In order to study the effect of cadmium ions on the mechanical properties and micro-structure characteristics of the red clay in Guilin, we have conducted triaxial test and the scanning electron microscope tests to analyze the effects of cadmium ion concentration and the number of dry and wet cycles on the mechanical properties and micro-structure changes of the red clay. The results showed the effects of cadmium ions and dry-wet cycles destroy the structure of red clay. The cohesive force of red clay decreases with the increase of cadmium ion concentration, and the internal friction angle first increases and then decreases. With the rise in the number of dry and wet cycles, the cohesive force of cadmium-contaminated red clay first increases and then decreases, and the angle of internal friction rises gradually. Under the action of different cadmium ion concentrations, the stress-strain curve is strain hardening. With the concentration of cadmium ions increases, the strain hardening becomes more apparent; the peak value reached faster. and the axial strain corresponding to the peak value of the line decreases. With the increase in the number of wet and dry cycles, the volume of cadmium-contaminated red clay shrinks and its compactness increases; it gets the peak shear strength faster during the shearing process, and its peak value becomes larger and larger. The main reason for the phenomenon is that cadmium ions destroy the cementation between the particles. The soil particles are mainly in point contact which loosens the structure of the soil; on the other hand, the thickness of the surface diffusion layer of the clay particles increases through chemical action, The exchange of cations increases the porosity of the soil and weakens its strength. The dry-wet cycle shrinks the volume of the red clay, and the soil particles are mainly in surface contact; as the number of dry-wet cycles increases, the soil particles connection is closer, the soil porosity decreases and the strength increases.

This paper reviews two important sources of innovation linked to the maritime environment and more importantly to ports: the potential coupling of sediment management and (bio)remediation. The detrimental effects of dredging are briefly considered, but the focus here is on a sustainable alternative method of managing the problem of siltation. This technique consists of fluidizing the sediment in situ, lowering the shear strength to maintain a navigable under-keel draught. Preliminary investigations show that through this mixing, aeration occurs, which results in a positive remediation effect as well. An overview of port contamination, remediation, and the recent research on aerobic (bio)degradation of port contaminants is made in order to show the potential for such innovative sediment management to reduce dredging need and remediate contaminated mud in ports. This review also highlights the lack of full-scale field applications for such potential remediation techniques, that remain largely confined to the laboratory scale.

The use of granular steelmaking slag as a substitute for natural sand in the construction of tidal flats was investigated. Using an intertidal flat simulator, we evaluated dephosphorization slag mixed with 8% by dry weight of dredged sediment (DPS+DS) as a basal medium for the growth of benthic macro- and microalgae in comparison with silica sand mixed with 8% dredged sediment (SS+DS). Species compositions of macro- and microalgae were distinctly different between DPS+DS and SS+DS. The mean dry weight of macroalgae on DPS+DS was three orders of magnitude higher than that on SS+DS. Sediment shear strength and pH were higher in DPS+DS than in SS+DS or in the sediment of natural tidal flats. These results suggest that DPS contributes to changing the sediment environment, thereby changing the algal composition compared to the composition on natural tidal flats.

Mechanical and biological treatment (MBT), which can be used for waste reduction and for the burning of methane from biological treatments to generate electricity and heating, has become a popular research topic in environmental geotechnical engineering. This study investigated the mechanical behaviour of MBT waste and the effects of different reinforcement contents and reinforcement scales on its shear strength characteristics, and 68 groups of MBT waste samples from the Hangzhou Tianziling landfill were tested in the laboratory with a direct shear test apparatus. The samples exhibited displacement hardening behaviour in their mechanical response. The results show that the content and scale of the reinforced materials in MBT waste play an important role in the strength characteristics of MBT waste, and graphs showing the variation of the MBT waste shear strength and shear strength parameters with different reinforcement contents and reinforcement scales are shown. The range of cohesion c is 6.0–12.0 kPa, and the internal friction angle φ is 15.6–26.6°, respectively. The results of this study provide a reference for the assessment of slope stability at MBT landfills.

Understanding the effect of acid rain to landslides is crucial for a better landslide risk assessment. This work aims to reveal the unsuspected but key role of acid rain in Panzhihua airport landslide, China. Firstly, we propose a hypothesis that acid rain may aggravate the slaking behavior of mudstone at weak interlayer and make it more fragmented, eventually further reducing its shear strength and predisposing the Panzhihua airport landslide. Subsequently, mudstone samples are subjected to slaking durability test, respectively, using water with a pH of 7 and two dilute hydrochloric acid solution with pH of 5 and 3. Slaking durability index (Idₙ) is adopted aiming to quantitatively evaluate the impact of acid rain on the slaking. Moreover, the mechanisms of acid rain affecting the slaking behavior of mudstone are revealed by (1) analyzing cation compositions changes in different pH slaking fluid and (2) observing micro-structure change of mudstone-chip before and after acid rain treatment. Finally, three works are conducted as evidences to prove that acid rain indeed plays a key role in the occurrence of Panzhihua airport landslide, including (1) analysis of the link between the slaking behavior of mudstone and its shear strength, (2) comparison of cations between spring water at the edge of the toe of landslide and acid rain, and (3) comparison of mineral contents of mudstone samples collected from different locations. These findings have implications for comprehensively analyzing the formation mechanism of landslide in acid rain area (such as Europe, North America, and China).

For safe disposal of wastes in landfills, compacted bentonite is recommended as bottom liners due to their significant cation exchange (CEC) and swelling capacity, low permeability and large specific surface area (SSA). The present investigation carried out various experimental studies determining the compressibility behaviour and unconfined compressive strength (UCS) of two different compacted bentonites in the presence of municipal solid waste (MSW) and synthetic MSW leachates. Various examinations were conducted determining alterations in consolidation parameters like the coefficient of consolidation (cᵥ), time taken for 90% consolidation (t₉₀) and compression index (Cc) with both leachates. The outcomes reveal that Cc and t₉₀ values of both bentonites declined; however, cᵥ value rose. Results also indicated that under any given consolidation pressure, a lesser void ratio was achieved for leachates. UCS of both bentonites reduced with leachates’ interaction yet, lying within the recommended a value higher than 200 kPa. A comparative assessment of the two bentonites displayed that bentonite having higher CEC and swelling capacity, and SSA unveiled more excellent Cc and t₉₀ values and a reduction in the UCS. A higher variation in behaviour of bentonites was perceived in the existence of MSW leachate in comparison to synthetic MSW leachate.

Mechanically and biologically treated (MBT) waste has significant characteristics such as high stability and low moisture content, which can reduce water, soil, and gas pollution in subsequent treatments. This pre-treatment method is environmentally friendly and sustainable and has become a popular research topic in the field of environmental geotechnical engineering. Using a direct shear test apparatus and five shearing rates (0.25, 1, 5, 10, and 20 mm/min), the shear strength characteristics of MBT waste at the Hangzhou Tianziling Landfill were studied. The results indicate the following: (1) With the increase in horizontal shear displacement, the shear stress of MBT waste gradually increases without a peak stress phenomenon, which is a displacement hardening curve; (2) the shear strength increases with an increase in the shearing displacement rate, and the sensitivity coefficient is 0.64–2.66; (3) a shear strength, shearing rate, and normal stress correlation model is established, and the model has a high degree of fit with the overall experimental data; (4) cohesion (c), internal friction angle (φ), and the logarithm of the shearing rate are linear; (5) the range of c of MBT waste is 22.32–39.51 kPa, and φ is 64.24–68.52°. Meanwhile, the test data are compared with the test data in the literature. The ranges of c and φ of municipal solid waste determined via the shear test are found to be wider than those of MBT waste. The results of this study can provide a reference for the stability calculation of MBT landfills.

The reinforcement strength characteristics of mechanically biologically treated (MBT) waste were studied by conducting consolidated undrained triaxial tests with MBT waste collected from the Hangzhou Tianziling landfill pilot project. In the tests, the effects of the reinforcement material used (geomembrane, geotextile, and geogrid) and the number of reinforcement layers used (one, two, and three layers) were assessed. The results showed the following: (1) even through the axial strain increases up to 25%, the deviator stress of MBT waste could not reach a well-defined peak; (2) the reinforcement effect is related to the type of reinforcement material, with geogrid exhibiting the best reinforcement effect and geomembrane the worst; (3) the strength ratio of reinforced MBT waste is related to the confining pressure and the number of reinforcement layers, with a greater strength ratio in the MBT waste attained with a lower confining pressure in a logarithmic relationship and a greater strength ratio in the MBT waste attained with a greater number of reinforcement layers in a linear relationship; (4) the reinforced MBT waste shear strength parameter variation ranges for the cohesion (c), internal friction angle (φ), effective cohesion (c′), and effective internal friction angle (φ′) are 3.92–13.69 kPa, 19°–29°, 10.10–27.94 kPa, and 24°–45°, respectively; and (5) the deviations in the test values from the apparent cohesion method and the semi-empirical formula method are less than 15%, indicating that these two theories of reinforced sand can also be applied to MBT waste. The results of this study are useful as a baseline reference for the stability assessment of MBT waste landfills.

Biochar has a great potential to sustainably improve the performance of bio-engineered slope due to its ability to retain water and to supply nutrients. Existing studies mainly focus on hydrological properties of biochar-amended soil. However, the effects of biochar on shear strength of soil are not well studied. This study aims to assess the shearing behaviour of biochar-amended completely decomposed granite (CDG). Soil specimens were prepared by mixing CDG with two types of biochar at a mass ratio of 5% and compacted at 95% of the maximum dry density. Although the peak shear strength of biochar-amended CDG is reduced by up to 20% because of lower initial dry density of the soil and crushing of biochar particles during shearing, both types of biochar have negligible effects on the ultimate shear strength, which is governed by friction between soil particles. This highlights that the ultimate friction angle can be adopted for designing bio-engineered slopes using biochar-amended soils.

The quality of plywood depends on factors such as the forest species and the adhesive used in their production, and understanding the interferences of these factors in the final properties of the plywood is of fundamental importance. The study aimed to develop multilayer plywood with two forest species and two types of adhesive and to evaluate the influences of these factors (forest species and adhesive) on the physical and mechanical properties of the plywood. The panels were produced with wood veneers of parica and pine with two types of adhesives, urea-formaldehyde and phenol-formaldehyde, with a weight of 150 g.m². Then, each set was pressed for 10 min under a specific pressure of 0.98 MPa at a temperature of 150 °C. Three panels were produced for each type of veneer and adhesive, totaling four treatments. The plywood was evaluated for physical properties (moisture content, bulk density, and water absorption) and mechanical properties (parallel and perpendicular static bending strength and shear strength). The results showed that the forest species had a greater influence on physical and mechanical properties, with the best results being observed for plywood produced with pine and PF adhesive. The specific mass of the panels should be considered as it positively influenced the mechanical properties and negatively impacted water absorption. The PCA was used to reduce the dimensionality of the data from 9 dependent variables to 2 main components, explaining 76.70% of the total variance of the data. The multivariate analyzes of the differentiated independent factors showed that both the species and the adhesive affected as properties of the plywood and both independent variables must be taken into account in the production of the plywood. It is concluded that the porosity and specific mass of the paricá veneers contributed to a greater penetration of the adhesives, resulting in lower physical and mechanical properties than the pine veneers. However, in general, it is concluded that the plywoods produced can be used for internal and external applications. However, it is not indicated for structural purposes as it did not meet the requirements of the NBR 31.000.001/2:2001.