The life cycle of diesel fuel in non-passenger vehicles was assessed for all registered vehicles in Qatar as of November 2017. The Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET) model was used as a source of normalized data to evaluate diesel fuel emissions for all non-passenger vehicle categories. This work aims at estimating the emissions from all non-passenger diesel vehicles in Qatar and evaluating the impact of the fuel life cycle assessment. The emissions of CO2, NOx, CO, SO2, VOC, black carbon (BC), organic carbon, fine particulates PM2.5, and coarse particulates PM10 were evaluated. SO2 emissions were found to be dominant during the well to pump (WTP) stage of the life cycle assessment (LCA) process, while the pump to wheel (PTW) stage was found to be dominated by CO, VOC, PM10, PM2.5, and BC emissions. NOx and organic carbon emissions were virtually the same during both stages. Total greenhouse gas emissions amounted to 5367 kt of CO2 equivalent (CO2-eq) in 2017 as compared with that in 2014 (5277 kt), the only reported value in Qatar for transportation emissions. In addition, several mitigation strategies are proposed to ensure sustainability in the transport sector and to minimize the negative impact of diesel fuel emissions in the country.

Environmental pollution and strict emission norms are promoting researchers to explore the methods for reducing pollution and provide optimum solution. By considering these situation as the baseline, study was conducted to analyse the effect of exhaust gas recirculation (EGR) on performance and emission of the DI diesel engine. The effects of Injection Timings (IT), split injection and Exhaust Gas Recirculation on performance, emission characteristics of diesel engine fuelled neem biodiesel blends are investigated. Initially experiments are conducted with diesel, NB5, NB10 with original injection timing of 23° bTDC with direct injection and are considered as base reading. The fuel injection is optimized (at 19° bTDC and 16% split injection) and the effect of EGR rate at this optimized condition is analysed. Significant reduction of about 65.3%, 67% and 57% in the amount of NOx was obtained at full load as compared to base readings. Smoke emissions reduced by 2.8-3.4% and CO emissions reduced by around 52% for diesel and biodiesel blends at full load.

It has been more than 20 years that the Measurement of Pollution in The Troposphere (MOPITT) mission onboard the NASA Terra satellite keeps providing us CO atmospheric concentration measurements around the globe. The current paper observes CO mixing ratio from the MOPITT Version 8 (MOP03J_V008) instrument in order to study the spatiotemporal analysis of CO (spanning from April 2000 to February 2020) in the Troposphere of Iran. Results indicate that the average CO in Iran’s troposphere has been 133.5 ppbv (i.e., 5.5 ppbv lower than the global mean CO). The highest distribution of CO (with an average of 150 ppbv) belongs to the city of Tehran (the capital of Iran) as well as the Caspian Sea coastal area, while the lowest value (with an average of less than 110 ppbv) has been estimated on the Zagros Mountains (southwestern Iran). The highest and lowest CO values have been observed in cold and hot months, respectively. Seasonally speaking, it is also clear that the highest and lowest carbon monoxide values occur in winter and summer, respectively. The vertical profile of MOPITT CO shows the maximum CO concentration at lower levels of the troposphere. It has been expanded up to 150 hPa. The trend is investigated by means of Pearson correlation coefficient statistical method. Overall, long-term monitoring of MOPITT CO in Iran indicates a decreasing trend of tropospheric CO over the 20 years (Y=-0.008X+449.31). Possible reasons for such a decrease can be related to improved transportation fleet, increased fuel quality, plans for traffic control, promotion of heating systems, and promotion of industrial fuels and factories.

The impact of Industrialization has always been related to the better economic and social transformation. However, it should be well planned for environmental sustainability. Landfilling is the most used municipal solid waste (MSW) disposal method in Malaysia. Raw and treated leachate collected from Jerangau-Jabor Landfill Site (JJLS), Kuantan, Pahang were analysed for the content of silver, cadmium, chromium, copper, iron, lead, zinc using Flame Atomic Absorption Spectrometry (FAAS) and Inductively Coupled Plasma Mass Spectrometry (ICP-MS). The metal analyses result were compared with standard limits from the Environmental Quality (Control of Pollution from Solid Waste Transfer Station and Landfill) Regulations 2009, Malaysian Environmental Quality Act 1974 (Act 127) set by the Department of Environment, Ministry of Natural Resources and Environment, Malaysia and used to calculate the sub-leachate pollution index of heavy metals (sub-LPIhm) to evaluate the pollution potential of the heavy metals. The sub-LPIhm is one of the sub-index needed to calculate the Leachate Pollution Index (LPI) together with the sub-LPI organic (sub-LPIorg) and sub-LPI inorganic (sub-LPIinorg). LPI is the level of leachate pollution potential of a landfill site. All the heavy metals in the raw leachate were significantly higher than the treated leachate. Some were found to be above the permissible standard limit stipulated in the regulation. However, the sub-LPIhm showed that the level of heavy metal pollution potential of the leachate is low. It is recommended that the treated leachate should undergo continuous treatment to ensure the discharge leachate complied with the standard limit.

The contamination of environment with heavy metals has become a serious problem which can affect the human health. Three heavy metals (Zn, Cd and Pb) were determined in soil and plants for below and aboveground parts along landfill Demina center, located in the wilaya of Jijel, Algeria to evaluate their behavior and uptake by Ditrichia viscosa, Juncus effusus and Solanum nigrum. In our research we tried to study the capacity of these spontaneous plants to accumulate and to translocate heavy metals from soil to their tissues during three years. The heavy metals examined in the soils of the study area showed variations in concentrations, the study area may be practically unpolluted with Zn and Pb (CF; 0.45 and 0.98 successively) and very contaminated with Cd (CF; 8.53). According to the results obtained, the soil is uncontaminated with lead (Igeo=-0.60) and zinc (Igeo= -1.42) but it is heavily contaminated with cadmium (Igeo=2.5) along the study area. Overall the BCFS (bioconcentration factors) are superior to 1, for the all heavy metals and species. However, BCFs follow the following order; BCFZn>BCFPb>BCFCd for Ditrichia viscosa, the following order BCFPb>BCFZn>BCFCd for Juncus effuses and follow the following order; BCFZn>BCFCd>BCFPb for Solanum nigrum. The TFs (translocation factor) of the present study showed that Solanum nigrum can translocate the three of the metals into their aboveground parts.

This study on the heavy metal content of a local drinking water source in South-east Nigeria was carried out in 3 sampling stations between May 2019 and October 2019. Pollution indices and health risk assessment for non-carcinogenic were used to check the water’s suitability for human consumption. The indices were heavy metal pollution index (HPI) and Contamination Index (Cd). Eight metals were evaluated with standard methods and compared with Nigerian and WHO drinking water standards. Some metals like iron, lead and cadmium exceeded the recommended limits. The stations Heavy Metal Pollution Index ranged between 511.4 and 512.4 while the monthly values ranged between 279.8 and 547.6; all exceeding the threshold value of 100. Contamination Index ranged between 3.12 and 3.32 (stations) and -0.80 to 4.80 (month) indicating high contamination potential and low to high contamination potentials respectively. All the hazard indices also exceeded one (1). Stations 1 and 2 were higher in all the indices. All the indices were linked the high values of iron, lead and cadmium, influenced by sand mining activities. The pollution indices and Health Risk Assessment converged to show that the waters of Iyiakwu River are not fit for human consumption. The children are more vulnerable since it the main source of drinking water in the area.

Inoculation of endophytic bacteria has been accepted as a promising technique to assist phytostabilization of heavy metal-contaminated soils. This study investigated the effects of inoculating a bacterial strain closely related to Pseudomonas pyschrophila on the plant growth, and phytostabilization of fast-growing trees Acacia mangium and Eucalyptus camaldulensis, growing on artificial spiked soil with Pb up to 1500 mg/kg. After 60 days, the results showed that the strain closely related to P. pyschrophila slightly increased Pb bioavailability and Pb uptake by A. mangium, compared to non-inoculated controls. It slightly reduced Pb bioavailability in soil, but it did not affect the Pb uptake by E. camaldulensis, compared to non-inoculated controls. Interestingly, it was able to significantly increase Pb content in shoots by 3.07-fold in A. mangium and 2.95-fold in E. camaldulensis, compared to non-inoculated controls. Although the inoculation of the strain closely related to P. pyschrophila slightly increased the translocation factor (TF) of Pb in both tree species, their TF values were less than 1. This indicates that plants associated with the strain closely related to P. pyschrophila are suitable for phytostabilization of A. mangium, which may be used for cleaning up Pb contaminated sites. This strain displayed different influences on plant species and was found not suitable for phytostabilization of E. camaldulensis.

The aim of this study is to synthesize and characterize an economical and environmentally-friendly adsorbent with high adsorption capacity. For this purpose, the walnut shells (Juglans regia L.) were chemically modified using sulfuric and citric acids, separately. After pyrolysis and synthesis of activated carbon (AC), the optimization of conditions at the preconcentration/removal step was performed using parameters such as pH and contact time for uranium in the model solutions. The measurements were carried out by inductively coupled plasma-mass spectrometry (ICP-MS). From the shapes of the BET isotherms, it may be stated that activated carbon exhibit type I. It was found that the surface area and total pore volume of the activated carbon were 696.6 m2/g and 0.35 mL/g, respectively. The adsorption capacity was found to be 220 mg/g. It was found that the optimum pH is 6.0 for preconcentration/removal using AC obtained by sulfuric acid as chemically-modifier. The optimized method was applied to determination of U at ng/mL levels in the model solutions.

Currently, the reduction of reactive dyes present in the textile effluent is a big challenge due to the threat to the environment. Existing physical and chemical methods contains many drawbacks. In the present scenario microbial reduction pays much attention and current focus of research. Therefore, the present study isolated dye decolorizing bacterium Exiguiobacterium aurantiacum (TSL7) from activated sludge and identified by molecular techniques and 16S rDNA sequences. Decolorization was not established in Bushnell hass broth composition in accordance with absence of carbon and nitrogen source. The three environmental factors pH, starch and beef extract were selected from Plackett-Burman design experiments. The central composite design was employed to optimize the maximum removal of remazol golden yellow (91.83%) with pH, 6.89, starch, 0.49% (w/v) and beef extract 0.67% (w/v) respectively, These key factors playing a major role in the bacterial dye removal and the interactions were evaluated statistically. The optimal value of significant factors supports to maximize the dye removal competency of isolated bacterium. Thus results exhibited that local salt tolerant bacterium Exiguiobacterium aurantiacum (TSL7) could be a potential candidate for an in situ-bioremediation of inorganic salts abundant textile effluents in the textile industry.

Global plastic production has exceeded 300 million tons per year (Plastics Europe, 2015). In the marine and freshwater environments, larger plastics abrade and photo-degrade resulting in persistent environmental microplastics that are not effectively removed by existing wastewater treatment plants (WWTPs). The ecological effects of microplastics on the marine environment are poorly understood, with even less attention to freshwater systems. To assess whether microplastics have infiltrated food webs of shallow nearshore ecosystems of the St. Lawrence River, we sampled four sites along the international section of the St. Lawrence River, from Alexandria Bay to Waddington, NY. Twelve sediment samples along with one hundred and forty-nine Dreissenid mussels (Dreissena polymorpha and D. bugensis) were collected from the littoral zone, and forty one road-killed anuran amphibian specimens were collected adjacent to the river.  Sediment subsamples at two of four sediment sampling sites contained plastic micro-particles. No microbeads were detected within any of the Dreissenid mussels or anuran digestive tract samples. The Dreissenids were likely too small to ingest microbeads greater than 35 microns. Microplastics congregating in the littoral zone may pose a threat within the food web through potential ingestion, requiring further methodological development.