To clarify the relationship between the transport distance of spheroidal carbonaceous particles (SCPs) and particle size, we investigated the spatial distribution of SCP sizes in swimming pool deposits in the central Osaka Plain, central Japan. Median particle size of SCPs generally decreases with distance (0 to ∼20 km) downwind from the local coastal industrial area where SCP sources are distributed widely. This suggests that most SCPs found in the study area are derived from the industrial area. Samples with >40 % of particles >20 μm were predominantly collected within 2 km of the industrial area, while samples with >40 % of particles <10 μm were mostly collected over 10 km from the industrial area. Based on the results of our study and previous studies, we conclude that a higher proportion of particles of size >20 μm indicates that the origin of SCPs is within a few kilometres upwind of the sample site, whereas the presence of higher proportion of particles <10 μm indicates that their source is generally further than 10 km upwind. However, other factors may affect the size distribution of SCPs at a given location (e.g. fuel type, quality of the particle precipitator and topography of the terrain). Pool deposits provide more suitable samples than lake sediments for investigating atmospheric precipitation.

In this study, the effectiveness of subcritical water extraction (SCWE) was assessed by extracting four pesticides, namely diazinon, parathion, phenthoat, and EPN, from contaminated soil. The extraction efficiencies of different temperatures (25, 75, 100, 125, and 150 C); times (10, 20, 30, and 40 min); pressures (1, 2, and 3 MPa); and water flow rates (0.5, 0.7, 1.0, and 1.5 mL/min) were investigated. The optimum temperature, time, pressure, and flow rate were found to be 150 C, 20 min, 2 MPa, and 0.5 mL/min, respectively, in lab-scale. At this operating condition, the residual concentration of pesticide was less than 0.5 mg/kg, corresponding to an extraction efficiency of 99.9 %. The aim of this study was to also evaluate the removal efficiency on 30- and 167-fold scale-up extraction at optimum extraction condition obtained from lab-scale studies. The scale-up method considering constant ratio of the volume of water to soil mass was a feasible procedure. The results of our study suggest that SCWE is a promising option for effective disposal of pesticide- contaminated soil. © 2013 Springer Science+Business Media Dordrecht.

In theory, biological and physical clogging, induced as a result of potentially excessive formation of biomass from degradation of pollutants and retention of inert suspended fine particles, respectively, should result in a decrease of treatment performance. However, some wetlands are not prone to clogging in practice. The aim of this study was to compare the impact of different design (aggregate size) and operational (contact time, empty time and chemical oxygen demand [COD] loading) variables on the treatment efficiency and clogging processes. Different vertical-flow constructed wetlands were constructed and operated from June 2011 until June 2012. Data from June 2011 (setting-up period) were not used. The filter with the highest COD loading performed the worst in terms of outflow COD concentration (120 mg/l) but best in terms of COD load reduction (61 %). The wetland with the largest aggregate size had the lowest mean nitrate-nitrogen outflow concentration of 1.2 mg/l. However, the results were similar regardless of aggregate size (10 versus 20 mm) and resting time (24 versus 48 h) for most water quality variables. However, different COD inflow concentrations (COD of 146 mg/l versus COD of 312 mg/l) had a significant (p < 0.05) impact on the treatment performance for COD, ammonia-nitrogen, ortho-phosphate-phosphorus and suspended solids (SS). Serious clogging phenomena impacting negatively on the treatment performance were not observed for any columns. However, a small aggregate diameter, a short contact time, a long resting time and a low COD inflow concentration were most beneficial in reducing SS accumulation within the wetland filters. © 2013 Springer Science+Business Media Dordrecht.

Aquaculture wastewaters, with oleic acid (C18:1 ω9) as the most representative contaminant fatty acid, were used as inoculum to perform enrichment cultures in mineral medium in the presence of oleic acid as the sole carbon and energy source, allowing isolation of four bacterial strains named DG1a, DG2a, DG1b and DG2b. 16S rRNA gene sequencing analysis assigned the four isolates to the species Pseudomonas aeruginosa. Among the isolates, P. aeruginosa strain DG2a showed degradation of fatty acids, including oleic acid (C18:1 ω9). The hydrophobicity features were investigated in strain DG2a, and a constitutive hydrophobicity in the bacterial cells was highlighted. The capability to produce biosurfactants by cells of the bacterial strain P. aeruginosa strain DG2a was evidenced both in the presence of oleic acid and of aquaculture wastewaters by revealing emulsifying activity, oil spreading tests, haemolytic and cetyltrimethylammonium bromide agar tests. Bacterial cultures containing raw biosurfactant were added to native wastewaters, showing a depletion of the oleic acid content. The use of the isolated bacterial strain P. aeruginosa strain DG2a and of the produced biosurfactant in bioremediation of aquaculture wastewaters is proposed, and the valorization of aquaculture wastewaters as raw material for biosurfactant production by using the isolate is moreover suggested.

The potential risk of surface and groundwater contamination by the heavy metals and radionuclides leached from uranium waste-rock piles (UWRP) is a major environmental concern in the uranium-mining district of Northern Saskatchewan, Canada. The main objective of this study was to evaluate the nickel and uranium leaching behaviour in the UWRP lithological materials. In addition to the chemical characterization, these selected UWRP geomedia samples were also subjected to the sequential extraction procedure, availability test to quantify leaching potential and cumulative leaching test (CLT). Sequential extractions results demonstrated substantial observed differences in the Ni and U distribution patterns among various operationally defined geochemical fractions. A large fraction of total Ni concentration was associated with non-labile residual fraction while U was mainly present in the labile fractions. The observed labile Ni and U concentrations also remained relatively high in the gneissic basement materials and underlying organic-rich lake sediment. In case of basement materials, both Ni and U concentrations in solution with the first CLT fraction exceeds their maximum permissible levels in both surface and groundwater. Leaching test results confirmed that Ni and U leachability depends on their total content distribution in various solid phase fractions, and several geochemical processes are controlling the solubility of Ni and U geochemical phases in the UWRP. Our experimental data suggest the potential for a long-term risk to surface and groundwater contamination from these UWRP.

Bisphenol-A (BPA) is an environmental contaminant used in the manufacturing of polycarbonate plastics and epoxy resins, which has been discovered in freshwater systemsworldwide as a result of effluent from manufacturing. This bioactive molecule is an estrogen mimic and has become a concern for exposure, especially during development, resulting in its removal from baby bottles and other consumer products. BPA is an endocrine disruptor in a variety of species and has been classified as a toxic substance in multiple countries. In this study, we examined the effect of BPA exposure on leukocyte counts in wild yellow perch, Perca flavescens. Yellow perch were exposed to either 2, 4, and 8 ppb BPA; Saprolegnia; or a blank control for a period of 7 days. Leukocyte blood counts were significantly higher in Saprolegnia, 4 ppb BPA, and 8 ppb BPA treatments compared to control. To test compound effects of BPA and Saprolegnia on leukocyte counts over a 7-day period, perch were exposed to either 4 ppb BPA, 4 ppb BPA+Saprolegnia, or control. Leukocyte counts were significantly higher in the 4 ppb BPA treatment relative to control. The 4 ppb BPA+Saprolegnia treatment was numerically elevated from the control, exhibiting a 153 % increase relative to control. BPA represents a contaminant with immunomodulatory properties that remain to be determined. © Springer Science+Business Media Dordrecht 2013.

The photocatalytic degradation effectiveness of six selected typical phytotoxic substances (ferulic, benzoic, gallic, salicylic, tannic, and acetic acid) by two levels of 10 nm TiO₂ (11 and 22 g/m²) immobilized on tiles under 254 nm of UV light irradiation was investigated. The results showed that the immobilized nano-TiO₂ significantly degraded all phytotoxic substances dissolved in distilled water, and the cumulative degradation rates of ferulic, benzoic, gallic, salicylic, tannic, and acetic acid reached 22.2, 33.6, 48.2, 56.9, 57.5, and 76.0 % after 6 h of treatment, respectively. Furthermore, the cumulative degradation rates of six phytotoxic substances by immobilized nano-TiO₂ were different remarkably, i.e., salicylic acid > benzoic acid, gallic acid > ferulic acid, acetic acid > tannic acid. The maximal photocatalytic degradation efficiencies of all phytotoxic substances appeared at the first 2 h in the three experiments. During the 6-h treatment period, the photocatalytic degradation efficiency of all phytotoxic substances decreased gradually. There was no significant difference in the photocatalytic degradation of benzoic acid and ferulic acid between the two levels of immobilized nano-TiO₂ treatments, whereas a significant difference was found in the photocatalytic degradation of salicylic acid, gallic acid, tannic acid, and acetic acid. In a word, nano-TiO₂ photocatalysis is an effective method to degrade phytotoxic substances. And the photocatalytic degradation effectiveness of six typical phytotoxic substances may be related to their structures.

Cr(VI) adsorption from aqueous solutions on peanut husk modified with formaldehyde (PeH-F) and peanut husk modified with formaldehyde and Fe (PeH-FFe) was evaluated as a function of shaking time, initial pH, chromium concentration, and temperature. Results showed that the Cr(VI) is preferentially adsorbed by PeH-FFe at pH 2 than pH 6. It also was found that the chromate equilibrium sorption capacity for PeH-FFe is at least six times higher than for PeH-F. The optimum pH to remove chromium is 2 for both materials; however, PeH-FFe has a higher efficiency for the chromium removal. Finally, Cr(VI) adsorption also depends on chromium concentration and temperature. The adsorption data as a function of concentration obey Linear, Freundlich, and Langmuir isotherms at pH 2 and 6. The Cr(VI) maximum capacity of PeH-FFe at pH 2 was 33.11 mg Cr(VI)/g, slightly higher than that at pH 6 (31.75 mg Cr(VI)/g). The linear isotherm shows that the pH affect the Cr(VI) distribution into the aqueous/solid phases. The negative value of ΔH and positive values of ΔG indicate that the chromium adsorption process is an exothermic and non-spontaneous process. The characterization of the peanut husk modified with formaldehyde and peanut husk modified with formaldehyde and Fe by scanning electron microscopy, Raman, and IR spectroscopies as well as the textural characteristics of the no-living biomasses were also considered in this work. © 2013 Springer Science+Business Media Dordrecht.

Although concentrations of endocrine-disrupting chemicals (EDCs) in seawaters of Japan are relatively low, vitellogenin and ovotestis inductions are still being observed in some males of mullet and flounder collected in coastal areas. These fish species are benthic and could be affected by EDCs in marine sediments. Therefore, the concentrations of EDCs in marine sediments of Osaka Bay were determined by LC-MS/MS. In addition, the estrogen receptor binding potencies as estrogenic potencies of these sediments were assessed by the medaka estrogen receptor-α binding assay. Results show that estrogenic potencies were higher in sediments of the inner part of the bay especially at station 13 (off Sakai City) where quite strong estrogenic potency was detected. Through calculation of total E2 equivalent concentration (EEQ) in sediments, it was established that approximately 50 % of estrogenic potency was due to nonylphenol (NP), estrone and 17β-estradiol, suggesting that these compounds play important roles as endocrine disruptors in coastal environments of Osaka Bay.

Petroleum hydrocarbon contamination of soil is an emerging environmental threat on the Earth due to possible toxic impact on different ecological receptors. The present study was mainly carried out to evaluate the phytotoxicity of long-term total petroleum hydrocarbon-contaminated soils by the toxicity end points obtained from three plant species Zea mays, Lactuca sativa L., and Cucumis sativus. The tested soil exerted phytotoxicity for all the evaluated end points of plants with dose-dependent relationship. The determined IC₅₀ indicates inhibition in root elongation as the most sensitive toxicity end point for L. sativa L., while inhibition in cross-section area of meristematic zone as the most susceptible and inhibition in seed germination as the least susceptible end points for both Z. mays and C. sativus. The tested root morphometric parameters confirm their applicability as novel toxicity end points. In addition, microcalorimetric analysis confirmed the applicability of inhibition in metabolic heat emission rate as a toxicity end point. Microcalorimetry can be applied to determine the exerted phytotoxic effect on seedlings. The present combined approach concludes that the phytotoxicity of the tested soil is species-specific and varies as follows: Z. mays < C. sativus < L. sativa L. The findings of this study may have implications in planning comprehensive phytotoxicity assessment for hydrocarbon-contaminated soils or screening plant species for phytoremediation program.