Tris(1,3-dichloro-2-propyl) phosphate (TDCIPP) has been detected in various environmental media and has been implicated as a weak mutagen or carcinogen, but whether TDCIPP can promote the progression of liver tumor remains unclear. In this study, krasⱽ¹² genetically modified zebrafish, Tg(fabp10:rtTA2s-M2; TRE2:EGFP-krasᴳ¹²ⱽ), a model system in which liver tumors can be induced by doxycycline (DOX), was used to evaluate the liver tumor promotion potential of TDCIPP. Briefly, krasⱽ¹² transgenic females were exposed to 0.3 mg/L TDCIPP, 20 mg/L DOX or a binary mixture of 0.3 mg/L TDCIPP with 20 mg/L DOX, and liver size, histopathology, and transcriptional profiles of liver were determined. Treatment with TDCIPP resulted in increased liver size and caused more aggressive hepatocellular carcinoma (HCC). Compared with the exposure to DOX, TDCIPP in the presence of DOX up-regulated the expression of genes relevant with salmonella infection and the toll-like receptor signaling pathway. These results implied an occurrence of inflammatory reaction, which was sustained by the increase in the amount of infiltrated neutrophils in the liver of Tg(lyz:DsRed2) transgenic zebrafish larvae whose neutrophils were labelled by red fluorescent protein under the lysozyme C promoter. Furthermore, compared with the binary exposure of DOX and TDCIPP, treatment with a ternary mixture of TDCIPP, DOX and inflammatory response inhibitor (ketoprofen) significantly decrease the liver size and the amounts of neutrophils in the livers of kras and lyz double transgenic zebrafish larvae. Collectively, our results suggested that TDCIPP could promote the liver tumor progression by induction of hepatic inflammatory responses.

It has become apparent that the coastal zones of aquatic environments are significantly affected by plastics pollution. The accumulation of marine plastic litter on beaches is an important problem due to their significant environmental impacts. In this study, 13 coastal areas in Iskenderun Bay (NE Levantine coast of Turkey) were sampled in May 2018 to investigate meso and macroplastic (0.5–123.4 cm) pollution. A total of 1424 meso and macroplastic items in five categories (filament, film, foam, fragments, and pellets) were collected. The average meso and macroplastic concentration was 12.2 ± 3.5 pcs m−2 (12.3 ± 3.5 g m−2) and the mean size for all stations was 3.7 ± 0.16 cm. The highest meso and macroplastic concentration was found in the Dörtyol location (46.2 ± 7.6 pcs m−2) and the lowest concentration was found in the Y. Lagün location (2.3 ± 0.2 pcs m−2). Plastics were separated into 14 different groups based on their origins. The most dominant type was hard plastics (broken, fragmented, and deformed) with 59.8% and greenhouse coverage films with 11%. Our results shows that regardless their source plastics fluxes at beaches from various pathways. Results of this study provide useful information for designing monitoring strategies and setting management goals.

Indoor air contributes significantly to overall exposure, particularly for rural Chinese who often use solid fuels for cooking and/or heating. Unfortunately, overlooked rural indoor air leads to a critical knowledge gap. Simultaneous measurements in the kitchen, living room, and immediately outside of houses using six-channel particle counters were carried out in 18 biomass-burning rural and 3 non-biomass-burning urban households (as a comparison) in winter to characterize dynamic change patterns indoor air pollution and indoor-outdoor relationship. The rural households mainly used wood or crop residues for cooking and heating, while the urban households used pipelined natural gas for cooking and air conditioners for heating. In rural households with significant solid-fuel burning internal sources, the highest concentration was found in the kitchen (101 ± 56 μg/m³), with comparable levels in the living room (99 ± 46 μg/m³) and low levels in outdoor air (91 ± 39 μg/m³). A generally opposite direction of indoor-outdoor exchange was found between the rural and urban households. PM in kitchen air is smaller than that in living rooms and outdoors because solid fuel burning (mainly in rural households) and cooking oil heating (in rural and urban households). Indoor and outdoor PM concentration changed synchronously, with a slight delay in indoor air in urban households but a slight delay in outdoor air in rural households. Cooking, heating, and smoking elevated indoor PM significantly, but different from the cooking activity that produced peaks lasting for about 30 min, emissions from heating created a series of peaks due to frequent disturbance and fuel-feeding and had more significant impacts on the daily average concentration. Distinct indoor-outdoor relationships and dynamic change patterns between the two household categories w/o strong internal biomass burning sources imply that totally different model schemes are needed to quantitatively address indoor air pollution and inhalation exposure.

Farmland soil heavy metal contamination could pose potential risks to ecosystems, food safety and human health ultimately. Regional researches on the long-term monitoring of heavy metals in a soil-rice grain system, changed with environmental policy adjustment, have been hindered by limited detailed data. In this study, we collected 169 paired paddy rice grain and corresponding soil samples from a former intensive electronic-waste dismantling region to survey the current status of heavy metal contamination, and to reveal the temporal trends over the past decade based on the previous data obtained in 2006 and 2011. Moderate contaminations of Cd, Cu, Zn and Ni were observed in soil currently. Furthermore, 20.7% of rice grain samples exceeded the Cd threshold value. Cd, Cu, Zn and Pb shared the similar spatial distribution pattern with higher concentrations in northwest, which were contrary to Cr, Ni and As. Risk assessment indicated that much attention is required for the carcinogenic risk of Cr, Cd and As and non-carcinogen risk of Cr. Combining the spatial distribution of heavy metals in soil and rice grains, and the potential ecological risks, with the human health risks, the middle-west rice paddies were identified and proposed as priority areas. Percentage of soil Pb, Cd and Zn decreased in most area and slightly increased in northwest and east. Cu decreased in southwest and increased in central part, while Ni slightly increased in the whole region between 2006 and 2016. With the scrutiny of strict environmental policy, Cd still remained relatively constant levels in soil and rice grains during the last decade, which confirmed that the heavy metals were persisted over the long duration. Target sustainable and ongoing green remediation methods should be adopted urgently in specific area to guarantee food safety and human health for local residents.

Aerosol black carbon (BC) is the second strongest contributor to global warming, after CO₂, and it is linked to many adverse health effects. A sampling campaign of 15 months was carried out in León (Spain) in order to evaluate the scavenging of BC with an ensemble aethalometer-disdrometer. The aethalometer provides the concentration of equivalent black carbon (eBC), and the disdrometer, the raindrop size distribution. A total of seventy-five rain events were studied and in 73% of them there was an effective (eBCᵢₙᵢₜᵢₐₗ > eBCfᵢₙₐₗ) scavenging, with a mean decrease of 48 ± 37% in long rain events (>8 h) and 39 ± 38% in short rain events. The scavenging of BC is strongly related to its source. Thus, the scavenging coefficient (SC) mean value of the BC from fossil fuel (eBCff) for short and long rain events was 5.1 10⁻⁵ and 1.3 10⁻⁵ s⁻¹, respectively. For the BC from biomass burning (eBCbb), the SC values were 1.6 10⁻⁴ and 2.8 10⁻⁵ s⁻¹ in short and long events, respectively. There was a significant positive correlation between the SC and the number of drops with diameters between 0.375 and 2.5 mm. Rain scavenging of eBC was analyzed depending on the air mass origin obtaining an effective scavenging for air masses from Atlantic, Arctic and Africa. A linear model (R² = 0.72) was built to estimate the ΔeBC values with variables from an aethalometer, a disdrometer and a weather station: eBC concentration before rain, swept volume and precipitation accumulated. A Kolmogorov-Smirnov statistical test confirmed the goodness of fit of the model to the measured data.

Sorption studies of organic pollutants by microplastics (MPs) in single-solute systems are well established in the literature. However, actual aquatic environments always contain a mixture of contaminants. Prediction of the fate and biological effects of MPs-mediated chemical exposure requires a better understanding of sorption-desorption processes of multiple organic contaminants by MPs. In this study, the altered sorption and desorption behaviors of individual organic UV filters (BP-3 and 4-MBC) in the presence of cosolutes (BP-3, 4-MBC, EHMC and OC) on two types of MPs (LDPE and PS) were examined. In most cases, co-occurrence of other organic UV filters appeared to have an antagonistic effect on the sorption of primary solute, which was consistent with trends found in previous studies. Nevertheless, the sorption uptake of 4-MBC as primary solute on PS was enhanced in the presence of cosolute(s), arising presumably from solute multilayer formation caused by laterally attractive π-π interactions between adsorbed cosolute(s) and 4-MBC molecules. Such formation of multilayer sorption in multi-solute systems depends on the solute hydrophobicity and concentration as well as inherent sorptivity of MPs. Our further desorption experiments revealed that the bioaccessibility of primary solute was significantly elevated with cosolutes, even though competitive sorption was observed under the same experimental conditions. These findings supplement the current knowledge on sorption mechanisms and interactions of multiple organic contaminants on MPs, which are critical for a comprehensive environmental risk assessment of both MPs and hazardous anthropogenic contaminants in natural environments.

Flaring is a common and necessary operation for chemical industries, which is designed to manage dangerous process overpressure scenarios or to release and destroy off-spec products during chemical plant upsets or turnarounds. However, excessive flaring can emit large quantities of VOCs and NOx into the atmosphere, which will cause transient and localized ozone pollution events in the presence of sunlight. The objective of this study was to quantify the impact to regional air-quality due to flare emissions from chemical plant start-up operations through the coupling of dynamic process simulations via Aspen Plus and air-quality simulations via CAMx. Simulation results from case studies have indicated that the corresponding ozone increments can vary significantly from 0.2 ppb to 17.8 ppb under different temporal and spatial factors, including the start-up starting hour, starting day, and plant location. Additional ozone sensitivity simulations have also indicated that the corresponding ozone increments are higher when the plant is located in a VOC-limited area than that in a NOx-limited area. The results from this study have delivered a cost-effective air-quality control practice for plant start-ups with a minimum air-quality impact through selecting the optimal starting time within the allowable ranges. The practice has significant potential to benefit all stakeholders, including environmental agencies, chemical industries, and local communities.

As the second largest economy in the world, China experiences severe particulate matter (PM) pollution in many of its cities. Meteorological factors are critical in determining both areal and temporal variations in PM pollution levels; understanding these factors and their interactions is critical for accurate forecasting, comprehensive analysis, and effective reduction of this pollution. This study analyzed areal and temporal variations in concentrations of PM₂.₅, PM₁₀, and PMcₒₐᵣₛₑ (PM₁₀ - PM₂.₅) and PM₂.₅ to PM₁₀ ratios (PM₂.₅/PM₁₀) and their relationships with meteorological conditions in 366 Chinese cities from January 1, 2015 to December 31, 2017. On the national scale, PM₂.₅ and PM₁₀ decreased from 48 to 42 μg m⁻³ and from 88 to 84 μg m⁻³, respectively, and the annual mean concentrations were 45 μg m⁻³ (PM₂.₅) and 84 μg m⁻³ (PM₁₀) during the time period (2015–2017). In most regions, largest PM concentrations occurred in winter. However, in northern China, in spring PMcₒₐᵣₛₑ concentrations were highest due to dust. The PM₂.₅/PM₁₀ ratio was higher in southern than in northern China. There were large regional disparities in PM diurnal variations. Generally, PM concentrations were negatively correlated with precipitation, relative humidity, air temperature, and wind speed, but were positively correlated with surface pressure. The sunshine duration showed negative and positive impacts on PM in northern and southern cities, respectively. Meteorological factors impacted particulates of different size differently in different regions and over different periods of time.

Polychlorinated biphenyls (PCBs) have been detected as prevalent environmental contaminants in water, food and biota. Previous studies in vitro have shown that a variety of sorbent materials, including carbon, can sorb PCBs; however, PCB sorbents that can be added to food or drinking water to decrease toxin bioavailability in humans and animals have not been reported. To address this problem, we have developed a broad-acting and highly effective sorbent for PCBs using montmorillonite clays reported to be safe for consumption in animals and humans. In this study, calcium montmorillonite clays were acid processed (APMs) and the interactions of six PCB congeners (PCB 77, 126, 153, 157, 154 and 155) on the surfaces of APMs were characterized. Computational models and isothermal analyses were used to derive surface capacities and affinities, delineate mechanisms and predict the thermodynamics of sorption. To confirm the safety and predict the efficacy of APMs against individual PCBs and common mixtures (Aroclors 1254 and 1260), we have also used a living organism (Hydra vulgaris) that is sensitive to toxins. APMs significantly protected hydra against the toxicity of PCBs and Aroclors. This finding was supported by studies showing tight binding; high capacity, affinity, and enthalpy; and a low therapeutic dose.

As one of the highest energy consuming and polluting industries, the power generation industry is an important source of particulate matter emissions. Recently, implementation of ultra-low emission technology has changed the emission characteristic of fine particulate matter (PM2.5). In this study, PM2.5 emitted from four typical power plants in China was sampled using a dilution channel sampling system, and analyzed for elements, water-soluble ions and carbonaceous fractions. The results showed that PM2.5 concentrations emitted from the four power plants were 0.78 ± 0.16, 0.63 ± 0.09, 0.29 ± 0.07 and 0.28 ± 0.01 mg m−3, respectively. Emission factors were 0.004–0.005 g/kg coal, nearly 1–2 orders of magnitude lower than those reported in previous studies. The highest proportions of PM2.5 consisted of organic carbon (OC), SO42−, elemental carbon (EC), NH4+, Al and Cl−. Coefficients of divergence (CDs) were in the ranges 0.22–0.41 (for an individual plant), 0.43–0.69 (among different plants), and 0.60–0.99 (in previous studies). The results indicated that the source profiles of each tested power plant were relatively similar, but differed from those in previous studies. Enrichment factors showed elevated Se and Hg, in accordance with the source markers Se and As. Comparing source profiles with previous studies, the proportion of OC, EC and NH4+ were higher, while the proportion of Al in PM2.5 were relatively lower. The OC/EC ratio became concentrated at ∼5. Results from this study can be used for source apportionment and emission inventory calculations after implementation of ultra-low emission technologies.