The potential leakage from marine CO2 storage sites is of increasing concern, but few studies have evaluated the probable adverse effects on marine organisms. Fish, one of the top predators in marine environments, should be an essential representative species used for water column toxicity testing in response to waterborne CO2 exposure. In the present study, we conducted fish life cycle toxicity tests to fully elucidate CO2 toxicity mechanism effects. We tested sub-lethal and lethal toxicities of elevated CO2 concentrations on marine medaka (Oryzias melastigma) at different developmental stages. At each developmental stage, the test species was exposed to varying concentrations of gaseous CO2 (control air, 5%, 10%, 20%, and 30%), with 96 h of exposure at 0–4 d (early stage), 4–8 d (middle stage), and 8–12 d (late stage). Sub-lethal and lethal effects, including early developmental delays, cardiac edema, tail abnormalities, abnormal pigmentation, and mortality were monitored daily during the 14 d exposure period. At the embryonic stage, significant sub-lethal and lethal effects were observed at pH < 6.30. Hypercapnia can cause long-term and/or delayed developmental embryonic problems, even after transfer back to clean seawater. At fish juvenile and adult stages, significant mortality was observed at pH < 5.70, indicating elevated CO2 exposure might cause various adverse effects, even during short-term exposure periods. It should be noted the early embryonic stage was found more sensitive to CO2 exposure than other developmental stages of the fish life cycle. Overall, the present study provided baseline information for potential adverse effects of high CO2 concentration exposure on fish developmental processes at different life cycle stages in marine ecosystems.

Mariculture activities including enclosure, raft and cage cultures employ a variety of plastic gear such as fishing nets, buoyant material and net cages. The plastic gear poses a potential source of microplastics to the coastal environment, but relevant data on the impacts of mariculture are still limited. To this end, a semi-enclosed narrow bay (i.e., Xiangshan Bay, China) with a long-term mariculture history was investigated to assess how mariculture activities affect microplastics in seawater and sediment. The results indicated that mariculture-derived microplastics accounted for approximately 55.7% and 36.8% of the microplastics in seawater and sediment, respectively. The average microplastic abundances of seawater and sediment were 8.9 ± 4.7 (mean ± SD, n = 18) items/m³ seawater and 1739 ± 2153 (n = 18) items/kg sediment, respectively. The types of mariculture-derived microplastics included polyethylene (PE) foam, PE nets, PE film, polypropylene (PP) rope, polystyrene (PS) foam and rubber. PE foam had the highest proportion (38.6%) in the seawater samples. High usage rates and the porous structure of PE foam led to the high abundance. The average microplastic sizes of seawater and sediment are 1.54 ± 1.53 mm and 1.33 ± 1.69 mm, respectively. The spatial variations in the abundance and size of microplastics implied that the mariculture-derived microplastics in Xiangshan Bay were transported along the Bay to the open sea. The results of this study indicate that mariculture activity can be a significant source of microplastics. Further research is required to investigate how the high microplastic abundance in mariculture zone affects marine organisms, especially cultured seafood.

During chlorine disinfection process, reactions between the disinfectant and 17β-estradiol (E2) lead to the formation of halogenated disinfection byproducts (DBPs) which can be a risk to both ecosystem and human health. The degradation and transformation products of E2 in sodium hypochlorite (NaClO) disinfection processes of different water samples were investigated. The reaction kinetics research showed that the degradation rates of E2 were considerably dependent on the initial pH value and the types of water samples. In fresh water, synthetic marine aquaculture water and seawater, the reaction rate constant was 0.133 min−1, 2.067 min−1 and 2.592 min−1, respectively. The reasons for the above phenomena may be due to the different concentrations of bromide ions (Br−) in these three water samples which could promote the reaction between NaClO and E2. Furthermore, Br− could also cause the formation of brominated DBPs (Br-DBPs). The main DBPs, reaction centers and conceivable reaction pathways were explored. Seven halogenated DBPs have been observed including three chlorinated DBPs (Cl-DBPs) and four Br-DBPs. The active sites of E2 were found to be the pentabasic cyclic ring and the ortho position of the phenol moiety as well as C9-C10 position. The identified Cl/Br-DBPs were also confirmed in actual marine aquaculture water from a shrimp pond. The comparison of bio-concentration factors (BCF) values based on calculation of EPI-suite showed that the toxicities of the Br-DBPs were stronger than that of their chloride analogues. The absorbable organic halogens (AOX) analysis also suggested that the DBPs produced in the marine aquaculture water were more toxic than that in the fresh water system.

The spatial distribution, chemical composition and ecological risk of 16 phthalate esters (PAEs) were investigated in the sea-surface microlayer (SML), seawater and sediment samples of the Bohai Sea (BS) and the Yellow Sea (YS). The concentration levels of the ΣPAEs spanned a range of 449–13441 ng L−1 in the SML, 453–5108 ng L−1 in seawater, and 1.24–15.8 mg kg−1 in the sediment samples, respectively, with diisobutyl phthalate (DiBP), di-n-butyl phthalate (DBP) and di-ethylhexyl phthalate (DEHP) as the dominant PAEs in both the water and sediment samples. The concentrations of ΣPAEs in the BS were higher than those in the YS. The vertical distribution of ΣPAEs in the water column showed that the concentrations were higher in the surface waters, but decreased slightly with depth, and started to increase at the bottom. Additionally, PAEs were significantly enriched in the SML, with an average enrichment factor of 1.46. The ecological risk of the PAEs was evaluated by the risk quotient (RQ) method, which indicated that DEHP posed a high risk to aquatic organisms in the whole water-phase, while the RQ values of DBP and DiBP reached a high risk levels in sedimentary environment.

Polar regions are fragile ecosystems threatened by both long-range pollution and local human contamination. In this context, the environmental distribution of the Personal Care Products (PCPs) represent a major knowledge gap. Following preliminary Antarctic studies, Fragrance Materials (FMs) were analyzed in the seawater and snow collected in the area of Ny-Ålesund, Svalbard, to investigate local and long-range contamination. Polycyclic Aromatic Hydrocarbons (PAHs), including Retene, were determined in parallel to help the identification of the governing processes. Concentrations of FMs up to 72 ng L⁻¹ were detected in the surface snow near the settlement and at increasing distances, in relation to the prevailing winds. PAHs follow a similar scheme, with levels of Retene up to 1.8 μg L⁻¹, likely deriving from the occurrence of this compound in the coal dust due to the previous mining activities in the area. The snow seasonal deposition of FMs and PAHs was estimated in a snowpit dug at the top of the Austre Brøggerbreen glacier, indicating the long-range atmospheric transport (LRAT) of these compounds.

Microplastics and antibiotics are two classes of emerging contaminants with proposed negative impacts to aqueous ecosystems. Adsorption of antibiotics on microplastics may result in their long-range transport and may cause compound combination effects. In this study, we investigated the adsorption of 5 antibiotics [sulfadiazine (SDZ), amoxicillin (AMX), tetracycline (TC), ciprofloxacin (CIP), and trimethoprim (TMP)] on 5 types of microplastics [polyethylene (PE), polystyrene (PS), polypropylene (PP), polyamide (PA), and polyvinyl chloride (PVC)] in the freshwater and seawater systems. Scanning Electron Microscope (SEM) and X-ray diffractometer (XRD) analysis revealed that microplastics have different surface characterizes and various degrees of crystalline. Adsorption isotherms demonstrated that PA had the strongest adsorption capacity for antibiotics with distribution coefficient (Kd) values ranged from 7.36 ± 0.257 to 756 ± 48.0 L kg−1 in the freshwater system, which can be attributed to its porous structure and hydrogen bonding. Relatively low adsorption capacity was observed on other four microplastics. The adsorption amounts of 5 antibiotics on PS, PE, PP, and PVC decreased in the order of CIP > AMX > TMP > SDZ > TC with Kf correlated positively with octanol-water partition coefficients (Log Kow). Comparing to freshwater system, adsorption capacity in seawater decreased significantly and no adsorption was observed for CIP and AMX. Our results indicated that commonly observed polyamide particles can serve as a carrier of antibiotics in the aquatic environment.

The bioaccumulative, persistent and toxic properties of long-chain perfluoroalkyl acids (PFAAs) resulted in strict regulations on PFAAs, especially in developed countries. Consequently, the industry manufacturing of PFAAs shifts from long-chain to short-chain. In order to better understand the pollution situation of PFAAs in marine environment under this new circumstance, the occurrence of 17 linear PFAAs was investigated in 30 surface seawater samples from the North Pacific to Arctic Ocean (123°E to 24°W, 32 to 82°N) during the sixth Chinese Arctic Expedition in 2014. Total concentrations of PFAAs (∑PFAAs) were between 346.9 pg per liter (pg/L) to 3045.3 pg/L. The average concentrations of ∑PFAAs decreased in the order of East China Sea (2791.4 pg/L, n = 2), Sea of Japan (East Sea) (832.8 pg/L, n = 6), Arctic Ocean (516.9 pg/L, n = 7), Chukchi Sea (505.2 pg/L, n = 4), Bering Sea (501.2 pg/L, n = 8) and Sea of Okhotsk (417.7 pg/L, n = 3). C4 to C9 perfluoroalkyl carboxylic acids (PFCAs) were detected in more than 80% of the surface water samples. Perfluorobutanoic acid (PFBA) was the most prevalent compound and perfluorooctanoic acid (PFOA) was the second abundant homolog. The concentration of individual PFAAs in the surface seawater of East China Sea was much higher than other sampling seas. As the spatial distribution of PFAAs in the marine environment was mainly influenced by the river inflow from the basin countries, which proved the large input from China. Furthermore, the marginal seas of China were found with the greatest burden of PFOA comparing the pollution level in surface seawater worldwide. PFBA concentration in the surrounding seas of China was also high, but distributed more evenly with an obvious increase in recent years. This large-scale monitoring survey will help the improvement and development of PFAAs regulations and management, where production shift should be taken into consideration.

Phthalate esters which are widely used as industrial chemicals have become widespread contaminants in the marine environment. However, little information is available on the interfacial behavior of phthalate esters in the seawater, where contaminants generally occur at elevated concentrations and have the potential to transfer into the atmosphere through wave breaking on sea surface. We used artificial seawater coated with fatty acids to simulate sea surface microlayer in a Langmuir trough. The interactions of saturated fatty acids (stearic acid (SA) and palmitic acid (PA)) with one of the most abundant phthalate esters (di-(2-ethylhexyl) phthalate (DEHP)), were investigated under artificial seawater and pure water conditions. Pure DEHP monolayer was not stable, while more stable mixed monolayers were formed by SA and DEHP on the artificial seawater at relatively low surface pressure. Sea salts in the subphase can lower the excess Gibbs free energy to form more stable mixed monolayer. Among the ten components in the sea salts, Ca²⁺ ions played the major role in condensation of mixed monolayer. The condensed characteristic of the mixed SA (or PA)/DEHP monolayers suggested that the hydrocarbon chains were ordered on artificial seawater. By means of infrared reflection-absorption spectroscopy (IRRAS), we found that multiple sea salt mixtures induced deprotonated forms of fatty acids at the air–water interface. Sea salts can improve the stability and lifetime of mixed fatty acid and phthalate ester monolayer on aqueous droplets in the atmosphere. Interfacial properties of mixed fatty acid and phthalate ester monolayers at the air–ocean interface are important to help understand their behavior and fate in the marine environment.