Lead concentrations and their isotopic compositions were measured in lichen genera Cladonia and Usnea and fungi genus Trametes from the Greater Sydney region (New South Wales, Australia) that had been collected and archived over the past 120 years. The median lead concentrations were elevated in lichens and fungi prior to the introduction of leaded petrol (Cladonia 12.5 mg/kg; Usnea 15.6 mg/kg; Trametes 1.85 mg/kg) corresponding to early industrial development. During the period of leaded petrol use in Australian automobiles from 1932 to 2002, total median lead concentrations rose: Cladonia 18.8 mg/kg; Usnea 21.5 mg/kg; Trametes 4.3 mg/kg. Following the cessation of leaded petrol use, median total lead concentrations decreased sharply in the 2000s: Cladonia 4.8 mg/kg; Usnea 1.7 mg/kg. The lichen and fungi isotopic compositions reveal a significant decrease in ²⁰⁶Pb/²⁰⁷Pb ratios from the end of 19th century to the 1970s. The following decades were characterised by lower allowable levels of lead additive in fuel and the introduction of unleaded petrol in 1985. The environmental response to these regulatory changes was that lichen and fungi ²⁰⁶Pb/²⁰⁷Pb ratios increased, particularly from 1995 onwards. Although the lead isotope ratios of lichens continued to increase in the 2000s they do not return to pre-leaded petrol values. This demonstrates that historic leaded petrol emissions, inter alia other sources, remain a persistent source of anthropogenic contamination in the Greater Sydney region.

The concern with the environment and the depletion of natural resources has aroused the interest for the rational use and recycling of water. Therefore, this study evaluated the capacity of the Trametes sp. M3 isolate in the bioremediation of Reactive Blue (RB) 268 dye and its potential for use as an adsorbent in the treatment of textile effluents. In a solid medium containing RB 268, the discoloration rate was 1.00 and the growth rate was 1.4 cm/day. When evaluated in the in vivo biodiscoloration process, 100% of the dye lost its color after 120 h. The oxidative enzyme laccase was found in cultures containing the dye with high activity, indicating that it underwent induction. The chromatogram after cultivation of the fungus showed that there was a change in the structure of RB 268. The mycelium of the culture with the dye was analyzed by FTIR, pointing to an adsorption of RB 268 or its metabolites despite the absence of the color. In the biosorption, the best results were obtained when the mycelium was treated with HCl. The toxicity of the medium decreased after the cultivation of the fungus allowing the survival of the microcrustaceans in the acute toxicity bioassay.

In this work, the capacity of Trametes polyzona in degrading three textile dyes (amaranth, denim blue, and orange G) to three different concentrations (100, 150, and 200 mg/L) was evaluated. Two growth conditions were tested; in the first condition, the fungus was grown in a defined minimal medium with an initial glucose concentration of 10 g/L and adding the different concentrations of each of the dyes, and in the second condition, the same minimum medium was used but with a concentration of 3 g/L of glucose, after 7 days of fungus growth, at which time the glucose in the medium was completely consumed; each of the dyes was added at the three different concentrations. T. polyzona was able to decolorize the three dyes at the concentrations tested and a 200% increase in the decolorization rate was observed when the medium lacks glucose. Enzymatic activities of laccase, lignin peroxidase, and manganese peroxidase were detected; the enzyme laccase was the one that presented the greatest enzymatic activities in all the media tested. A simultaneous process of adsorption by the mycelium and degradation of extracellular enzymes was observed. A decrease of more than 90% COD was observed and the effluent generated showed no algal growth toxicity.

The rapid pace of economic development has resulted in the release of several polycyclic aromatic hydrocarbons (PAHs) into the environment. Microbial degradation using white-rot fungi is a promising method for the removal of PAHs from the environment. In the present study, biodegradation of recalcitrant PAH by a white-rot fungus, Trametes maxima IIPLC-32, was investigated using pyrene. The pyrene concentration decreased by 79.80%, 65.37%, and 56.37% within 16 days from the initial levels of 10 mg L⁻¹, 25 mg L⁻¹, and 50 mg L⁻¹, respectively. Gas chromatographic–mass spectrometric identification of prominent metabolites 1-hydroxypyrene, 2-methyl-1-naphthyl acetic acid, di-n-butyl phthalate, and diethyl phthalate helped in determining the pyrene degradation pathway. The presence of 81 extracellular proteins was revealed by secretome analysis. The identified proteins up-regulated in response to pyrene degradation were classified into detoxification proteins (6.12%), redox proteins (6.12%), stress proteins (4.08%), metabolic-related proteins (26.53%), translation and transcriptional proteins (49%), catalytic proteins (49%), and other proteins (8.16%). Knowledge of secretome analysis in pyrene degradation helped to understand the degradation mechanism of pyrene. Also, the study suggests that T. maxima IIPLC-32 has the potential to be used in the bioremediation of PAH contaminated aquatic environment.

The culture of Trametes gibbosa sp. white-rot fungi (WRF) 3 under mesophilic conditions can lead to the degradation of azo dye compounds. This ability of T. gibbosa sp. WRF 3 is attributed to the released enzymes that are able to catalyze the structural degradation of the azo dye compound. The effect of environmental factors such as carbon sources, nitrogen sources, and pH of growth medium were investigated in this research. The addition of 20 g/L glucose (carbon source) and yeast extract (nitrogen source) at pH 5 of growth medium enhanced the decolorization of Reactive Black 5 (RB5) dye up to 87.07 % within 30 days of incubation. The decolorization of RB5 can be analyzed using UV–vis spectroscopy and differential pulse cathodic stripping voltammetry (DPCSV). The maximum absorbance of RB5 was at 597 nm and decreased after the dye was treated with T. gibbosa sp. WRF 3. In the voltammetric analysis, we examined the effect of pH of Britton–Robinson buffer (BRB) medium on the detection of bis-azo compound of RB5. A stock solution of RB5 was used in the study, and it showed two reduction peak potentials at −0.5 and −0.7 V which attributed to the bis-azo bond, whereas the metabolic product showed one reduction peak at −0.6 V. The GC-MS mass spectrum confirmed the formation of metabolites at tR4.63 min and m/z of 73 after 30 days of incubation which was sec-butylamine.

Background, aim and scope Pulp and paper mills generate a plethora of pollutants depending upon the type of pulping process. Efforts to mitigate the environmental impact of such effluents have been made by developing more effective biological treatment systems in terms of biochemical oxygen demand, chemical oxygen demand, colour and lignin content. This study is the first that reports an evaluation of the effects of a tertiary treatment by fungi (Pleurotus sajor caju, Trametes versicolor and Phanerochaete chrysosporium and Rhizopus oryzae) on individual organic compounds of a Eucalyptus globulus bleached kraft pulp and paper mill final effluent after secondary treatment (final effluent). Material and methods The tertiary treatment with P. sajor caju, T. versicolor and P. chrysosporium and R. oryzae was performed in batch reactors, which were inoculated with separate fungi species and monitored throughout the incubation period. Samples from effluent after secondary and after tertiary treatment with fungi were analysed for both absorbance and organic compounds. The samples were extracted for organic compounds using solid-phase extraction (SPE) and analysed by gas chromatography-mass spectrometry (GC/MS). The efficiencies of the SPE procedure was evaluated by recovery tests. Results A total of 38 compounds (carboxylic acids, fatty alcohols, phenolic compounds and sterols) were identified and quantified in the E. globulus bleached kraft pulp mill final effluent after secondary treatment. Recoveries from the extraction procedure were between 98.2% and 99.9%. The four fungi species showed an adequate capacity to remove organic compounds and colour. Tertiary treatment with R. oryzae was able to remove 99% of organic compounds and to reduce absorbance on 47% (270 nm) and 74% (465 nm). P. sajor caju, T. versicolor and P. chrysosporium were able to remove 97%, 92% and 99% of organic compounds, respectively, and reduce 18% (270 nm) to 77% (465 nm), 39% (270 nm) to 58% (465 nm) and 31% (270 nm) to 10% (465 nm) of absorbance, respectively. Discussion The wide variety of organic compounds found in the final effluent must be due to the degradation of E. globulus wood in pulp and paper mill. The concentrations of organic compounds in the final effluent of E. globulus bleached kraft pulp mill were in residual levels maybe due to the secondary treatment. The recovery tests showed the effectiveness of the extraction procedure, and no losses of analyte were suspected in the analytical determinations. Lignin derivatives such as vanilic acid, syringic acid, guaiacol, syringol and phloroglucinol were totally removed by R. oryzae, but the 47% absorbance reduction obtained at 270 nm suggests that these species were not able to complete degradation of lignin macromolecular compounds. Conclusions The organic compounds (carboxylic acids, fatty alcohols, phenolic compounds and sterols) were removed more efficiently by tertiary treatment with R. oryzae or P. chrysosporium, followed by P. sajor caju and T. versicolor. Regarding the removal of both colour and organic compounds, the tertiary treatment with R. oryzae was the most efficient. Recommendations and perspectives In order to reduce the deleterious impacts of paper mill effluents, efforts have been made to develop more effective advanced tertiary treatments. This study may serve as a basis of characterisation, in terms of organic compounds of E. globulus bleached kraft pulp mill final effluent after secondary treatment and as an effort to understand the effects of tertiary treatments with fungi on low concentrations of organic compounds from biological secondary treatment.

The aim of this study was to determine the element content of wild edible and inedible mushroom species (Agaricus campestris, Armillaria ostoyae, Boletus reticulatus, Bondarzewia mesenterica, Bovistella utriformis, Cantharellus cibarius, Marasmius oreades, Megacollybia platyphylla, Meripilus giganteus, Neoboletus erythropus, Panellus stipticus, Phaeotremella foliacea, Pleurotus ostreatus, Podoscypha multizonata, Russula aurea, R. chloroides, R. virescens, T. versicolor, Trametes gibbose, and Trichaptum biforme) collected from the Belgrad Forests and the Ilgaz Mountain National Park. Based on the results of elemental analyses, daily metal intake (DMI) and health risk index (HRI) values of edible mushrooms collected from both localities were also calculated. As, Cd, Cr, Se, P, Hg, Cu, Mn, Fe, Zn, Al, Ca, Mg, and K contents of mushrooms were in the ranges of 0.16–3.45, 0.09–2.4, 0.15–2.34, 0.3–8.13, 0.28–11.44, 14.03–37.81, 3.87–108.57, 6.18–149.77, 11.9–776.1, 5.4–317.4, 7.4–355.2, 15.4–3517.3, 266.0–2500.0, and 628.0–24083.0 mg/kg dry weight, respectively. As a result of the DMI and HRI analyses, Cu concentration of B. utriformis (DMI: 46.53 μg/kg body weight/serving, HRI: 1.16) and Cd concentrations of A. campestris (DMI: 0.49 μg/kg body weight/serving, HRI: 1.36), A. ostoyae (DMI: 1.03 μg/kg body weight/serving, HRI: 2.86), B. utriformis (DMI: 0.52 μg/kg body weight/serving, HRI: 1.44), and P. ostreatus (DMI: 0.45 μg/kg body weight/serving, HRI: 1.24) were found to exceed the legal limits determined by authorities. It was concluded that the species collected from the regions in question should be consumed in a controlled manner.

The textile industry creates environmental problems due to the release of highly polluting effluents containing substances from different stages of dyeing that are resistant to light, water, and various chemicals, and most of them are difficult to decolorize because of its synthetic origin. The biological degradation of dyes is an economical and environmentally friendly alternative. The aim of this work was to use biofilms of basidiomycete fungi isolated from the Peruvian rainforest for the decolorization of synthetic reactive dyes, considering the advantages of these systems which include better contact with the surrounding medium, resistance to chemical and physical stress, and higher metabolic activity. Among several isolates, two were selected for their capacity of rapid decolorization of several dyes and their biofilm-forming ability. These strains were molecularly identified as Trametes polyzona LMB-TM5 and Ceriporia sp. LMB-TM1 and used in biofilm cultivation for the decolorization of six reactive dyes and textile effluents. Azo dyes were moderately decolorized by both strains, but Remazol Brilliant Blue R (anthraquinone) and Synozol Turquoise Blue HF-G (phthalocyanine) were highly decolorized (97 and 80 %, respectively) by T. polyzona LMB-TM5. Degradation products were found by HPLC analysis. Simulated effluents made of a mixture of six dyes were moderately decolorized by both strains, but a real textile effluent was highly (93 %) decolorized by T. polyzona LMB-TM5. In summary, T. polyzona LMB-TM5 was more efficient than Ceriporia sp. LMB-TM1 for the decolorization of textile dyes and effluents at high initial rates enabling the development of in-plant continuous biofilm processes.

Edible and medicinal macrofungi used in human diet represent not only important sources of nutritive elements but toxic substances as well (heavy metals and radionuclides). Radioactivity levels of four radionuclides (⁴⁰K, ¹³⁷Cs, ²²⁶Ra, ²²⁸Ra) were determined in the basidiomata (fruiting bodies of a Basidiomycetes) of six lignicolous (Fomitopsis pinicola, Ganoderma applanatum, Hericium clathroides, Megacollybia platyphylla, Pluteus cervinus, Trametes gibbosa) and three mycorrhizal (Boletus luridus, Boletus sp. 1, Boletus sp. 2) species as well as their soil (wood) substrates by gamma spectrometry (high-resolution high-purity germanium (HPGe) detector). The aim was to investigate their ability for radionuclide absorption according to transfer factors (from soil and wood), to predict potential bioindicator species as well as species with potential risk for human use. Samples were taken during years 2011 and 2012, at two sites in forest ecosystem of Tara Mountain (Serbia). Observed concentration ranges per dry weight were as follows: 29–3,020 Bq/kg (⁴⁰K), 21.9–735 Bq/kg (¹³⁷Cs), 3–39 Bq/kg (²²⁶Ra), and 2.0–18 Bq/kg (²²⁸Ra). Obtained results indicate that the type of basidiome (fleshy/tough), most likely due to a different metabolic rate, has a very important role in radionuclide accumulation. The highest activity concentrations of all analyzed radionuclides were found in species with fleshy basidiomata—P. cervinus, H. clathroides, M. platyphylla, and Boletus species. A species-specific influence on radionuclide uptake was more prominent comparing to habitat differences and the role of fungal trophic mode. No significant variations were observed regarding radionuclide activity among the same fungal species from different sampling sites.

Background, aim, and scope Olive oil mill wastewater (OOMW) environmental impacts minimization have been attempted by developing more effective processes, but no chemical or biological treatments were found to be totally effective to mitigate their impact on receiving systems. This work is the first that reports simultaneously the efficiency of three different approaches: biological treatment by two fungal species (Trametes versicolor or Pleurotus sajor caju), enzymatic treatment by laccase, and chemical treatment by photo-Fenton oxidation on phenols removal. Materials and methods Those treatments were performed on OOMW with or without phenol supplement (p-coumaric, vanillin, guaiacol, vanillic acid, or tyrosol). OOMW samples resulted from treatments were extracted for phenols using liquid-liquid extraction and analyzed by gas chromatography coupled to mass spectrometry. Results Treatment with T. versicolor or P. sajor caju were able to remove between 22% and 74% and between 8% and 76% of phenols, respectively. Treatment by laccase was able to reduce 4% to 70% of phenols whereas treatment by photo-Fenton oxidation was responsible for 100% phenols reduction. Discussion Range of phenol degradation was equivalent between T. versicolor, P. sajor caju and laccase for p-coumaric, guaiacol, caffeic acid, and tyrosol in supplemented OOMW, which enhances this enzyme role in the biological treatment promoted by these two species. Conclusions Phenols were removed more efficiently by photo-Fenton treatment than by biological or enzymatic treatments. Recommendations and perspectives Use of fungi, laccase, or photo-Fenton presents great potential for removing phenols from OOMW. This should be further assessed by increasing the application scale and the reactor configurations effect on the performance, besides a toxicity evaluation of treated wastewater in comparison to raw wastewater.