, cellulose and PP were dominant particles in sediments. 4) Neither abundance nor size of microplastics in the two media was proportionally correlated and showed low similarity indexes of polymer (0.16), shape (0.29) or color (0.38). This could be related to mismatch in spatiotemporal distributions and variations in the characteristics, fate and behavior of microplastics in the two media. The findings provide knowledge for tracing the sources of plastics in the Bohai Sea.

Microplastics can have several negative consequences on a variety of organisms, and their prevalence in marine ecosystems has become a major concern. Researchers have recently focused their attention on the world's largest gulf, the Gulf of Mexico (GoM), to determine and assess the impact of microplastic pollution on various environmental compartments (i.e., water, sediment, and biota). This paper critically reviews the analytical methodologies as well as summarizes the distribution, accumulation, sources, and composition of microplastics in a handful of studies (n = 14) conducted in the Gulf of Mexico (GoM) covering countries like the USA (n = 10) and Mexico (n = 4). Current quality control measures with respect to sampling and microplastic extraction are summarized. Of 14 studies reviewed, 47% primarily focused on examining sediments for microplastics, with biota and water comprising 35% and 18%, respectively. The abundance ranged from 31.7 to 1392 items m⁻² and 60–1940 items kg⁻¹ in sediment, 12–381 particles L⁻¹ in water, and 1.31–4.7 particles per fish in biota. Irregular shaped fragments were the most abundant, followed by fiber, film, foam, hard, and beads etc. Different polymer types of microplastics have been found, including polyethylene, polypropylene, polystyrene, polyamide, nylon, and rayon etc. According to published research, 46 out of 100 fish thriving in this region are susceptible to microplastic ingestion. Although microplastic concentration in the GoM is among the highest found worldwide, the determination of microplastic contamination is still a growing field of research and methodological discrepancies largely limit the realization of establishing a baseline information on the microplastic abundance of the GoM. In this respect, considerable efforts must be dedicated towards evaluating their distribution and exposure levels; thereby, major challenges and future research directions are briefly discussed.

This article has been retracted: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/about/our-business/policies/article-withdrawal).This article has been retracted at the request of the Editors-in-Chief and Authors. The corresponding author informed the journal that full permission had not been obtained to use all the samples documented in the study. The authors apologise for any inconvenience caused.