The aim of the present study was to describe the accumulation of trace metals in the liver, kidney, gills, muscles, and skin of four edible fish species (Tor putitora, Cirrhinus mrigala, Labeo calbasu, and Channa punctatus) of Rawal Lake Reservoir, Pakistan. The fish samples were collected in the pre-monsoon (May 2008) and post-monsoon (October 2007) seasons and were analyzed for heavy metals by using an atomic absorption spectrometer. Kidney and liver showed relatively high concentrations of heavy metals. The accumulation of metals in the different organs of the fish (skin, muscles, and gills) in post-monsoon was higher than in pre-monsoon. In pre-monsoon, the metals followed the trend Zn > Pb > Fe > Cr > Ni > Mn > Co > Cu > Cd > Li, while in the post-monsoon season, the trend was Fe > Pb > Cr > Ni > Zn > Cu > Co > Mn > Cd > Li. The concentrations of Ni, Cr, and Pb in the muscle of all fish species were higher than the WHO guideline values of heavy metals in fishes for human consumption except in T. putitora. Cu level was nearly equal to the WHO maximum levels in C. mrigala and L. calbasu, while it was lower in T. putitora and C. punctatus. It is strongly advocated that risk assessment studies should be conducted and there is an urgent need for water quality restoration and management of Rawal Lake Reservoir.

To investigate the spatial and seasonal variations of nitrous oxide (N₂O) fluxes and understand the key controlling factors, we explored N₂O fluxes and environmental variables in high marsh (HM), middle marsh (MM), low marsh (LM), and mudflat (MF) in the Yellow River estuary throughout a year. Fluxes of N₂O differed significantly between sampling periods as well as between sampling positions. During all times of day and the seasons measured, N₂O fluxes ranged from −0.0051 to 0.0805 mg N₂O m⁻² h⁻¹, and high N₂O emissions occurred during spring (0.0278 mg N₂O m⁻² h⁻¹) and winter (0.0139 mg N₂O m⁻² h⁻¹) while low fluxes were observed during summer (0.0065 mg N₂O m⁻² h⁻¹) and autumn (0.0060 mg N₂O m⁻² h⁻¹). The annual average N₂O flux from the intertidal zone was 0.0117 mg N₂O m⁻² h⁻¹, and the cumulative N₂O emission throughout a year was 113.03 mg N₂O m⁻², indicating that coastal marsh acted as N₂O source. Over all seasons, N₂O fluxes from the four marshes were significantly different (p < 0.05), in the order of HM (0.0256 ± 0.0040 mg N₂O m⁻² h⁻¹) > MF (0.0107 ± 0.0027 mg N₂O m⁻² h⁻¹) > LM (0.0073 ± 0.0020 mg N₂O m⁻² h⁻¹) > MM (0.0026 ± 0.0011 mg N₂O m⁻² h⁻¹). Temporal variations of N₂O emissions were related to the vegetations (Suaeda salsa, Phragmites australis, and Tamarix chinensis) and the limited C and mineral N in soils during summer and autumn and the frequent freeze/thaw cycles in soils during spring and winter, while spatial variations were mainly affected by tidal fluctuation and plant composition at spatial scale. This study indicated the importance of seasonal N₂O contributions (particularly during non-growing season) to the estimation of local N₂O inventory, and highlighted both the large spatial variation of N₂O fluxes across the coastal marsh (CV = 158.31 %) and the potential effect of exogenous nitrogen loading to the Yellow River estuary on N₂O emission should be considered before the annual or local N₂O inventory was evaluated accurately.

The main objective of this work was the development of a new modelling tool for quantification of human exposure to traffic-related air pollution within distinct microenvironments by using a novel approach for trajectory analysis of the individuals. For this purpose, mobile phones with Global Positioning System technology have been used to collect daily trajectories of the individuals with higher temporal resolution and a trajectory data mining, and geo-spatial analysis algorithm was developed and implemented within a Geographical Information System to obtain time–activity patterns. These data were combined with air pollutant concentrations estimated for several microenvironments. In addition to outdoor, pollutant concentrations in distinct indoor microenvironments are characterised using a probabilistic approach. An example of the application for PM2.5 is presented and discussed. The results obtained for daily average individual exposure correspond to a mean value of 10.6 and 6.0–16.4 μg m⁻³in terms of 5th–95th percentiles. Analysis of the results shows that the use of point air quality measurements for exposure assessment will not explain the intra- and inter-variability of individuals’ exposure levels. The methodology developed and implemented in this work provides time-sequence of the exposure events thus making possible association of the exposure with the individual activities and delivers main statistics on individual’s air pollution exposure with high spatio-temporal resolution.

Butyltin (BT) contamination was evaluated in hermit crabs from 25 estuaries and in sediments from 13 of these estuaries along about 2,000 km of the Brazilian coast. BT contamination in hermit crabs ranged from 2.22 to 1,746 ng Sn g⁻¹of DBT and 1.32 to 318 ng Sn g⁻¹of TBT. In sediment samples, the concentration also varied widely, from 25 to 1,304 ng Sn g⁻¹of MBT, from 7 to 158 ng Sn g⁻¹of DBT, and from 8 to 565 ng Sn g⁻¹of TBT. BTs are still being found in surface sediments and biota of the estuaries after the international and Brazilian bans, showing heterogeneous distribution among and within estuaries. Although hermit crabs were previously tested as an indicator of recent BT contamination, the results indicate the presence of contamination, probably from resuspension of BTs from deeper water of the estuary.

Microbial community composition and metabolic potential have been explored in petroleum-hydrocarbon-contaminated sludge of an oil storage facility. Culture-independent clone library-based 16S rRNA gene analyses revealed that the bacterial community within the sludge was dominated by the members of β-Proteobacteria (35 %), followed by Firmicutes (13 %), δ-Proteobacteria (11 %), Bacteroidetes (10 %), Acidobacteria (6 %), α-Proteobacteria (3 %), Lentisphaerae (2 %), Spirochaetes (2 %), and unclassified bacteria (5 %), whereas the archaeal community was composed of Thermoprotei (54 %), Methanocellales (33 %), Methanosarcinales/Methanosaeta (8 %) and Methanoculleus (1 %) members. Methyl coenzyme M reductase A (mcrA) gene (a functional biomarker) analyses also revealed predominance of hydrogenotrophic, methanogenic Archaea (Methanocellales, Methanobacteriales and Methanoculleus members) over acetoclastic methanogens (Methanosarcinales members). In order to explore the cultivable bacterial population, a total of 28 resident strains were identified and characterized in terms of their physiological and metabolic capabilities. Most of these could be taxonomically affiliated to the members of the genera Bacillus, Paenibacillus, Micrococcus, Brachybacterium, Aerococcus, and Zimmermannella, while two strains were identified as Pseudomonas and Pseudoxanthomonas. Metabolic profiling exhibited that majority of these isolates were capable of growing in presence of a variety of petroleum hydrocarbons as sole source of carbon, tolerating different heavy metals at higher concentrations (≥1 mM) and producing biosurfactant during growth. Many strains could grow under a wide range of pH, temperature, or salinity as well as under anaerobic conditions in the presence of different electron acceptors and donors in the growth medium. Correlation between the isolates and their metabolic properties was estimated by the unweighted pair group method with arithmetic mean (UPGMA) analysis. Overall observation indicated the presence of diverse groups of microorganisms including hydrocarbonoclastic, nitrate reducing, sulphate reducing, fermentative, syntrophic, methanogenic and methane-oxidizing bacteria and Archaea within the sludge community, which can be exploited for in situ bioremediation of the oily sludge.

Bladder cancer is a significant disease, the rates of which have increased over the few last years. However, its etiology remains as yet undefined. Cadmium, a widespread environmental carcinogen that has received considerable interest, presents evidence as a possible cause of bladder cancer. A literature review was conducted from the years 1984–2013 to study the accumulated evidence for cadmium as a possible cause of bladder cancer, including routes of cadmium exposure, accumulation, toxicity, carcinogenicity, and evidence from epidemiological and experimental studies. Special reference is devoted to cadmium nephrotoxicity, which illustrates how cadmium exerts its effects on the transitional epithelium of the urinary tract. Mechanisms of carcinogenesis are discussed. The effects of cadmium on gene expression in urothelial cells exposed to cadmium are also addressed. Despite different methodologies, several epidemiologic and nephrotoxicity studies of cadmium indicate that occupational exposure to cadmium is associated with increased risk of bladder cancer and provide additional evidence that cadmium is a potential toxic element in urothelial cells. In vitro studies provide further evidence that cadmium is involved in urothelial carcinogenesis. Animal studies encounter several problems such as morphology differences between species. Among the complex mechanisms of cadmium carcinogenesis, gene expression deregulation is the subject of recent studies on bladder cadmium-induced carcinogenesis. Further research, however, will be required to promise a better understanding of the mechanisms underlying cadmium carcinogenesis and to establish the precise role of cadmium in this important malignancy.

Inhibition of nitrification by four typical pollutants (acrylonitrile, acrylic acid, acetonitrile and cyanide) in acrylonitrile wastewater was investigated. The inhibitory effect of cyanide on nitrification was strongest, with a 50% inhibitory concentration of 0.218 mg·gVSS⁻¹ being observed in a municipal activated sludge system. However, the performance of nitrification was recovered when cyanide was completely degraded. The nitrification, which had been inhibited by 4.17 mg·gVSS⁻¹ of free cyanide for 24 h, was recovered to greater than 95% of that without cyanide after 10 days of recovery. To overcome cyanide inhibition, cyanide-degrading bacteria were cultivated in a batch reactor by increasing the influent cyanide concentration in a stepwise manner, which resulted in an increase in the average cyanide degradation rate from 0.14 to 1.01 mg CN⁻·gVSS⁻¹·h⁻¹ over 20 days. The cultured cyanide-degrading bacteria were shaped like short rods, and the dominant cyanide-degrading bacteria strain was identified as Pseudomonas fluorescens NCIMB by PCR.

Well-defined, uniform bismuth vanadate (BiVO₄) microcolumns were synthesized through a refined hydrothermal route. During the fabrication process, a detailed orthogonal design on the synthetic conditions was performed, aiming to optimize the experimental parameters to produce BiVO₄materials (BiVO₄(Opt.)) with the most prominent visible-light-driven photocatalytic efficiency, where the catalytic activities of the synthesized materials were evaluated via the decolorization of methylene blue under visible light irradiation. The BiVO₄(Opt.) were then targetedly produced according to the determined optimal conditions and well characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, ultraviolet and visible diffuse-reflectance spectroscopy and photoluminescence spectroscopy. Compared with the commercial P25-TiO₂photocatalysts, the as-synthesized BiVO₄(Opt.) displayed superior visible-light-driven photocatalytic activities for the degradation of metronidazole-contained wastewater with the presence of H₂O₂. The degradation efficiency of metronidazole reached up to 70 % within 180 min, leading to a brief speculation on the possibly major steps of the visible-light-driven photocatalytic process. The current study provides a distinctive route to design novel shaped BiVO₄architectures with advanced photocatalytic capacities for the treatment of organic pollutants in the aqueous environment.

Interspecific comparison in metals and PAHs profile in three lichen species, Flavoparmelia caperata, Phaeophyscia hispidula and Pyxine sorediata, were studied in different altitudinal gradients of the Western Himalayas. The species collected from 14 sites, enroute from Dehradun to Morinda (243 Km) including the trekking route 42 Km from Taluka to Morinda having an altitudinal gradient between 850–3,750 m, were analysed for their metals and PAHs. The species showed similar metal as well as PAHs profile under similar altitudinal gradients in the sequence of F. caperata > P. hispidula > P. sorediata. The difference in pollutant concentrations within each lichen species may be related to intrinsic attributes of the species, such as thallus morphology and the presence of lichen substances which are responsible for the sensitivity and accumulation potential of a particular species. Novelty of the present study lies on the fact that all the species show a similar efficiency of reflecting the environmental condition of the area, albeit the coefficient values of individual species for individual pollutant obtained by three-factor ANOVA revealed that the bioaccumulation affinity of F. caperata is significantly higher than P. hispidula and P. sorediata. For individual metals, F. caperata has a higher affinity for Al, Cr, Fe, Pb and Zn while P. hispidula has a significant positive affinity for Fe and Pb. PCA analysis of sites with respect to pollutant revealed the segregation of sites based on source and distance. Combining the bioaccumulation potential parameters along with geostatistical (GIS) techniques establishes that F. caperata species is a better accumulator of metals and PAHs in comparison to P. hispidula and P. sorediata in the temperate regions of the Himalaya.

To collect a large data set regarding the occurrence of organic substances in sediment, this study presents the examination of 20 micropollutants, as a national survey. The list of target compounds contains two alkylphenols, three polycyclic aromatic hydrocarbons (PAHs) not commonly included in monitoring programmes, six pesticides or metabolites, five pharmaceutical compounds, two hormones, one UV filter and bisphenol A. The selective and sensitive analytical methods, based on quick, easy, cheap, effective, rugged, and safe (QuEChERS) sample preparation followed by liquid chromatography-tandem mass spectrometry (LC-MS/MS) or gas chromatography-time-of-flight mass spectrometry (GC-ToF-MS), allow the quantification at limits comprised between 0.5 and 23 ng/g, depending on the compound. The paper summarizes the analytical results from 154 sampling points. Of the 20 target compounds, 9 were determined at least once, and the sediments contained a maximum of 7 substances. The most frequently detected were PAHs (frequency, 77 %; max., 1,400 ng/g). The pharmaceutical compounds, hormones and pesticides were rarely detected in the samples; the most frequently detected was carbamazepine (frequency, 6 %; max., 31 ng/g). In some cases, the levels of PAHs and bisphenol A exceed the predicted no-effect concentration (PNEC) values.