Heavy metal pollution is a common environmental problem all over the world. The purpose of the research is to examine the applicability of bagasse fly ash (BFA)—an agricultural waste of sugar industry used for the synthesis of zeolitic material. The zeolitic material are used for the uptake of Pb(II) and Cd(II) heavy metal. Bagasse fly ash is used as a native material for the synthesis of zeolitic materials by conventional hydrothermal treatment without (conventional zeolitic bagasse fly ash (CZBFA)) and with electrolyte (conventional zeolitic bagasse fly ash in electrolyte media (ECZBFA)) media. Heavy metal ions Pb(II) and Cd(II) were successfully seized from aqueous media using these synthesized zeolitic materials. In this study, the zeolitic materials were well characterized by different instrumental methods such as Brunauer–Emmett–Teller, XRF, Fourier transform infrared spectroscopy, powder X-ray diffraction, and scanning electron microscopic microphotographs. The presence of analcime, phillipsite, and zeolite P in adsorbents confirms successful conversion of native BFA into zeolitic materials. Seizure modeling of Pb(II) and Cd(II) was achieved by batch sorption experiments, isotherms, and kinetic studies. These data were used to compare and evaluate the zeolitic materials as potential sorbents for the uptake of heavy metal ions from an aqueous media. The Langmuir isotherm correlation coefficient parameters best fit the equilibrium data which indicate the physical sorption. Pseudo-second-order and intra-particle diffusion model matches best which indicates that the rate of sorption was controlled by film diffusion. The column studies were performed for the practical function of sorbents, and breakthrough curves were obtained, which revealed higher sorption capacity as compared to batch method. Synthesized zeolitic material (CZBFA and ECZBFA), a low-cost sorbent, was proven as potential sorbent for the uptake of Pb(II) and Cd(II) heavy metal ions.

This study used the enzymes extracted from an atrazine-degrading strain, Arthrobacter sp. DNS10, which had been immobilized by sodium alginate to rehabilitate atrazine-polluted soil. Meanwhile, a range of biological indices were selected to assess the ecological health of contaminated soils and the ecological security of this bioremediation method. The results showed that there was no atrazine detected in soil samples after 28 days in EN + AT (the soil containing atrazine and immobilized enzyme) treatment. However, the residual atrazine concentration of the sample in AT (the soil containing atrazine only) treatment was about 5.02 ± 0.93 mg kg(-1). These results suggest that the immobilized enzyme exhibits an excellent ability in atrazine degradation. Furthermore, the immobilized enzyme could relieve soil microbial biomass carbon and soil microbial respiration intensity to 772.33 ± 34.93 mg C kg(-1) and 5.01 ± 0.17 mg CO2 g(-1) soil h(-1), respectively. The results of the polymerase chain reaction-degeneration gradient gel electrophoresis experiment indicated that the immobilized enzyme also could make the Shannon-Wiener index and evenness index of the soil sample increase from 1.02 and 0.74 to 1.51 and 0.84, respectively. These results indicated that the immobilized enzymes not only could relieve the impact from atrazine on the soil, but also revealed that the immobilized enzymes did no significant harm on the soil ecological health.

Because of the continuous production of large amount of waste tires, the disposal of waste tires represents a major environmental issue throughout the world. This paper reports the utilization of waste tires (hard-to-dispose waste) as a precursor in the production of activated carbons (pollution-cleaning adsorbent). In the preparation of activated carbon (AC), waste rubber tire (WRT) was thermally treated and activated. The tire-derived activated carbon was characterized by means of scanning electron microscope, energy-dispersive X-ray spectroscopy, FTIR spectrophotometer, and X-ray diffraction. In the IR spectrum, a number of bands centred at about 3409, 2350, 1710, 1650, and 1300–1000 cm⁻¹ prove the present of hydroxyl and carboxyl groups on the surface of AC in addition to C═C double bonds. The developed AC was tested and evaluated as potential adsorbent removal of chromium (III). Experimental parameters, such as contact time, initial concentration, adsorbent dosage and pH were optimized. A rapid uptake of chromium ions was observed and the equilibrium is achieved in 1 h. It was also found that the adsorption process is pH dependent. This work adds to the global discussion of the cost-effective utilization of waste rubber tires for waste water treatment.

As part of a large study on assessing the impact of environmental contaminants in Indian avifauna, the presence of organochlorine pesticides (OCPs) in liver tissues of 16 species of birds collected from Ahmedabad, India during 2005–2007 was quantified. The higher concentrations of total organochlorine pesticides were detected in livers of shikra Accipiter badius (3.43 ± 0.99 μg/g wet wt) and the lower levels in white ibis Pseudibis papillosa (0.02 ± 0.01 μg/g wet wt). Marked differences in the concentrations of total OCPs occurred among species (p < 0.05). Concentrations of DDT and its metabolites, hexachlorocyclohexane (HCH) and isomers, dieldrin, and heptachlor epoxide were lower than the concentrations reported for various species of birds in India. Accumulation pattern of organochlorine pesticides in birds was, in general, in the order HCH > DDT > heptachlor epoxide > dieldrin. Among various pesticides analyzed, p,p′-DDE and β-HCH contributed maximum towards the total OCPs and study indicates the continuous use of lindane and DDT for agriculture and public health purpose, respectively. Although no serious threat is posed by any of the organochlorine pesticides detected in the present study species, continued monitoring is recommended.

Both dissolved organic matters (DOM) and natural biofilms are important substances in controlling the behavior of trace metals in natural aquatic environments. In this study, ethylenediaminetetraacetic acid (EDTA) was selected as a typical DOM to investigate the effect of DOM on the adsorption of trace metals to the biofilms in natural waters. The adsorption of Cd to biofilms, including adsorption isotherm at a fixed pH (pH = 6.0) and pH-edge adsorption (pH ranging from 4.3 to 9.0) with different adsorption sequences, was determined without EDTA and in the presence of EDTA ([EDTA] = 0.5 μmol/L for isotherms measurement and [EDTA] = 0.5 and 2.0 μmol/L for pH-dependent adsorption). The presence of EDTA generally decreased the adsorption of Cd, and the effect was determined by solution pH, concentration of EDTA, and adsorption sequence. Higher concentration or higher pH usually resulted in a more significant decrease. The influence of adsorption sequence on the effect of EDTA was insignificant in lower pH range, while the adsorption usually decreased in the order of Cd only adsorption > Cd first adsorption > EDTA first adsorption ≈ simultaneous adsorption in higher pH range. The effect of EDTA could be attributed to the conversion of Cd speciation, the competition with the biofilms for Cd, and the dissolution of Mn oxides from the biofilms. EDTA affected the adsorption of Cd to natural biofilms, and the effect could be fairly significant. The role of Mn oxides in determining the behavior of trace metals might be underestimated.

Diflubenzuron (DFB) is an insecticide commonly used to control forest pests. The objectives of this study were to assess the effect of diflubenzuron on the development of Pinus pinaster seedlings and Pisolithus tinctorius under laboratory conditions and to study the possible protective role of this ectomycorrhizal fungus against the effects of diflubenzuron. In vitro experiments revealed that diflubenzuron inhibited fungal growth at all tested concentrations (0.01, 0.1, 1, 10 and 100 mg L⁻¹). Root growth was inhibited at the two highest diflubenzuron concentrations. The activity of the antioxidant defence system of non-inoculated P. pinaster increased at 1 and 10 mg DFB kg⁻¹ substrate, and inoculation increased the threshold to the highest concentration. The protective role of the ectomycorrhizal fungus was seen in the increase of CAT activity. This study revealed that despite causing no mortality, diflubenzuron has the ability to cause sub-lethal damage to P. pinaster. The disproportionate use of this insecticide may lead to higher amounts of its residues in soil and the biosphere, endangering trees, fungi and their symbiosis.

The pretreatment methods for enhancing biogas production from oat straw under study include hot maceration, steam explosion, and pressure shockwaves. The micropore area (9, 55, and 64 m(2) g(-1)) inhibitor formations (0, 15, and 0 mL L(-1)) as well as the overall methane yields (67, 179, and 255 CH4 VS t(-1)) were robustly analyzed. It was confirmed that the operating conditions of the steam explosion must be precisely tailored to the substrate. Furthermore, it was beneficial to prepend the hot maceration before the steam explosion and the pressure shockwaves. The second alternative may give increased methane yields (246 in comparison to 273 CH4 VS t(-1)); however, the application of pressure shockwaves still faces limitations for deployment on a commercial scale.

The aims of this paper were to quantify the heavy metal concentrations in street dust of small towns in Shanghai suburban area compared with those in urban area, and examine their seasonal and spatial variations, and to assess their risks to water environment and local populations. Street dust samples were collected from three small towns and urban area in Shanghai in different seasons. Levels of heavy metals were determined by atomic adsorption spectrophotometer analyzer. The method of potential ecological risk index and the health risk assessment model were used to evaluate the potential risks to water bodies and local residents, respectively. The mean metal concentrations in street dust of small towns were far above soil background values but still lower than those in the urban area. No significant seasonal change was observed except for Cr, Ni, and Zn concentrations. Higher metal concentrations tended to be located in central area of towns and township roads. The integrated metal contamination was high and posed a strong potential ecological risk. Children had greater health risk than adults. The carcinogenic risk probabilities were under the acceptable level. The hazard index values to children were close to the safe level. Street dust from the studied area has been contaminated by heavy metals. The contamination of these elements is related more to the pollution source than seasonal change. The combination of the six metals may threaten the water environment and has non-cancer health risk to children, but not to adults.

Arsenic contamination of groundwater has been called the largest mass poisoning calamity in human history and creates severe health problems. The effective adsorbents are imperative in response to the widespread removal of toxic arsenic exposure through drinking water. Evaluation of arsenic(V) removal from water by weak-base anion exchange adsorbents was studied in this paper, aiming at the determination of the effects of pH, competing anions, and feed flow rates to improvement on remediation. Two types of weak-base adsorbents were used to evaluate arsenic(V) removal efficiency both in batch and column approaches. Anion selectivity was determined by both adsorbents in batch method as equilibrium As(V) adsorption capacities. Column studies were performed in fixed-bed experiments using both adsorbent packed columns, and kinetic performance was dependent on the feed flow rate and competing anions. The weak-base adsorbents clarified that these are selective to arsenic(V) over competition of chloride, nitrate, and sulfate anions. The solution pH played an important role in arsenic(V) removal, and a higher pH can cause lower adsorption capacities. A low concentration level of arsenic(V) was also removed by these adsorbents even at a high flow rate of 250–350 h⁻¹. Adsorbed arsenic(V) was quantitatively eluted with 1 M HCl acid and regenerated into hydrochloride form simultaneously for the next adsorption operation after rinsing with water. The weak-base anion exchange adsorbents are to be an effective means to remove arsenic(V) from drinking water. The fast adsorption rate and the excellent adsorption capacity in the neutral pH range will render this removal technique attractive in practical use in chemical industry.