The main goals of this study were (1) to standardize a simple and reliable embryotoxicity test for environmental contaminants and (2) to evaluate the presence and possible protective role of the multidrug resistance-associated (MRP) protein-mediated multixenobiotic defense in two Mediterranean sea urchin species, Paracentrotus lividus and Arbacia lixula. Toxic end-point used was the success of the first cell division in sea urchin embryos. Embryotoxicities of three environmentally relevant contaminants: mercuric chloride (HgCl2, 0.05–6 μM), trybutiltin (TBT, 2.5–500 nM), and oxybenzone (OXI, 0.1–100 μM); as well as seawater samples collected from the polluted and unpolluted locations, were determined and compared. A. lixula embryos were more sensitive to all three toxic compounds, and both P. lividus and A. lixula embryos were highly sensitive to TBT at nanomolar concentrations (EC50 49 ± 5 and 36.8 ± 3 nM, respectively). Inhibition of MRP protein by specific inhibitor MK571 caused significant increase in embryotoxic potency of HgCl2 (EC50 0.697 ± 0.03 and 0.245 ± 0.04 μM, respectively), TBT (EC50 24 ± 3 and 7.4 ± 1 nM, respectively) and polluted seawater sample, but not of OXI or unpolluted, natural seawater. Therefore, our results demonstrated for the first time the protective relevance of MRP proteins in early development of these two Mediterranean sea urchin species. Finally, the embryotoxicity protocol described in this study represents a simple and rapid bioassay for determination of environmentally relevant seawater contamination.

To date, numerous studies have employed single type nitrogen (N) addition methods in reporting influences of N deposition on soil extracellular enzymatic activities (EEA) during litter decomposition in forest ecosystems. As natural atmospheric N deposition is a set of complex compounds including inorganic N and organic N, it is essential for investigating responses of soil EEA to various mixed N fertilization. In a subtropical forest stand in Zijin Mountain, East China, various N fertilizers with different inorganic N and organic N ratios were added to soils monthly from 2008 to 2009. Samples were harvested from N fertilized and control plots every 4 months. Subsequently, six EEA were assayed. A laboratory experiment was also conducted simultaneously. Both field and laboratory experiments showed that various mixed N fertilizations revealed different influences on soil EEA. Acceleration of most soil EEA by mixed N fertilization was greater than that of single N fertilization. The majority of soil extracellular enzymes exhibited the highest activities under mixed N fertilization, with the ratio of inorganic N to organic N at 3:7. These results suggested that N type and ratio of inorganic N and organic N were important factors controlling soil EEA, and the 3:7 ratio of inorganic N and organic N may be the optimum for soil EEA.

Artemisia vulgaris (mugwort) is a tall (1.0–2.0 m) high biomass perennial herb which accumulates considerable amounts of metals on contaminated sites. An outdoor pot experiment was conducted on a sandy, slightly alkaline soil of moderate fertility to study the uptake of cadmium and the distribution of Cd in plant tissues of A. vulgaris. Cadmium was applied as CdCl2 (a total of 1 l solution of 0, 10, 50 and 100 mg Cd l−1) to 12-l pots with a height of 25 cm. HNO3- and water-extractable concentrations of Cd were correlated with the applied Cd at 2-cm soil depth, but were not correlated at 20-cm soil depth, suggesting that Cd was either not mobile in the soil or completely taken up by mugwort roots. The Cd concentrations in different organs of A. vulgaris and litter increased with increasing soil contamination. Leaf/soil concentration ratios (BCFs) up to 65.93 ± 32.26 were observed. Translocation of Cd to the aboveground organs was very high. The leaf/root Cd concentration ratio (translocation factor) ranged from 2.07 ± 0.56 to 2.37 ± 1.31; however, there was no correlation of translocation factors to Cd enrichment, indicating similar translocation upon different soil contamination levels. In summary, A. vulgaris is tolerant to the metal concentrations accumulated, has a high metal accumulating biomass and accumulates Cd up to about 70% in the aboveground parts. Both a high phytoextraction potential and a high value for phytostabilisation would recommend mugwort for phytoremediation.

Environmental constrains and anthropogenic changes can contribute simultaneously to the limitation of plant performance in Mediterranean urban areas. Photosynthetic efficiency of Quercus ilex L. leaves from the urban area of Naples was evaluated by comparison with leaves from remote site (Vesuvius National Park). The photosynthetic performance of leaves with different age (current year [CY], 1- [1Y] and 2-year old [2Y]) was assessed by measurements of gas exchange, chlorophyll fluorescence and pigment contents. The photosynthetic activity at the urban site was higher than that at the remote site for the CY leaves, while the opposite was observed for the 1Y and 2Y leaves. The growth of Q. ilex trees was mainly sustained by the CY leaves at the urban site, whereas at the remote site the photosynthetic activity was not affected by leaf ageing. In the urban environment, Q. ilex leaves strongly decreased the photosynthetic performance with leaf ageing as highlighted by leaf gas exchanges, although the photochemistry did not show any significant change. The mature leaves of urban site drove the reductive power deriving from the photochemistry more in non-assimilative processes rather than in carbon assimilative ones, avoiding a strong decrease of PSII photochemical efficiency.

Sediment cores were analysed from four coastal wetland sites within the Minas Basin, Bay of Fundy to compare mercury speciation and sediment characteristics. The coastal wetland sediments were low in total mercury (mean = 17.4 ± 9.9 ng g−1); however, MeHg concentration was 92 times higher (mean of 249 pg g−1) than intertidal mudflat sediment (mean of 2.7 pg g−1). Total mercury concentrations in intertidal mudflat cores were also low (0.5–23.7 ng g−1) and correlated (Pearson correlation = 0.98; p < 0.01) with % organic carbon; with low concentrations of MeHg present only below depths of 6 cm (mean = 2.7 ± 1.0 pg g−1). Total mercury concentrations were negatively correlated (correlation = 0.56, p < 0.05) with inorganic sulphur (acid volatile sulphides (AVS) and pyrite) while MeHg concentrations were inversely correlated (Pearson correlation = −0.68; p < 0.05) with the pyrite content but not with AVS. Methyl mercury concentrations were not significantly correlated with organic carbon content in the wetland sediments, and mercury-in-biomass enrichment factors were lower (total mercury mean 1.5 ± 1.9 and MeHg mean = 3.6 ± 4.8) than published measurements from mercury polluted sites. Modelling estimates found on average 4.4 times more total mercury mass in the intertidal mudflat sediments relative to vegetated wetlands. A negative relationship was observed between MeHg concentrations (below 20 cm depth) and modelled tidal inundation. The mineral fraction within wetland sediments contained 96.2% of the total mercury mass; however, the highest concentrations of mercury species were in root biomass. This research confirms that vegetated coastal wetlands are key areas for formation of bioavailable methyl mercury, and mercury distribution is tied to organic carbon and sulphur speciation.

Neutral starch microspheres (NSMs) were synthesized with epichlorohydrin as the cross-linking agent from soluble starch by inverse microemulsion method. Anionic starch microspheres (ASMs) were prepared from NSMs by the secondary polymerization with chloroacetic acid as the anionic etherifying agent. Scanning electron microscopy (SEM) revealed that microspheres had good sphericity and fine dispersibility, and the average particle size was about 75 μm. The adsorption procedure of Cu2+, Pb2+ on ASMs was carried out by batch experiments, Langmuir and Freundlich adsorption models were applied to describe the experimental isotherms, the adsorption equilibrium data were found to fit the Langmuir and Freundlich isotherm model, the Freundlich isotherm was more adequate than the Langmuir isotherm in simulating the adsorption isotherm of Cu2+,the adsorption of Cu2+, Pb2+ on ASMs was a spontaneous, the isosteric heat of adsorption at different adsorption levels was always negative and indicative of an exothermic process. The pseudo first- and second-order kinetic models were used to describe the kinetic data, and the rate constants were evaluated. The experimental data fitted well to the second-order kinetic model, which indicated that the chemical sorption was the rate-limiting step, instead of mass transfer.

The destruction of the surfactants, sodium dodecylbenzene sulfonate (DBS) and dodecyl pyridinium chloride (DPC), using an advanced oxidation process is described. The use of zero valent iron (ZVI) and hydrogen peroxide at pH = 2.5 (the advanced Fenton process), with and without, the application of 20 kHz ultrasound leads to extensive mineralisation of both materials as determined by total organic carbon (TOC) measurements. For DBS, merely stirring with ZVI and H2O2 at 20°C leads to a 51% decrease in TOC, but using 20 kHz ultrasound at 40°C, maintaining the pH at 2.5 throughout and adding extra amounts of ZVI and H2O2 during the degradation, then the extent of mineralisation of DBS is substantially increased to 93%. A similar result is seen for DPC where virtually no degradation occurs at 20°C, but if extra amounts of both ZVI and hydrogen peroxide are introduced during the reaction at 40°C and the pH is maintained at 2.5, then an 87% mineralisation of DPC is obtained. The slow latent remediation of both surfactants and the mechanism of degradation are also discussed.

Sediment profiles from ten excessively limed lakes were used to study the occurrence of lime residues as a result of incomplete lime dissolution and the influence of treatment with very high lime doses on the sequestration of metals in lake sediments. The sediment profiles were subjected to multi-element analysis and compared to sediment profiles from previous studies of lakes limed with normal lime doses and untreated reference lakes. The high lime doses were found to result in large lime residues in the sediment, with lime concentrations of up to 70% of the dry sediment in the studied lakes. Excessive liming, like liming with normal doses, was found to cause increased sequestration in sediments of, e.g. Cd, Co, Ni and Zn, metals where the mobility is known to be highly pH dependent, compared to non-limed reference lakes. No effect of liming on the sequestration of Cu, Cr, Pb and V could be shown. The size of the lime dose did not seem to influence the metal sequestration in the sediment, since no difference between the excessively limed lakes and lakes limed with normal doses was found. On the contrary, the large lime residues were found to cause a dilution of the metal concentrations in the sediments, since lime products used for lake liming generally have lower metal concentrations compared to the sediments.

Hydroponic and pot experiments were conducted to assess the uptake of heavy metals (Cd and Zn) by a common crop plant, African basil, Ocimum gratissimum. In addition, the effects of soil amendments, hydroxyapatite (HA) and cow manure on plant growth and metal accumulations were compared. In the hydroponic study, plants were exposed to various concentrations of Cd (2.5 and 5 mg L⁻¹) and Zn (10 and 20 mg L⁻¹) for 15 days. O. gratissimum was shown to be a Cd accumulator more than a Zn accumulator. Cadmium concentration in its shoots exceeded 100 mg kg⁻¹. In the pot experiments, soils from a heavily Cd-contaminated site (Cd 67.9 mg kg⁻¹ and Zn 2,886.8 mg kg⁻¹) were treated with cow manure and HA at the rates of 10% and 20% (w/w), and 0.75 and 1.5% (w/w), respectively. Plants were grown in the greenhouse for 3 months. The addition of cow manure resulted in the highest biomass production and the lowest accumulations of Cd in plant parts, while HA was more efficient than cow manure in reducing Zn uptake. Leaves of African basil showed a decreased Cd concentration from 1.5 to 0.3 mg kg⁻¹ (cow manure) and decreased Zn concentration from 69.3 to 34 mg kg⁻¹ (HA). This clearly demonstrates the efficiency of HA and cow manure in reducing metal content in leaves of plants grown on high metal-contaminated soil to acceptable or close to acceptable values (0.2 mg kg⁻¹ for Cd, 99.4 mg kg⁻¹ for Zn).

In the present investigation, treatment of metal cutting wastewater (MCW) using electrocoagulation (EC) process is designed and analyzed using response surface methodology (RSM). RSM is applied to optimize the operating variables viz. initial pH, current density, and operating time on the treatment of MCW in a batch mode by EC process using iron and aluminum electrodes. Quadratic models are developed for the responses such as chemical oxygen demand (COD), total organic carbon (TOC), and turbidity, and operating cost is calculated with respect to energy, electrode, and chemical consumptions. The actual COD, TOC, and turbidity removal efficiencies at optimized conditions are found to be 93.0%, 83.0%, and 99.8% for Fe electrode and 93.5%, 85.2%, and 99.9% for Al electrode, respectively, which agree well with the predicted response. The proposed model fits very well with the experimental data with R 2 adjusted correlation coefficients of 0.927 for COD, 0.924 for TOC, and 0.968 for turbidity removal for Al and 0.904 for COD, 0.976 for TOC, and 0.989 for turbidity removal for Fe electrodes, respectively. This study clearly shows that RSM is one of the suitable methods to optimize the operating conditions and maximize the COD, TOC, and turbidity removal efficiencies for both electrodes while keeping the operating costs to minimal (0.371 <euro>/m3 for Fe and 0.337 <euro>/m3 for Al electrodes).