The distribution characteristics and potential sources of polybrominated diphenyl ethers (PBDEs) and alternative brominated flame retardants (aBFRs) were investigated in 54 surface sediment samples from four bays (Taozi Bay, Sishili Bay, Dalian Bay, and Jiaozhou Bay) of North China's Yellow Sea. Of the 54 samples studied, 51 were collected from within the four bays and 3 were from rivers emptying into Jiaozhou Bay. Decabromodiphenylethane (DBDPE) was the predominant flame retardant found, and concentration ranged from 0.16 to 39.7 ng g−1 dw and 1.13–49.9 ng g−1 dw in coastal and riverine sediments, respectively; these levels were followed by those of BDE 209, and its concentrations ranged from n.d. to 10.2 ng g−1 dw and 0.05–7.82 ng g−1 dw in coastal and riverine sediments, respectively. The levels of DBDPE exceeded those of decabromodiphenyl ether (BDE 209) in most of the samples in the study region, whereas the ratio of DBDPE/BDE 209 varied among the four bays. This is indicative of different usage patterns of brominated flame retardants (BFRs) and also different hydrodynamic conditions among these bay areas. The spatial distribution and composition profile analysis indicated that BFRs in Jiaozhou Bay and Dalian Bay were mainly from local sources, whereas transport from Laizhou Bay by coastal currents was the major source of BFRs in Taozi Bay and Sishili Bay. Both the ∑PBDEs and ∑aBFRs (sum of pentabromotoluene (PBT), 2,3-diphenylpropyl-2,4,6-tribromophenyl ether (DPTE), pentabromoethylbenzene (PBEB), and hexabromobenzene (HBB)) were at low concentrations in all the sediments. This is probably attributable to a combination of factors such as low regional usage of these products, atmospheric deposition patterns, coastal currents transportation patterns, and degradation processes for higher BDE congeners. This paper is the first study that has investigated the levels of DBDPE in the coastal sediments of China's Yellow Sea.

The number of products containing engineered nanomaterials (ENMs) has increased due to their high industrial relevance as well as their use in diverse consumer products. At the end of their life cycle ENMs might be released to the environment and therefore concerns arise regarding their environmental impact. In order to track their fate upon disposal, it is crucial to establish methods to trace ENMs in complex environmental samples and to differentiate them from naturally-occurring nanoparticles. The goal of this study was to distinctively trace ENMs by (non-invasive) detection methods. For this, fluorescent ENMs, namely quantum dots (QDs), were distinctively traced in complex aqueous matrices, and were still detectable after a period of two months using fluorescence spectroscopy. In particular, two water-dispersible QD-species, namely CdTe/CdS QDs with N-acetyl-l-cysteine as capping agent (NAC-QDs) and surfactant-stabilized CdSe/ZnS QDs (Brij®58-QDs), were synthesized to examine their environmental fate during disposal as well as their potential interaction with naturally-occurring substances present in landfill leachates. When QDs were spiked into a leachate from an old landfill site, alteration processes, such as sorption, aggregation, agglomeration, and interactions with dissolved organic carbon (DOC), led to modifications of the optical properties of QDs. The spectral signatures of NAC-QDs deteriorated depending on residence time and storage temperature, while Brij®58-QDs retained their photoluminescence fingerprints, indicating their high colloidal stability. The observed change in photoluminescence intensity was mainly caused by DOC-interaction and association with complexing agents, such as fulvic or humic acids, typically present in mature landfill leachates. For both QD-species, the results also indicated that pH of the leachate had no significant impact on their optical properties. As a result, the unique spectroscopic fingerprints of QDs, specifically surfactant-stabilized QDs, allowed distinctive tracing in complex aqueous waste matrices in order to study their long-term behavior and ultimate fate.

Tetrabromobisphenol A (TBBPA) is the brominated flame retardant with the highest production volume and its bioaccumulation in environment has caused both human health and environmental concerns, however the fate and metabolism of TBBPA in plants is unknown. We studied the fate, metabolites, and transformation of 14C-labeled TBBPA in rice cell suspension culture. During the incubation for 14 days, TBBPA degradation occurred continuously in the culture, accompanied by formation of one anisolic metabolite [2,6-dibromo-4-(2-(2-hydroxy)-propyl)-anisole] (DBHPA) (50% of the degraded TBBPA) and cellular debris-bound residues (46.4%) as well as mineralization (3.6%). The cells continuously accumulated TBBPA in the cytoplasm, while a small amount of DBHPA (2.1% of the initially applied TBBPA) was detectable inside the cells only at the end of incubation. The majority of the accumulated residues in the cells was attributed to the cellular debris-bound residues, accounting for 70–79% of the accumulation after the first incubation day. About 5.4% of the accumulation was associated with cell organelles, which contributed 7.5% to the cellular debris-bound residues. Based on the fate and metabolism of TBBPA in the rice cell suspension culture, a type II ipso-substitution pathway was proposed to describe the initial step for TBBPA degradation in the culture and balance the fate of TBBPA in the cells. To the best of our knowledge, our study provides for the first time the insights into the fate and metabolism of TBBPA in plants and points out the potential role of type II ipso-hydroxylation substitution in degradation of alkylphenols in plants. Further studies are required to reveal the mechanisms for the bound-residue formation (e.g., binding of residues to specific cell wall components), nature of the binding, and toxicological effects of the bound residues and DBHPA.

Halogenated persistent organic pollutants (Hal-POPs) are significant contaminants in the indoor environment that are related to many human diseases. Ingestion of indoor dust is considered the major pathway of Hal-POP exposures, especially for children aged 3–6 years. Alongside a retrospective study on the associations between typical Hal-POP exposure and childhood asthma in Shanghai, indoor dust samples from asthmatic and non-asthmatic children's homes (n = 60, each) were collected. Polybrominated diphenyl ethers (PBDEs), polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) were measured by GC–MS. BDE-209, PCB-8 and p,p′-DDE were the predominant components in each chemical category. The concentrations of most Hal-POPs were significantly higher in the asthmatic families. The associations between Hal-POP exposure and asthma occurrence were examined by calculating the odds ratios (ORs) using a logistic regression model. A positive association was found between p,p′-DDE in indoor dust and childhood asthma (OR = 1.825, 95%CI: 1.004, 3.317; p = 0.048). The average daily doses of Hal-POP intake were calculated using the method provided by the USEPA. Non-carcinogenic health risks were preliminarily assessed. Our study indicated that exposure to p,p’-DDE via indoor dust may contribute to childhood asthma occurrence. Non-carcinogenic health risks were not found with the intake of Hal-POPs via the ingestion of indoor dust.

This study aims to establish the relative importance of sediment organic phosphorus (Po) to the total P and the major classes of organic molecules that contribute to sediment Po, determined by measuring their susceptibility to enzymatic hydrolysis, across a suite of lakes ranging from oligotrophic to eutrophic status. The results showed that Po accounted for 21–60% of total P, and bioavailable Po accounted for 9–34% of Po in the sediments. The bioavailable Po includes mainly labile (H2O-Po) and moderately labile (NaOH-Po) P forms. For H2O-Po (accounting for only1.4% of Po), 53% (average) was labile monoester P, 28% was diester P and 17% was phytate-like P. For NaOH-Po (accounting for 9–33% of Po), 32% was labile monoester P, 33% was phytate-like P and 18% was diester P. The composition of bioavailable Po, determined by enzyme assays, was related to the lake nutrient levels, which implies that sediment bioavailable Po could act as an effective indicator for lake eutrophic status. With the increase of lake nutrient levels, bioavailable Po content and alkaline phosphatase activity in the sediment all increased, indicating that Po represents an important and bioavailable source of P that increases with eutrophication, and could contribute to internal loading and resistance of eutrophic lakes to remediation. This implies that eutrophic lakes would maintain long-term eutrophic status and algal bloom phenomena even after the external input of P was controlled and the total P concentration of water has declined. Thus, in order to reduce the release risk of sediment P more efficiently and effectively, sediment P control technique should focus not only on reducing the total P and inorganic P, but should also pay close attention to the removal of bioavailable Po.

Sediment samples were collected to a depth of 60 cm along a 350-m sampling belt in a short-term-flooding riparian wetland in the Yellow River Delta of China in three sampling seasons. Contents of heavy metals were determined to investigate their spatial and temporal distributions, sources and ecotoxities. Our results showed that As contents in the top 20 cm sediments increased before decreasing along the sampling belt in summer, whereas they kept stable before increasing in fall and spring. Cd contents increased along the sampling belt in three sampling seasons, whereas Ni and Cr generally exhibited a decreasing tendency. Comparatively, Cu, Pb and Zn consistently increased at the first 50 m distance and then decreased before increasing from the distance of 150 m in summer and fall and increased to the maximum at the distance of 250 m and then showed a decrease in spring. Two “hotspots” of heavy metal accumulation in sediment cores along the belt were observed at the distance from 50 to 100 m in summer and at the distance from 200 to 300 m in spring. Most of sediment samples contained higher heavy metals in excess of threshold effect levels except for Zn and Pb in three sampling seasons and the values of toxic units in more than 30% of sediment samples exceeded 4 in summer. As, Ni and Cr had relatively higher contribution to the values of toxic units compared with other heavy metals in three sampling seasons. Multivariance analysis showed that As and Cd might originate from the same source and Cu, Zn, Cr, Pb and Ni might derive from another similar source. Cd was significantly correlated with salinity (p < 0.01) and pH (p < 0.05). Meanwhile, these heavy metals were also significantly correlated with other properties such as S, Al, TP, SOM and Silt + Clay.

The occurrence and spatial distribution of polychlorinated naphthalenes (PCNs) were investigated in sediments, upland and paddy soils from the Liaohe River Basin. Concentrations of ΣPCNs were in the range of 0.33–12.49 ng g⁻¹ dry weight (dw) in sediments and 0.61–6.60 ng g⁻¹ dw in soils, respectively. Tri-CNs and tetra-CNs were the dominating homologues. An increasing trend of PCNs contamination was found in sediments with the rivers flowing through industrial areas and cities. Soils collected near cities exhibited higher abundance of PCNs than that of rural areas. The distribution of PCNs was related to the local industrial activities, rather than total organic carbon. Positive matrix factorization (PMF) was used for the source apportionment of PCNs in sediments and paddy soils. The result of PMF indicated that PCNs in sediments and paddy soils were mainly from the industrial processes, with additional contributions from the historical use of Halowax 1014 and atmospheric deposition.

Microfibres are widespread contaminants in marine environments across the globe. Detecting in situ ingestion of microfibres by small marine organisms is necessary to understand their potential accumulation in marine food webs and their role in marine pollution. We have examined the gut contents of meiofauna from six sandy beaches in the Atlantic Ocean and the Mediterranean. Out of twenty taxonomic groups, three species of the common sandy beach annelid Saccocirrus displayed in situ ingestion of microfibres in all sites. Laboratory observations showed that species of Saccocirrus are able to egest microfibres with no obvious physical injury. We suggest that their non-selective microphagous suspension-feeding behaviour makes Saccocirrus more prone to ingest microfibres. Although microfibres are rapidly egested with no apparent harm, there is still the potential for trophic transfer into marine food webs through predation of Saccocirrus.

The occurrence of microplastics in the beach sand of the Bohai Sea was investigated for the first time. The Bohai Sea is the largest Chinese inner sea and its coastal region is one of the most densely urbanized and industrialized zones of China. Samples from three costal sites (i.e., Bijianshan, Xingcheng and Dongdaihe) were collected, quantified and identified for microplastic analysis. Effects of sample depth and tourism activity were investigated. Surface samples (2 cm) contained higher microplastic concentrations than deep samples (20 cm). Samples from the bathing beach exhibited higher microplastic concentrations than the non-bathing beach, suggesting the direct contribution of microplastics from tourism activity. Of eight types of microplastics that were found, PEVA (polyethylene vinyl acetate), LDPE (light density polyethylene) and PS (polystyrene) were the largest in abundances. Moreover, the non-plastic items from samples were analyzed and results revealed that the majority abundance of the observed non-plastics were viscose cellulose fibers. Further studies are required to evaluate the environmental hazards of microplastics, especially as they may “act as a contaminant transporter” to the Bohai Sea ecosystem.

Land use type, physical and chemical stressors, and organic microcontaminants were investigated for their effects on the biological communities (biofilms and invertebrates) in several Mediterranean rivers. The diversity of invertebrates, and the scores of the first principal component of a PCA performed with the diatom communities were the best descriptors of the distribution patterns of the biological communities against the river stressors. These two metrics decreased according to the progressive site impairment (associated to higher area of agricultural and urban-industrial, high water conductivity, higher dissolved organic carbon and dissolved inorganic nitrogen concentrations, and higher concentration of organic microcontaminants, particularly pharmaceutical and industrial compounds). The variance partition analyses (RDAs) attributed the major share (10%) of the biological communities' response to the environmental stressors (nutrients, altered discharge, dissolved organic matter), followed by the land use occupation (6%) and of the organic microcontaminants (2%). However, the variance shared by the three groups of descriptors was very high (41%), indicating that their simultaneous occurrence determined most of the variation in the biological communities.