Biomarkers such as oxidase enzyme activity from flora exposed to chemicals in the water column and sediments have been widely used by ecotoxicologists to assess the quality of an environment. Biomarkers such as oxidase enzymes are especially useful indicators because they represent a direct biological response to environmental toxicity. A luminometer was used to quantify oxidase enzyme production in watercress (Nasturtium officinale) due to toxic chemical exposure of E85 (85% ethanol and 15% gasoline blend), gasoline, and 99% pure ethanol over a 72-h period in aquatic root exposure and volatile leaf exposure experiments. Aquatic exposure to E85 caused an increase in oxidative enzyme production while gasoline and ethanol caused no significant changes in oxidase concentrations. Aquatic root exposure results were compared to volatile leaf exposures where effects of E85, gasoline, and ethanol caused increases in oxidase production. Morphometric measurements were also conducted as plant stress comparisons to oxidative enzyme analyses. Measurements of root length showed increases in root growth at some concentrations of fuels with only the highest concentration of E85 resulting in a decrease in root growth when compared to the control.

Copper is an active component of some commercial algaecides and is commonly found in low concentrations in contaminated aquatic systems. Unintended consequences of algaecide application include macrophyte bioaccumulation and possible trophic level bioamplification especially by specialist herbivores. Trophic level effects of copper contamination were observed through feeding trials using the mustard beetle (Phaedon viridis). Several metals, including copper, interfere with the myrosinase enzyme system responsible for the watercress (Nasturtium officinale) allelopathic defense against herbivory. The mustard beetle is a specialist herbivore that has evolved a detection system that is stimulated by the products of the glucosinolate-myrosinase system. Because copper interferes with myrosinase enzymes, mustard beetles were expected to avoid copper-contaminated plants. While larvae exhibited a slight preference for contaminated plants, adult mustard beetles in this experiment exhibited a statistically significant preference for plants uncontaminated with copper.

This study deals with the toxicity of the treated solutions of two types of dyes, namely, the anthraquinonic Reactive Bleu 19 dye (RB19) and the bi-azoic Direct Red 227 dye (DR227), which are treated in single and binary mixture systems. The target molecules were removed by the photocatalysis process using ZnO as a catalyst, which was calcined at two temperatures 250 and 420 °C (ZnO₂₅₀ and ZnO₄₂₀) prepared in the lab by the one-step calcination method. XRD, TEM, EDX, XPS, FT-IR, BET, RAMAN, and EPR analyses were carried out to characterize the catalyst material. While the phytotoxicity was being conducted using watercress seeds, the cytotoxicity took place using a cell line (raw) and an intestinal cell (caco-2). The XRD analysis showed the partial calcination of ZnO₂₅₀ and the presence of anhydrous zinc acetate along with the ZnO nanoparticles (NPs). This result was not observed for ZnO₄₂₀. Despite the complete discoloration (100%) of all the final solutions, ZnO₂₅₀ exhibited a high cytotoxicity and phytotoxicity against the RB19 dye after the photocatalytic treatment; however, it was not the case of ZnO₄₂₀ which was selected as an eco-friendly photocatalyst for the degradation of organic dyes based on the results of removal efficiency, cytotoxicity, and phytotoxicity.

Plants of the order Brassicaceae have evolved a chemical defence against herbivory: the glucosinolate-myrosinase system. Mechanical damage to plant tissues, such as grazing, initiates the production of phenethyl isothiocyanate (PEITC), a compound toxic to invertebrates. Mechanical damage caused during biofumigation and the harvesting and washing of watercress presents routes for PEITC release into waterbodies, such as the chalk stream spawning sites of brown trout (Salmo trutta). This laboratory study exposed developing S. trutta embryos to PEITC at concentrations of 0.01, 0.1 and 1 μg/L. S. trutta exposed to 1 μg/L PEITC during embryonic development resulted in 100% mortality after four dose days. Exposure to 0.1 μg/L PEITC resulted in an approximate fourfold increase in mortality relative to the controls, while exposure to 0.01 μg/L PEITC had a negligible effect on embryo mortality. Embryos exposed to 0.1 μg/L PEITC showed a significant delay in hatching and produced alevins with significantly shorter total lengths, lighter body weights and an approximate threefold increase in spinal deformities relative to those exposed to the controls and 0.01 μg/L PEITC. The results of a motor activity assay demonstrate that alevins exposed to PEITC showed a significant decrease in swimming activity compared with control animals during periods of illumination. The increased mortality, teratogenic effects and impaired behaviour in S. trutta following embryonic exposure to relatively low concentrations of PEITC highlight a need to accurately quantify and monitor environmental levels of PEITC.

Pot experiment was conducted to evaluate the effect of two types of biochar (2% (w/w)), Pennisetum sinese Roxb biochar (PB) and coffee grounds biochar (CB), combined with iron fertilizer (1.3 g kg⁻¹ Fe) on the growth, quality, Cd/Pb accumulation in watercress, soil physicochemical properties, soil fertility, soil enzyme activities, and fraction distribution of Cd/Pb in soil. The results showed that the two types of biochar combined with iron fertilizer (BC-Fe) amendments could increase the shoot height, root length, plant biomass, soluble sugar and soluble protein of watercress, soil pH value, soil organic matter (SOM), ammonium nitrogen (NH₄⁺-N), available phosphorus, and available potassium. CB-Fe amendment enhanced soil urease, sucrose, and catalase activities, while PB-Fe amendment only enhanced soil urease activity among the three enzymes. The two BC-Fe amendments decreased exchangeable-Cd/Pb and reducible-Cd/Pb concentrations, while enhanced oxidizable-Cd/Pb and residual-Cd/Pb concentrations. Furthermore, the two BC-Fe amendments decreased significantly Cd and Pb accumulation in watercress root and shoot. The reduction rate for Cd and Pb in shoot by 42.9%, 20.0%, and 68.2%, 58.4% under PB-Fe and by 38.1%, 20%, and 62.5%, 48.8% under CB-Fe, respectively, for the first crop and the second crop. In conclusion, BC-Fe amendment could improve soil physicochemical properties and soil fertility, promote Cd and Pb transfer to the stable form, thus, reduce the bioavailability and mobility of Cd and Pb, and further, decrease Cd and Pb ecotoxicity and its accumulation in watercress and improve watercress quality.

Background, aim and scope In an alumina refinery, bauxite ore is treated with sodium hydroxide at high temperatures and pressures and for every tonne of alumina produced, about 2 tonnes of alkaline, saline bauxite processing waste is also produced. At Alcoa, a dry stacking system of disposal is used, and it is the sand fraction of the processing waste that is rehabilitated. There is little information available regarding the most appropriate amendments to add to the processing sand to aid in revegetation. The purpose of this study was to investigate how the addition of organic wastes (biosolids and poultry manure), in the presence or absence of added residue mud, would affect the properties of the residue sand and its suitability for revegetation. Materials and methods Samples of freshly deposited residue sand were collected from Alcoa's Kwinana refinery. Samples were treated with phosphogypsum (2% v/v), incubated, and leached. A laboratory experiment was then set up in which the two organic wastes were applied at 0 or the equivalent to 60 tonnes ha⁻¹ in combination with residue mud added at rates of 0%, 10% and 20% v/v. Samples were incubated for 8 weeks, after which, key chemical, physical and microbial properties of the residue sand were measured along with seed germination. Results and discussion Additions of residue mud increased exchangeable Na⁺, ESP and the pH, and HCO ₃ ⁻ and Na⁺ concentrations in saturation paste extracts. Additions of biosolids and poultry manure increased concentrations of extractable P, NH ₄ ⁺ , K, Mg, Cu, Zn, Mn and Fe. Addition of residue mud, in combination with organic wastes, caused a marked decrease in macroporosity and a concomitant increase in mesoporosity, available water holding capacity and the quantity of water held at field capacity. With increasing residue mud additions, the percentage of sample present as sand particles (<1 mm diameter) decreased, and the percentage present in aggregated form (>2 mm diameter) increased; greatest aggregation occurred where a combination of residue mud and poultry manure were added. Stability of aggregates, as measured by wet sieving, was greatest where poultry manure was applied. Although total organic C and soluble organic C were greater in biosolids than poultry manure treatments, the reverse was the case for microbial biomass C and basal respiration. In the biosolids and poultry manure treatments, increasing residue mud additions tended to increase soluble C, microbial biomass C and basal respiration. Germination index of watercress was highest in control samples and reduced by additions of biosolids and poultry manure which was attributed to the high EC and possibly high extractable P and NH ₄ ⁺ . Conclusions The concurrent addition of residue mud and organic wastes can improve chemical, microbial and particularly physical properties of residue sand. Future research should include neutralisation of the mud (e.g. with gypsum) and subsequent leaching to remove salts originating from both the mud and organic wastes.