Despite the mercury (Hg) control measures adopted by the international community, Hg still poses a significant risk to ecosystem and human health. This is primarily due to the ability of atmospheric Hg to travel intercontinentally and contaminating terrestrial and aquatic environments far from its natural and anthropogenic point sources. The issue of Hg pollution is further complicated by its unique physicochemical characteristics, most noticeably its multiple chemical forms that vary in their toxicity and environmental mobility. This meant that most of the risk evaluation protocols developed for other metal(loid)s are not suitable for Hg. Soil is a major reservoir of Hg and a key player in its global cycle. To fully assess the risks of soil Hg it is essential to estimate its bioavailability and/or availability which are closely linked to its toxicity. However, the accurate determination of the (bio)-available pools of Hg in soils is problematic, because the terms ‘bioavailable’ and ‘available’ are ill-defined. In particular, the term ‘bioavailable pool’, representing the fraction of Hg that is accessible to living organisms, has been consistently misused by interchanging with other intrinsically different terms e.g. mobile, labile, reactive and soluble pools. A wide array of physical, chemical, biological and isotopic exchange methods were developed to estimate the (bio)-available pools of Hg in soil in an attempt to offer a plausible assessment of its risks. Unfortunately, many of these methods do not mirror the (bio)-available pools of soil Hg and suffer from technical drawbacks. In this review, we discuss advantages and disadvantages of methods that are currently applied to quantify the (bio)-availability of Hg in soils. We recommended the most feasible methods and give suggestions how to improve the determination of (bio)-available Hg in soils.

Short-chain chlorinated paraffin (SCCP) concentrations in 419 food samples (from 59 species) from Republic of Korea were determined. The SCCP concentrations and lipid contents in whole foods positively correlated and the highest SCCP concentration (891 ng/g wet weight) was observed in fats and oils. The SCCP concentrations were higher in benthic fish/shellfish and demersal fish than other fish and shellfish. The SCCP concentrations were higher in duck meat and eggs than meat and eggs of other species. The chlorine-based congener group patterns were related to the lipid contents of the foods. SCCPs in eggs (high lipid content) were dominated by more-chlorinated SCCPs (particularly Cl₈-SCCPs, which contributed 43% of the total) but SCCPs in seaweed (low lipid content) were dominated by less-chlorinated SCCPs (particularly Cl₆-SCCPs, which contributed 46%). Dietary SCCP intakes were calculated using the median SCCP concentrations and estimated 888 and 781 ng/kg/d for male and female Korean adults, respectively. The predominant contributing foods to SCCP dietary exposure differed according to sex and age. Dairy products contributed most (about 50%) for infants/children (1–5 y old), but meat and dairy products contributed most for adult males and females, respectively. Grain contributed most for ≥65 y old.

The 2011 spill at platforms B and C of the Penglai 19-3 oil field in the Bohai Sea has been the worst oil spill accident in China. To assess long-term effects, a comprehensive monitoring program of chemical and biological variables (within a 2.2 km radius of the spill site) was conducted five years after the spill. Comparison of nutrient, Chl-a and oil concentrations in seawater, TOC, PAHs, heavy metals concentrations within the sediments, and the abundance and biomass of macrobenthic organisms to values obtained before and after the oil spill in previous studies indicate habitat recovery has occurred within the Bohai Sea following the episodic oil release. Observed elevated oil concentration in the water column and higher concentrations of two heavy metals, five PAHs, TOC, TOC/TN and lower values of δ¹³C, together with a reduction in macrobenthic biomass in near-field samples, suggest the influence of contaminants from chronic releases of oil and operational waste discharges within the vicinity of the oil platforms.

Glyphosate-based herbicides, the most extensively used herbicides in the world, are available in an enormous number of commercial formulations with varying additives and adjuvants. Here, we study the effects of one such formulation, Credit41, in two genetically diverse yeast strains. A quantitative trait loci (QTL) analysis between a sensitive laboratory strain and a resistant strain linked mitochondrial function to Credit41 resistance. Two genes encoding mitochondrial proteins identified through the QTL analysis were HFA1, a gene that encodes a mitochondrial acetyl CoA carboxylase, and AAC3, which encodes a mitochondrial inner membrane ATP/ADP translocator. Further analysis of previously studied whole-genome sequencing data showed that, although each strain uses varying routes to attain glyphosate resistance, most strains have duplications of mitochondrial genes. One of the most well-studied functions of the mitochondria is the assembly of Fe–S clusters. In the current study, the expression of iron transporters in the transcriptome increased in cells resistant to Credit41. The levels of iron within the cell also increased in cells exposed to Credit41 but not pure glyphosate. Hence, the additives in glyphosate-based herbicides have a significant contribution to the negative effects of these commercial formulations on biological systems.

Microcystins (MCs) are toxins produced during cyanobacterial blooms. They reach soil and translocated to plants through irrigation of agricultural land with water from MC-impacted freshwater systems. To date we have good understanding of MC effects on plants, but not for their effects on plant-associated microbiota. We tested the hypothesis that MC-LR, either alone or with other stressors present in the water of the Karla reservoir (a low ecological quality and MC-impacted freshwater system), would affect radish plants and their rhizospheric and phyllospheric microbiome. In this context a pot experiment was employed where radish plants were irrigated with tap water without MC-LR (control) or with 2 or 12 μg L⁻¹ of pure MC-LR (MC2 and MC12), or water from the Karla reservoir amended (12 μg L⁻¹) or not with MC-LR. We measured MC levels in plants and rhizospheric soil and we determined effects on (i) plant growth and physiology (ii) the nitrifying microorganisms via q-PCR, (ii) the diversity of bacterial and fungal rhizospheric and epiphytic communities via amplicon sequencing. MC-LR and/or Karla water treatments resulted in the accumulation of MC in taproot at levels (480–700 ng g⁻¹) entailing possible health risks. MC did not affect plant growth or physiology and it did not impose a consistent inhibitory effect on soil nitrifiers. Karla water rather than MC-LR was the stronger determinant of the rhizospheric and epiphytic microbial communities, suggesting the presence of biotic or abiotic stressors, other than MC-LR, in the water of the Karla reservoir which affect microorganisms with a potential role (i.e. pathogens inhibition, methylotrophy) in the homeostasis of the plant-soil system. Overall, our findings suggest that MC-LR, when applied at environmentally relevant concentrations, is not expected to adversely affect the radish-microbiota system but might still pose risk for consumers’ health.

Sites contaminated by mercury (Hg) from artisanal small-scale gold mine tailings have been found near agricultural land. For the active implementation of the Minamata Convention on Mercury, development of technology for the remediation of Hg contaminated sites is required. This study examined the conditions for the thermal treatment of Hg contaminated tailings at reduced temperature by introducing SnCl₂ as an additive. Thermogravimetric analysis (TGA) was used to identify the possibility of converting typical Hg compounds (HgO, HgS) in the environment to HgCl₂. The operation conditions for thermal treatment such as temperature, retention time, and ratio of [Cl₂]/[Hg] were derived from lab scale experiments using commercial Hg compounds (HgO, HgS), additive (SnCl₂), and tailings. The tailings with Hg content of 26.39 mg-Hg/kg were reduced to 3.87 mg-Hg/kg and 4.57 μg-g/L of leaching concentration through the application of the Korea standard leaching test. Both concentrations were below the standard limit of soil pollution and hazardous waste classification criteria. The sequential extraction procedure was applied to evaluate the Hg stability of residual tailings. The results show that this method will be effective for remediation of small scale Hg contaminated areas.

The radial transport of cadmium (Cd) is essential for Cd influx in roots. The role of radial transport pathway on the Cd translocation from root to shoot among wheat genotypes are still poorly understood. This study explored the role of apoplastic and symplastic pathway on root Cd uptake and root-to-shoot translocation in Zhenmai 10 (ZM10, high Cd in grains) and Aikang 58 (AK58, low Cd in grains). Under Cd treatment, the deposition of Casparian strips (CSs) and suberin lamellae (SL) initiated closer to the root apex in ZM10 than that in AK58, which resulted in the lower Cd concentration in apoplastic fluid of ZM10. Simultaneously, Cd-induced expression levels of genes related to Cd uptake in roots were significantly higher in AK58 by contrast with ZM10, contributing to the symplastic Cd accumulation in AK58 root. Moreover, the addition of metabolic inhibitor CCCP noticeably decreased the Cd accumulation in root of both genotypes. Intriguingly, compared to ZM10, greater amounts of Cd were sequestrated in the cell walls and vacuoles in roots of AK58, limiting the translocation of Cd from root to shoot. Furthermore, the elevated TaHMA2 expression in ZM10 indicates that ZM10 had a higher capacity of xylem loading Cd than AK58. All of these results herein suggest that the radial transport is significant for Cd accumulation in roots, but it cannot explain the difference in root-to-shoot translocation of Cd in wheat genotypes with contrast Cd accumulation in grains.

Antibiotic resistance genes (ARGs) and antibiotic resistant bacteria (ARB) have become a critical global public health issue in this century. There is increasing evidence for the presence and transmission of ARGs by air transmission. In this research, ARGs and ARB in air conditioner filter dust (AC dust) and urine samples from 55 kindergarten children in 17 kindergartens and nearby 10 soil samples in Hong Kong were analyzed. The results showed the presence of 16 ARG subtypes and the mobile genetic element (MGE) intI1 in AC dust, and 12 ARG subtypes in the soil samples. ARGs presenting resistance to sulfonamide (6.9 × 10⁻³–0.17) (expressed as relative abundance of the 16 S rRNA genes) were most abundant followed by macrolides (1.8 × 10⁻³–3.3 × 10⁻²), sul1, sul2 (sulfonamide), ermF (macrolides) and intI1 genes in AC dust in 17 kindergartens. For soil samples, 12 ARG subtypes and the intI1 were detected, and the genes providing resistance to sulfonamide (1.6 × 10⁻³–2.7 × 10⁻¹) were the most abundant ARGs in the 10 soil samples, followed by tetracycline (ND–1.4 × 10⁻²). Multi-resistant bacteria with sul1, sul2, intI1, or tetQ were detected in all AC dust samples and some urine samples. Based on bacterial genera and ARG co-occurrence network analysis and Hong Kong’s special geographical location and cultural environment, there might be two origins for the ARGs detected in the kindergartens: β-lactam/macrolide ARGs mainly derived from human medicine use and tetracycline/sulfonamide ARGs mainly from other areas, as well as IntI1 may play a role in the spread of ARGs in Hong Kong. The widely detection of ARGs in AC dust in kindergartens in Hong Kong highlights the need for the improvement of management measures.

Estimates of the brown carbon (BrC) absorption and their contribution to light absorption in ambient aerosols are poorly understood. The existing approaches to apportion light absorption into black carbon (BC) and BrC mainly use the assumption of fixed angstrom absorption exponent (AAE) for BC (1.0), which is not always true for ambient aerosols. Besides, these estimates are seldom validated, leaving significant uncertainty with derived values. Also, BrC absorption studies are largely focused on aqueous extracts, which truly do not represent the aerosolized form, hence the relationship between aqueous extracts and aerosolized form is a subject of research. With this in mind, we collected ambient PM₂.₅ filter samples at Lumbini, Nepal, at the northern edge of the Indo-Gangetic Plains (IGP) during winter 2017-18. These samples were analyzed for different compositions of carbonaceous aerosol and optical properties. BC and BrC absorptions were derived using a preexisting simplified two-component model but with “improved conditions”. Although BC dominated spectral absorption, BrC contribution for the carbonaceous aerosol absorption increased substantially at ultraviolet wavelengths (example 14.8–53.6% at 365 nm). Further water-soluble BrC absorption value in aerosol was found to be higher by 1.8 times to that obtained in aqueous extracts. Water-soluble OC contributed ∼65% to OC loading and 50% to BrC absorption at 365 nm, indicated the equally important role of water-insoluble organics. Mass absorption efficiency (MAE) of water-soluble BrC in aerosol was found to be 1.7 m²/g, lower to water-insoluble by 2.2 times. High BC MAE was observed which showed positive dependence on secondary coating. Sample collected during events with fog droplets showed a reduction in carbonaceous components loading and light absorption but enhancement in MAE for BrC and BC, signifying that aqueous processing can significantly modify the aerosol optical properties.

Biodigested coffee processing wastewater (CPW) presents a high organic load and does not meet the limits imposed by legislation (namely in Brazil) for discharge into water bodies. Anaerobic digestion generally cannot provide a satisfactory organic matter reduction in CPW as a significant fraction of recalcitrant compounds still persists in the treated effluent. So, this study aims to find alternative ways to remove refractory organic compounds from this wastewater in order to improve the biodegradability and reduce the toxicity, which will allow its recirculation back into the anaerobic digester. Three treatment approaches (Fenton’s oxidation - Approach 1, Coagulation/flocculation (C/F) - Approach 2, and the combination of C/F with Fenton’s process - Approach 3) were selected to be applied to the biodigested CPW in order to achieve that objective.The application of the Fenton process under the optimal operating conditions (initial pH = 5.0; T = 55 °C, [Fe³⁺] = 1.8 g L⁻¹ and [H₂O₂] = 9.0 g L⁻¹) increased the biodegradability (the BOD₅:COD ratio raised from 0.34 ± 0.02 in biodigested CPW to 0.44 ± 0.01 after treatment) and eliminated the toxicity (0.0% of Vibrio fischeri inhibition) along with moderate removals of organic matter (51.3%, 55.7% and 39.7% for total organic carbon – TOC, chemical oxygen demand – COD and biochemical oxygen demand - BOD₅, respectively). The implementation of a coagulation/flocculation process upstream from Fenton’s oxidation, under the best operating conditions (pH 10–11 and [Fe³⁺] = 250 mg L⁻¹), also allowed to slightly increase the biodegradability (from 0.34 to 0.47) and reduce the toxicity, whereas providing a higher removal of organic matter (TOC = 76.2%, COD = 76.5 and BOD₅ = 66.3% for both processes together). Approach 1 and Approach 3 showed to be the best ones, implying similar operating costs (∼74 R$ m⁻³/∼17 € m⁻³) and constitute an attractive option for managing biodigested CPW.