Triclosan is one of the most frequently detected emerging contaminants in aquatic environment. In this study, we investigated the biouptake, toxicity and biotransformation of triclosan in freshwater algae Cymbella sp. The influence of humic acid, as a representative of dissolved organic matter, was also explored. Results from this study showed that triclosan was toxic to Cymbella sp. with 72 h EC₅₀ of 324.9 μg L⁻¹. Humic acid significantly reduced the toxicity and accumulation of triclosan in Cymbella sp. SEM analysis showed that Cymbella sp. were enormously damaged under 1 mg L⁻¹ triclosan exposure and repaired after the addition of 20 mg L⁻¹ humic acid. Triclosan can be significantly taken up by Cymbella sp. The toxicity of triclosan is related to bioaccumulated triclosan as the algal cell numbers decreased when intracellular triclosan increased. A total of 11 metabolites were identified in diatom cells and degradation pathways are proposed. Hydroxylation, methylation, dechlorination, amino acids conjunction and glucuronidation contributed to the transformative reactions of triclosan in Cymbella sp., producing biologically active products (e.g., methyl triclosan) and conjugation products (e.g., glucuronide or oxaloacetic acid conjugated triclosan), which may be included in the detoxification mechanism of triclosan.

The purpose of this pilot study was to test spider webs as a fast tool for magnetic biomonitoring of air pollution. The study involved the investigation of webs made by four types of spiders: Pholcus phalangioides (Pholcidae), Eratigena atrica and Agelena labirynthica (Agelenidae) and Linyphia triangularis (Linyphiidae). These webs were obtained from outdoor and indoor study sites. Compared to the clean reference webs, an increase was observed in the values of magnetic susceptibility in the webs sampled from both indoor and outdoor sites, which indicates contamination by anthropogenically produced pollution particles that contain ferrimagnetic iron minerals. This pilot study has demonstrated that spider webs are able to capture particulate matter in a manner that is equivalent to flora-based bioindicators applied to date (such as mosses, lichens, leaves). They also have additional advantages; for example, they can be generated in isolated clean habitats, and exposure can be monitored in indoor and outdoor locations, at any height and for any period of time. Moreover, webs are ubiquitous in an anthropogenic, heavily polluted environment, and they can be exposed throughout the year. As spider webs accumulate pollutants to which humans are exposed, they become a reliable source of information about the quality of the environment. Therefore, spider webs are recommended for magnetic biomonitoring of airborne pollution and for the assessment of the environment because they are non-destructive, low-cost, sensitive and efficient.

Water diversion has been increasingly applied to improve water quality in many water bodies. However, little is known regarding pollution by organic micropollutants (OMPs) in water diversion projects, especially at the supplier, and this pollution may threaten the quality of transferred water. In the present study, a total of 110 OMPs belonging to seven classes were investigated in water and sediment collected from a supplier of the Yangtze River within four water diversion projects. A total of 69 and 58 target OMPs were detected in water and sediment, respectively, at total concentrations reaching 1041.78 ng/L and 5942.24 ng/g dry weight (dw). Polycyclic aromatic hydrocarbons (PAHs) and pharmaceuticals were the predominant pollutants identified. When preliminarily compared with the pollution in the receiving water, the Yangtze River generally exhibited mild OMPs pollution and good water quality parameters, implying a clean water source in the water diversion project. However, in Zongyang and Fenghuangjing, PAHs pollution was more abundant than that in the corresponding receiving water in Chaohu Lake. Ammonia nitrogen pollution in the Wangyu River was comparable to that in Taihu Lake. These findings imply that water diversion may threaten receiving waters in some cases. In addition, the risks of all detected pollutants in both water and sediment were assessed. PAHs in water, especially phenanthrene and high-molecular-weight PAHs, posed high risks to invertebrates, followed by the risks to fish and algae. Pharmaceuticals, such as antibiotics and antidepressants, may also pose risks to algae and fish at a number of locations. To the best of our knowledge, this report is the first to describe OMPs pollution in water diversion projects, and the results provide a new perspective regarding the security of water diversion projects.

In this work, magnesium ferrite (MgFe₂O₄) nano-platelets with rich defects and abundant surface hydroxyl groups were synthesized, and used for the removal of low concentration As(V) in aqueous solution. Results from scanning electron microscopy (SEM) showed that the as-synthesized MgFe₂O₄ nano-platelets were consisted of many individual nanospheres. Rietveld refinement of X-ray diffraction (XRD) data indicated that the Mg²⁺ ions substituted the Fe³⁺ ions at both the octahedral and the tetrahedral sites of the crystal structure. Batch adsorption experiment showed that the equilibrium concentration of As(V) could be reduced down to 4.9 μg·L⁻¹ when the initial concentration of As(V) is 1 mg·L⁻¹, which complied with the drinking water standard of WHO (10 μg·L⁻¹). The adsorption capacity of synthesized MgFe₂O₄ towards As(V) was higher than commonly used iron oxide adsorbents (Fe₃O₄, γ-Fe₂O₃ and α-Fe₂O₃). Mechanistic studies proved that the superior adsorption capacity was attributed to: (1) increased amount of surface hydroxyl groups that resulted from the surface defects. (2) formation of tridentate hexanuclear surface complexes instead of bidentate binuclear complexes, and (3) formation of excess Mg-OH surface hydroxyl groups and As-Mg monodentate mononuclear surface complexes. This work disclosed the correlation of the superior As(V) adsorption ability with the surface hydroxyl groups in defective MgFe₂O₄, and propose MgFe₂O₄ as a potential candidate for the remediation of As-contaminated water.

A heterotrophic arsenite [As(III)]-oxidizing bacterium Agrobacterium tumefaciens GW4 isolated from As(III)-rich groundwater sediment showed high As(III) resistance and could oxidize As(III) to As(V). The As(III) oxidation could generate energy and enhance growth, and AioR was the regulator for As(III) oxidase. To determine the related metabolic pathways mediated by As(III) oxidation and whether AioR regulated other cellular responses to As(III), isobaric tags for relative and absolute quantitation (iTRAQ) was performed in four treatments, GW4 (+AsIII)/GW4 (-AsIII), GW4-ΔaioR (+AsIII)/GW4-ΔaioR (-AsIII), GW4-ΔaioR (-AsIII)/GW4 (-AsIII) and GW4-ΔaioR (+AsIII)/GW4 (+AsIII). A total of 41, 71, 82 and 168 differentially expressed proteins were identified, respectively. Using electrophoretic mobility shift assay (EMSA) and qRT-PCR, 12 genes/operons were found to interact with AioR. These results indicate that As(III) oxidation alters several cellular processes related to arsenite, such as As resistance (ars operon), phosphate (Pi) metabolism (pst/pho system), TCA cycle, cell wall/membrane, amino acid metabolism and motility/chemotaxis. In the wild type with As(III), TCA cycle flow is perturbed, and As(III) oxidation and fermentation are the main energy resources. However, when strain GW4-ΔaioR lost the ability of As(III) oxidation, the TCA cycle is the main way to generate energy. A regulatory cellular network controlled by AioR is constructed and shows that AioR is the main regulator for As(III) oxidation, besides, several other functions related to As(III) are regulated by AioR in parallel.

It is acknowledged that organohalide-respiring bacteria (OHRB) can degrade polybrominated diphenyl ethers (PBDEs); however, very little is known about the distribution of OHRB or their response to PBDE contamination in natural sediments. We collected sediments from 28 sampling sites in Taihu Lake, China, and investigated the spatial distribution and diversity of OHRB, and the relationships between the PBDE contamination levels and the PBDE removal potential. The abundances of five typical OHRB genera, namely Dehalobacter, Dehalococcoides, Dehalogenimonas, Desulfitobacterium, and Geobacter, ranged from 0.34 × 10⁴ to 19.4 × 10⁷ gene copies g⁻¹ dry sediment, and varied significantly among different areas of Taihu Lake. OHRB were more abundant in sediments from Meiliang and Zhushan Bay, where the PBDE concentrations were higher, and the phylotype diversity of the OHRB belonging to the family Dehalococcoidaceae was lower, than reported for other areas. While the sulfate concentrations explained much of the spatial distribution of OHRB, PBDE concentrations were also a strong influence on the abundance and diversity of OHRB in the sediments. For Dehalococcoides, Dehalogenimonas and Geobacter, the abundance of each genus was positively related to its own potential to remove PBDEs. The dominant OHRB genus, Dehalogenimonas, may contribute most to in situ bioremediation of PBDEs in Taihu Lake.

In China, the cadmium (Cd) levels in paddy fields have increased, which has led to the excessive uptake of Cd into rice grains. In this study, we determined the physicochemical properties of soil samples, including the pH, soil organic matter (SOM) content, cation exchange capacity (CEC), and total Cd content (Cdsoil) in order to establish a quadratic discriminant analysis (QDA) model for assessing the risk of Cd in rice and to calculate its prior probability. Decision tree and logistic regression models were also established for comparison. The results showed that the accuracy rate was 74% with QDA, which was significantly higher than that obtained using the decision tree (67%) and logistic regression (68%) models. The correlation coefficients between the soil pH and the other three factors (CEC, SOM, and Cdsoil) were higher in the inaccurate set than the accurate set, whereas the correlation coefficients were smaller in the inaccurate set than the accurate set.

Thallium (Tl) and its compounds are non-essential and highly toxic for living organisms, even at low concentrations. In this paper, we analyzed the presence and geochemical distribution of Tl in different mining-metallurgical and sediment samples collected from several mining zones of Mexico. A modified BCR sequential extraction procedure was also applied to the samples to investigate the geochemical behavior and potential environmental risk of Tl according to types of ore deposit and mineral processing method applied. Results revealed the presence of Tl in the majority of the mining-metallurgical samples, with labile concentrations reaching up to values of 184.4 mg kg⁻¹, well above the environmental standards. A comparison of Tl partitioning in different samples showed that Tl was usually found associated with labile fractions instead of entrapped in the environmentally-passive residual fraction. Specifically, high levels of Tl were extracted from the exchangeable/acid-extractable and poorly-crystalline reducible fractions, suggesting its association with both soluble and amorphous Fe-Mn oxyhydroxides, respectively. Besides, Tl was also frequently found associated with the crystalline reducible fraction, presumably bonded to manganese oxides and jarosite-like minerals. Lastly, little amounts of Tl were extracted from the oxidizable fraction. Considering the fractionation of Tl in these mining-metallurgical samples, they may pose a significant environmental hazard. This study provides useful insights into the potential sources of Tl pollution in Mexico and emphasizes the need for further research to determine the extent of its impact and to develop effective remediation protocols to protect the environment from Tl toxicity.

Environmental contamination by siloxanes is a matter of concern due to their widespread consumption in personal care as well as industrial products and potential toxicity. Nevertheless, methods for simultaneous determination of cyclic and linear siloxanes in sediment are lacking. In this study, we developed an optimized analytical method to determine cyclic and linear siloxanes based on gas chromatography coupled to tandem mass spectrometry (GC-MS/MS). This method was applied to determine concentrations of 19 siloxane compounds in surface and core sediments from industrialized bays in Korea to assess contamination status, spatial distribution, and historical trends. Total concentrations of siloxanes ranged from 15.0 to 11730 (mean: 712) ng/g dry weight, which were similar to or higher than those reported in other countries. The highest concentrations of siloxanes were found in rivers/streams that discharge into coastal waters and bays close to industrial complexes, indicating that industrial activities are major sources of siloxane contamination. Cyclic siloxanes such as D5 and D6 were predominant in surface and core sediments. A significant correlation existed between the concentrations of cyclic and linear siloxanes, suggesting similar sources in the marine coastal environment. The historical record of cyclic siloxanes in core sediments revealed a clear increasing trend since the 1970s. This finding is consistent with the history of local industrialization and global production of siloxanes. This is the first study of historical trends in siloxanes in the coastal environment.

Concentrations of particulate matter less than 1 μm, 2.5 μm, 10 μm and their contents of heavy metals were investigated in two different stations, urban and roadside at Algiers (Algeria). Sampling was conducted during two years by a high volume samplers (HVS) equipped with a cascade impactor at four levels stage, for one year sampling. The characterization of the heavy metals associated to the particulate matter (PM) was carried out by X-Ray Fluorescence analysis (XRF). The annual average concentration of PM1, PM2.5 and PM10 in both stations were 18.24, 32.23 and 60.01 μg m⁻³ respectively. The PM1, PM2.5 and PM10 concentrations in roadside varied from 13.46 to 25.59 μg m⁻³, 20.82–49.85 μg m⁻³ and 45.90–77.23 μg m⁻³ respectively. However in the urban station, the PM1, PM2.5 and PM10 concentrations varied from 10.45 to 26.24 μg m⁻³, 18.53–47.58 μg m⁻³ and 43.8–91.62 μg m⁻³. The heavy metals associated to the PM were confirmed by Scanning Electron Microscopy-Energy Dispersive X-Ray analyses (SEM-EDX). The different spots of PM2.5 analysis by SEM-EDX shows the presence of nineteen elements with anthropogenic and natural origins, within the heavy metal detected, the lead was found with maximum of 5% (weight percent). In order to determine the source contributions of PM levels at the two sampling sites sampling, principal compound analysis (PCA) was applied to the collected data. Statistical analysis confirmed anthropogenic source with traffic being a significant source and high contribution of natural emissions. At both sites, the PM2.5/PM10 ratio is lower than that usually recorded in developed countries. The study of the back-trajectories of the air masses starting from Sahara shows that desert dust influences the concentration and the composition of the PM measured in Algiers.