International audience | Environmentally mediated sensitivity of Lemna minor to copper (Cu) was evaluated for the first time in three experiments: the effects of two levels of nutrient concentration, light irradiance or Cu pre-exposure were tested. Various Cu concentrations (ranging from 0.05 to 0.25 mg/L) were used to assess the sensitivity of L. minor to this metal, using one common strain previously acclimatized to two different levels of light intensity, nutrient enrichment and Cu pre-exposure. Our results showed a phenotypic plastic response of the relative growth rates based on frond number and fresh mass production, and maximum quantum yield of photosystem II (Fv/Fm). Growth was affected by the three environmental conditions both prior and during Cu exposure, whereas Fv/Fm was mostly affected during Cu exposure. Copper significantly influenced all the parameters measured in the three experiments. Environmental conditions significantly modified L. minor sensitivity to Cu in all experiments, with up to twofold difference depending on the treatment. Growth rate was the parameter that was most impacted. Our study revealed for the first time the existence of phenotypic plasticity in L. minor sensitivity to chemical contamination, and implies that environmental context needs to be taken into account for a relevant risk assessment.

Environmentally mediated sensitivity of Lemna minor to copper (Cu) was evaluated for the first time in three experiments: the effects of two levels of nutrient concentration, light irradiance or Cu pre-exposure were tested. Various Cu concentrations (ranging from 0.05 to 0.25 mg/L) were used to assess the sensitivity of L. minor to this metal, using one common strain previously acclimatized to two different levels of light intensity, nutrient enrichment and Cu pre-exposure. Our results showed a phenotypic plastic response of the relative growth rates based on frond number and fresh mass production, and maximum quantum yield of photosystem II (Fᵥ/Fₘ). Growth was affected by the three environmental conditions both prior and during Cu exposure, whereas Fᵥ/Fₘ was mostly affected during Cu exposure. Copper significantly influenced all the parameters measured in the three experiments. Environmental conditions significantly modified L. minor sensitivity to Cu in all experiments, with up to twofold difference depending on the treatment. Growth rate was the parameter that was most impacted. Our study revealed for the first time the existence of phenotypic plasticity in L. minor sensitivity to chemical contamination, and implies that environmental context needs to be taken into account for a relevant risk assessment.

International audience

Depending on the actual number of soil-based on-site wastewater treatment system (OWTS) in an area, on-site sanitation may be a significant source of pollutants and a threat to groundwater. Even in the case of a system functioning correctly, here, a sand filter substituted for the in-situ soil, as the treated effluent may reach to the water table, it is necessary evaluating in situ how much the sand and underneath soil respectively contribute to pollutant removal. On the plot of a household in a small rural community, the functioning of a real scale OWTS was monitored for 1.5 years. This system, composed of a septic tank connected to a 5 × 5 m² and 0.7-m thick aerobic sand filter was equipped with soil hydrodynamic probes (water content and matrix potential) during construction. By using the instantaneous profile method of water content, the intermittent infiltrated flux was determined across the sand-pack according to position and time. Treated water infiltrates into underneath soil acting as post-treatment. Quality of interstitial liquid from the sand and the soil was analysed each month on a 12-h pumping sample obtained through porous plates. Results of water fluxes and concentrations provide an estimate of the annual flux to the vadose zone and groundwater of metals, nutrients and some organic micro-pollutants (parabens and triclosan) through the OWTS and subsoil.

[Departement_IRSTEA]Eaux [TR1_IRSTEA]QUASARE [ADD1_IRSTEA]Systèmes aquatiques soumis à des pressions multiples | International audience | Growth regulator insecticides with juvenoid activity can affect the development and reproduction of non-target organisms such as crustaceans. In this perspective, our previous studies revealed deleterious effects of the juvenoid fenoxycarb at 5 µg L

Growth regulator insecticides with juvenoid activity can affect the development and reproduction of non-target organisms such as crustaceans. In this perspective, our previous studies revealed deleterious effects of the juvenoid fenoxycarb at 5 μg L −1 on the embryogenesis and at 50 μg L −1 on the reproductive behavior of the amphipod Gammarus fossarum. In the present study, to determine whether data generated with one amphipod species can be extended to other gammarid species, we tested the effects of a 5 μg L −1 fenoxycarb exposure on three European amphipod species: G. fossarum, Gammarus roeseli, and Echinogammarus longisetosus. We exposed individually 60 freshly fertilized females to fenoxycarb throughout the entire oogenesis/embryogenesis cycle (i.e., 19 days). In newborn individuals from exposed embryos, we measured both pigmentation and lipid reserve impairments while in exposed females, we observed reproductive behavior. At 5 μg L −1 fenoxycarb, reproductive behavior was only altered in G. fossarum. This study demonstrates the variability of the toxic response among the three gammaridae species, underlining the need for acquiring data with a broad phylogenetic representation to better predict toxic effects on freshwater ecosystems. © 2019, Springer-Verlag GmbH Germany, part of Springer Nature. | This research was financially supported by the French Ec2co program. | Peer reviewed

While migratory seabirds dominate ecotoxicological studies within the Arctic, there is limited knowledge about exposure and potential effects from circulating legacy and emerging contaminants in species who reside in the high-Arctic all year round. Here, we focus on the case of the Mandt's Black guillemot (Cepphus grylle mandtii) breeding at Kongsfjorden, Svalbard (79.00°N, 11.66°E) and investigate exposure to legacy and emerging contaminants in relation to individual physiological status, i.e. body condition, oxidative stress and relative telomere length. Despite its benthic-inshore foraging strategy, the Black guillemot displayed overall similar contaminant concentrations in blood during incubation (∑PCB11 (15.7 ng/g w.w.) > ∑PFAS5 (9.9 ng/g w.w.) > ∑Pesticides9 (6.7 ng/g w.w.) > ∑PBDE4 (2.7 ng/g w.w.), and Hg (0.3 μg/g d.w.) compared to an Arctic migratory seabird in which several contaminant-related stress responses have been observed. Black guillemots in poorer condition tended to display higher levels of contaminants, higher levels of reactive oxygen metabolites, lower plasmatic antioxidant capacity, and shorter telomere lengths; however the low sample size restrict any strong conclusions. Nevertheless, our data suggests that nonlinear relationships with a threshold may exist between accumulated contaminant concentrations and physiological status of the birds. These findings were used to build a hypothesis to be applied in future modelling for describing how chronic exposure to contaminants may be linked to telomere dynamics.

While migratory seabirds dominate ecotoxicological studies within the Arctic, there is limited knowledge about exposure and potential effects from circulating legacy and emerging contaminants in species who reside in the high-Arctic all year round. Here, we focus on the case of the Mandt's Black guillemot (Cepphus grylle mandtii) breeding at Kongsfjorden, Svalbard (79.00°N, 11.66°E) and investigate exposure to legacy and emerging contaminants in relation to individual physiological status, i.e. body condition, oxidative stress and relative telomere length. Despite its benthic-inshore foraging strategy, the Black guillemot displayed overall similar contaminant concentrations in blood during incubation (∑PCB11 (15.7 ng/g w.w.) > ∑PFAS5 (9.9 ng/g w.w.) > ∑Pesticides9 (6.7 ng/g w.w.) > ∑PBDE4 (2.7 ng/g w.w.), and Hg (0.3 μg/g d.w.) compared to an Arctic migratory seabird in which several contaminant-related stress responses have been observed. Black guillemots in poorer condition tended to display higher levels of contaminants, higher levels of reactive oxygen metabolites, lower plasmatic antioxidant capacity, and shorter telomere lengths; however the low sample size restrict any strong conclusions. Nevertheless, our data suggests that nonlinear relationships with a threshold may exist between accumulated contaminant concentrations and physiological status of the birds. These findings were used to build a hypothesis to be applied in future modelling for describing how chronic exposure to contaminants may be linked to telomere dynamics.

International audience

Integrated hydrodynamic modelling is an efficient approach for making semi-quantitative scenarios reliable enough for groundwater management, provided that the numerical simulations are from a validated model. The model set-up, however, involves many inputs due to the complexity of both the hydrological system and the land use. The case study of a Mediterranean alluvial unconfined aquifer in the lower Var valley (Southern France) is useful to test a method to estimate lacking data on water abstraction by small farms in urban context. With this estimation of the undocumented pumping volumes, and after calibration of the exchange parameters of the stream-aquifer system with the help of a river model, the groundwater flow model shows a high goodness of fit with the measured potentiometric levels. The consistency between simulated results and real behaviour of the system, with regard to the observed effects of lowering weirs and previously published hydrochemistry data, confirms reliability of the groundwater flow model. On the other hand, accuracy of the transport model output may be influenced by many parameters, many of which are not derived from field measurements. In this case study, for which river-aquifer feeding is the main control, the partition coefficient between direct recharge and runoff does not show a significant effect on the transport model output, and therefore, uncertainty of the hydrological terms such as evapotranspiration and runoff is not a first-rank issue to the pollution propagation. The simulation of pollution scenarios with the model returns expected pessimistic outputs, with regard to hazard management. The model is now ready to be used in a decision support system by the local water supply managers.

International audience | Chlorpyrifos manufacturing wastewater (CMW) is characterized by complex composition, high chemical oxygen demand (COD) concentration, and toxicity. An integrated process comprising of peroxide (H2O2) promoted-catalytic wet air oxidation (PP-CWAO), struvite precipitation, and biological aerated filters (BAF) was constructed to treat CMW at a starting COD of 34000–35000 mg/L, total phosphorus (TP) of 5550–5620 mg/L, and total organophosphorus (TOP) of 4700–4840 mg/L. Firstly, PP-CWAO was used to decompose high concentrations of organic components and convert concentrated and recalcitrant TOP to inorganic phosphate. Copper citrate and ferrous citrate were used as the catalysts of PP-CWAO. Under the optimized conditions, 100% TOP was converted to inorganic phosphate with 95.6% COD removal. Then, the PP-CWAO effluent was subjected to struvite precipitation process for recovering phosphorus. At a molar ratio of Mg2+:NH4+:PO43− = 1.1:1.0:1.0, phosphate removal and recovery reached 97.2%. The effluent of struvite precipitation was further treated by the BAF system. Total removals of 99.0%, 95.2%, 97.3%, 100%, and 98.3% were obtained for COD, total suspended solids, TP, TOP, and chroma, respectively. This hybrid process has proved to be an efficient approach for organophosphate pesticide wastewater treatment and phosphorus reclamation.

Chlorpyrifos manufacturing wastewater (CMW) is characterized by complex composition, high chemical oxygen demand (COD) concentration, and toxicity. An integrated process comprising of peroxide (H₂O₂) promoted-catalytic wet air oxidation (PP-CWAO), struvite precipitation, and biological aerated filters (BAF) was constructed to treat CMW at a starting COD of 34000–35000 mg/L, total phosphorus (TP) of 5550–5620 mg/L, and total organophosphorus (TOP) of 4700–4840 mg/L. Firstly, PP-CWAO was used to decompose high concentrations of organic components and convert concentrated and recalcitrant TOP to inorganic phosphate. Copper citrate and ferrous citrate were used as the catalysts of PP-CWAO. Under the optimized conditions, 100% TOP was converted to inorganic phosphate with 95.6% COD removal. Then, the PP-CWAO effluent was subjected to struvite precipitation process for recovering phosphorus. At a molar ratio of Mg²⁺:NH₄⁺:PO₄³⁻ = 1.1:1.0:1.0, phosphate removal and recovery reached 97.2%. The effluent of struvite precipitation was further treated by the BAF system. Total removals of 99.0%, 95.2%, 97.3%, 100%, and 98.3% were obtained for COD, total suspended solids, TP, TOP, and chroma, respectively. This hybrid process has proved to be an efficient approach for organophosphate pesticide wastewater treatment and phosphorus reclamation.

International audience | Pyrolysis of waste materials to produce biochar is an excellent and suitable alternative supporting a circular bio-based economy. One of the properties attributed to biochar is the capacity for sorbing organic contaminants, which is determined by its composition and physicochemical characteristics. In this study, the capacity of waste-derived biochar to retain volatile fuel organic compounds (benzene, toluene, ethylbenzene and xylene (BTEX) and fuel oxygenates (FO)) from artificially contaminated water was assessed using batch-based sorption experiments. Additionally, the sorption isotherms were established. The results showed significant differences between BTEX and FO sorption on biochar, being the most hydrophobic and non-polar contaminants those showing the highest retention. Furthermore, the sorption process reflected a multilayer behaviour and a relatively high sorption capacity of the biochar materials. Langmuir and Freundlich models were adequate to describe the experimental results and to detect general differences in the sorption behaviour of volatile fuel organic compounds. It was also observed that the feedstock material and biochar pyrolysis conditions had a significant influence in the sorption process. The highest sorption capacity was found in biochars produced at high temperature (> 400 °C) and thus rich in aromatic C, such as eucalyptus and corn cob biochars. Overall, waste-derived biochar offers a viable alternative to be used in the remediation of volatile fuel organic compounds from water due to its high sorption capacity.

Pyrolysis of waste materials to produce biochar is an excellent and suitable alternative supporting a circular bio-based economy. One of the properties attributed to biochar is the capacity for sorbing organic contaminants, which is determined by its composition and physicochemical characteristics. In this study, the capacity of waste-derived biochar to retain volatile fuel organic compounds (benzene, toluene, ethylbenzene and xylene (BTEX) and fuel oxygenates (FO)) from artificially contaminated water was assessed using batch-based sorption experiments. Additionally, the sorption isotherms were established. The results showed significant differences between BTEX and FO sorption on biochar, being the most hydrophobic and non-polar contaminants those showing the highest retention. Furthermore, the sorption process reflected a multilayer behaviour and a relatively high sorption capacity of the biochar materials. Langmuir and Freundlich models were adequate to describe the experimental results and to detect general differences in the sorption behaviour of volatile fuel organic compounds. It was also observed that the feedstock material and biochar pyrolysis conditions had a significant influence in the sorption process. The highest sorption capacity was found in biochars produced at high temperature (> 400 °C) and thus rich in aromatic C, such as eucalyptus and corn cob biochars. Overall, waste-derived biochar offers a viable alternative to be used in the remediation of volatile fuel organic compounds from water due to its high sorption capacity.