The present study tries to investigate the effect of composting process on some properties and heavy metals status of two municipal sewage sludge (MSS) as affected by three different organic bulking agents (BAs) at three levels (10%, 25%, and 45% V/V). According to the results, the composting process could reduce the fecal coliform to class A, a reduction more obvious in treatments with BAs than produced composts without them. Changes in the chemical properties of the composts vary according to the type of MSS and Bas. Based on the compost quality standard, most of the produced samples are classified in compost-class II. Examination of the total form of three heavy metals (HMs: Zn, Ni, Fe) of both MSS shows that composting process without BAs increases the HMs total concentration, but using of BAs have not been clear trends. In the contrary, BAs application reduced the available form of Fe and Ni, but increased the Zn available form. Examination of chemical forms of each studied HMs also shows that the composting process reduces the Ni and Fe mobility factor, but increases that of Zn. Generally, while, prepared composts can classify into the compost-class II, based on their properties, the high concentration of total Zn above the standard limit makes it extremely restrictive to be used as class II compost. However, according to EPA regulations, the composts with this concentration of Zn can be used as a relatively safe organic material on agricultural land.

Amendment with sewage sludge or biosolids can increase soil fertility but may also transfer biosolid-borne pollutants to the soil and the possible effects on the soil ecosystem are poorly understood, especially long-term effects. A long-term experiment was therefore established to assess the effects of repeated applications of different types of biosolids (fresh domestic, dried domestic and fresh industrial sludges) in field conditions. Nine years of sludge application led to changes in soil chemical and biological properties and generally contributed little to soil nutrient status. However, soil concentrations of potentially toxic elements (PTEs) were elevated by amendment, especially with industrial biosolids. Soil fauna are usually used to decipher the underlying effects of biosolid applications on the soil ecosystem. Here, collembolans (50.9%), nematodes (41.6%) and enchytraeid worms (7.50%) were collected and differentiated into different ecological and trophic groups and their body lengths and PTE concentrations in the body tissues were investigated. The animals showed different responses to the biosolids at population and individual levels. There were substantial changes in epigeic collembolan communities and bacterivorous nematodes increased significantly after biosolid amendment. Biosolid-borne PTEs were major factors and Redundancy (RDA) analysis indicates that collembolan communities were strongly influenced by zinc (Zn). The three groups of soil animals showed similar trends in accumulation of PTEs in the sequence cadmium (Cd) > Zn > copper (Cu), and the bioaccumulation factor (BAF) values of the PTEs were significantly higher in the industrial sludge treatment than in other two treatments with a similar trend of decreasing body length of nematodes. The results indicate that it is potentially risky to use industrial biosolids in the long term, and different species and ecological groups of collembolans and different trophic groups of nematodes should be examined when assessing soil health.

The widespread production and use of silver nanomaterials (AgNMs) in consumer and medical products have been raising environmental concerns. Once in the environment, the soil is one of the major sinks of AgNMs due to e.g. sewage sludge applications, and invertebrates are directly exposed. In this study, we investigate the potential of N-acetylcysteine (NAC) to reduce the toxic effects of Ag NM300 K (and AgNO3) on the soil invertebrate Enchytraeus crypticus. Ag NM300 K induces mortality, reproduction impairment, and avoidance. The addition of NAC to the soil showed a remarkable reduction in the toxicity of Ag, indicating that NAC can act as a detoxifying agent for terrestrial organisms exposed to Ag materials. That the reduction in toxicity likely is caused by thiol groups, was confirmed by GSH and GSSH studies. Identifying the mechanisms and hence alternatives that allow the recovery of contaminated soils is an important mitigation measure to promote environmental safety and reduce the associated risks to human health. Further, it may inform on strategies to implement in safe-by-design industry development.

To simultaneously achieve biological denitrification and bio-energy recovery from sludge, the effects of nitrite on the two-phase anaerobic digestion (AD) of waste activated sludge were explored. Herein, effects of nitrite on the acidogenic phase are optimized, and the corresponding influence mechanisms are investigated. The experimental results show that the optimal nitrite treatment conditions for improving the acidogenic phase are an initial pH of 8.0, a nitrite addition concentration of 500 mg NO₂⁻-N·L⁻¹, and a fermentation time of six days. By comparing the effects of nitrite and nitrate on the acidogenic phase, it was found that it was the nitrite, not the nitrate, that significantly enhanced the sludge organic solubilization, hydrolysis, and acidification, which are primarily attributed to the redox property of nitrite. Based on an analysis of different forms of soluble nitrogen concentrations, there was no obvious accumulation of nitrite or nitrate during the acidogenic phase. An analysis of the methane production and the volatile solid (VS) degradation during the two-phase AD revealed that the nitrite improved the methane production from the methanogenic phase and enhanced the VS degradation of sludge during the entire two-phase AD process. These findings could provide references for simultaneously treating nitrite-rich wastewater and improving anaerobic sludge digestion via two-phase system.

Soil pollution is growing at an alarming rate in today’s industrialized world as a result of increasing anthropogenic activities, either intentional (e.g., use of fertilizers and pesticides, irrigation with untreated wastewater, or land application of sewage sludge) or accidental (e.g., oil spills or leaching from landfills). Terrestrial soil pollution from transportation fuels such as Diesel or Biodiesel is inevitable as they are part of life’s necessities. Biodiesel is considered an environmental friendly fuel due to its non-hydrocarbon composition and low particulate matter emission. However, there are still some controversies regarding biodiesel environmental toxicity to terrestrial life. Little is known about the ecotoxicity of plant-based biodiesels to soil organisms. In the present study, three ecotoxicological tests including an earthworm (Eisenia fetida) 14-day soil toxicity test, a filter paper contact toxicity test, and a cocoon hatchability test were performed to examine the toxic effects of three plant-based biodiesels - safflower methyl ester (SaME), castor methyl ester (CME), and castor ethyl ester (CEE), with Diesel fuel. Unlike Diesel, the biodiesels were less toxic based on low earthworm mortality in the soil toxicity test. However significant morbidity responses (e.g., weight loss, coiling, posterior and anterior fragmentation, and excessive discharge of coelomic fluid) were observed in earthworms exposed to biodiesel. Further, in the cocoon hatchability test, biodiesels were equally toxic to Diesel at 2% and 5% soil concentrations, with no hatching success.

This work studied the occurrence of microplastics in primary and secondary effluents and mixed sludge of a WWTP as well as in processed heat-dried sludge marketed as soil amendment. Sampled microparticles were divided into fragments and fibres, the latter defined as those with cylindrical shape and length to diameter ratio >3. We showed the presence of 12 different anthropogenic polymers or groups of polymers with a predominance of polyethylene, polypropylene, polyester and acrylic fibres together with an important amount of manufactured natural fibres. The smaller sampled fraction, in the 25–104 μm range, was the largest in both primary and secondary effluents. Fibres displayed lower sizes than fragments and represented less than one third of the anthropogenic particles sampled in effluents but up to 84% of heat-dried sludge. The plant showed a high efficiency (>90%) in removing microplastics from wastewater. However, the amount of anthropogenic plastics debris in the 25 μm - 50 mm range still released with the effluent amounted to 12.8 ± 6.3 particles/L, representing 300 million plastic debris per day and an approximate load of microplastics of 350 particles/m³ in the receiving Henares River. WWTP mixed sludge contained 183 ± 84 particles/g while heat-dried sludge bore 165 ± 37 particles/g. The sludge of the WWTP sampled in this work, would disseminate 8 × 10¹¹ plastic particles per year if improperly managed. The agricultural use of sludge as soil amendment in the area of Madrid could spread up to 10¹³ microplastic particles in agricultural soils per year.

Silver (Ag) is released from a range of products and accumulates in agricultural soils as silver sulfide (Ag₂S) through the application of Ag-containing biosolids as a soil amendment. Although Ag₂S is comparatively stable, its solubility increases with salinity, potentially altering its impacts on microbial communities due to the anti-microbial properties of Ag. In this study, we investigated the impacts of Ag on the microbially mediated N cycle in saline soils by examining the relationship between the (bio)availability of Ag₂S and microbial functioning following the application of Ag₂S-containing sludge. Synchrotron-based X-ray absorption spectroscopy (XAS) revealed that the Ag₂S was stable within the soil, although extractable Ag concentrations increased up to 18-fold in soils with higher salinity. However, the extractable Ag accounted for <0.05% of the total Ag in all soils and had no impact on plant biomass or soil bacterial biomass. Interestingly, at high soil salinity, Ag₂S significantly increased cumulative N₂O emissions from 80.9 to 229.2 mg kg⁻¹ dry soil (by 180%) compared to the corresponding control sludge treatment, which was ascribed to the increased abundance of nitrification and denitrification-related genes (amoA, nxrB, narG, napA, nirS, and nosZ) and increased relative abundance of denitrifiers (Rhodanobacter, Salinimicrobium, and Zunongwangia). Together, our findings show that the application of Ag₂S-containing sludge to a saline soil can disrupt the N cycle and increase N₂O emissions from agroecosystems.

To understand the effect of reaction temperature on sulfur during hydrothermal carbonization (HTC) of sewage sludge (SS), seven group of temperature (180–300 °C) were chosen to investigate the distributions and evolution of sulfur-containing compounds in hydrochar and the liquid products. Elemental analysis, X-ray photoelectron spectroscopy (XPS), and X-Ray powder diffraction (XRD) were used to characterize the distribution of sulfur in hydrochar. The concentrations of sulfate ions and sulfide were determined in the liquid sample. The experimental results showed that as the temperature increased, the O/C ratio decreased because of the improved carbonization degree of SS. After hydrothermal carbonization, 90% of the sulfur in SS remained in hydrochar. As the temperature increased, the amount of sulfur in the liquid, mainly in the form of sulfate ions, tended to decrease. However, the experimental results for the gas phase were the opposite of the liquid phase.

Sludge is an inevitable by-product of municipal wastewater treatment processes, and its high moisture content poses a major challenge for its subsequent treatment and disposal. Previous studies have explored the effects of applying modified corn-core powder (MCCP) on dewatering sludge. Here, we characterized the effects of applying both MCCP and sludge-based biochar (SBB) on dewatering sludge. Analysis of the anti-shear ability of SBB revealed that SBB was a skeleton builder with high compressive strength, demonstrating that SBB could maintain the permeability of sludge under high-pressure filtration processes and facilitate the flow of bound water. Dissipative particle dynamics (DPD) was used to simulated the sludge flocculating process and verify the feasibility of the experiment. As the simulation progressed, the reaction in the sludge network reached equilibrium and the simulated structure of the sludge became loose. The dewatering performance and physicochemical properties of the treated sludge were studied to further characterize the effect of this combined technology. Compared with MCCP-sludge, MCCP&SBB-sludge, which was treated by 20% DS (mass of dry solids in sludge) of SBB and 20% DS of MCCP, achieved superior dewaterability. This combined method reduced the specific resistance of filtration by 76% and enlarged the net sludge solids yield by 138%. Further study of the properties of MCCP&SBB-sludge revealed a loose structure that resembled the structure recovered by the simulation, suggesting that the DPD simulation method simulated the sludge flocculating process successfully. Therefore, the combined application of MCCP and SBB was superior for sludge dewatering because of the synergistic effects of MCCP and SBB.

The presence of microplastics in the environment is currently receiving a lot of attention. Rubber particles from tire wear have been estimated in several mass emission inventories to be a major contributor to the total microplastic release. This work used dynamic probabilistic material flow analysis to quantify the flows of rubber particles from tires to roads and further onto soils and surface waters of Switzerland. The model considered the whole life-cycle of tires from import over the use phase to the end-of-life and the re-use of scrap tires. Uncertainties of model parameters and data variability were considered by using a probabilistic approach. Mass flows onto soils and through road drainage by both uncontrolled dispersal and engineered systems are considered. In addition, the release of rubber from artificial turfs was included. The accumulation of rubber particles in the environment was quantified over the time frame from 1988 to 2018. The results show that in 2018, 1.29 ± 0.45 kg/capita of rubber was emitted from tire wear (97%) and rubber granules (3%). Street cleaning and waste water treatment removed around 26% of this rubber mass before finally reaching the receiving environmental compartment, resulting in an effective input of 0.96 ± 0.35 kg/capita of rubber in 2018 into the natural environment. Most of this mass (74%) was deposited on roadside soils (up to 5 m distance from road), 22% flowed into surface waters and the remaining part (4%) was emitted to soils. The dynamic modeling showed an increase of the input into the environment by about 10% from 1990 to 2018. The ban of sewage sludge application on soils resulted in a marked decrease in the amount transferred to soils after the year 2000. In total, 219 ± 22 ktonnes of rubber particles have accumulated in the environment since 1988 in Switzerland.