Noise pollution has detrimental negative externalities which Scholars have attempted to evaluate the noise externalities economically, but environmental pricing has not been considerably applied to assess economically noise pollution. The present research aims to quantify the economic cost of noise pollution using the environmental pricing framework proposed by the Delft University. To realize environmental pricing frameworks, this study estimates the costs of noise pollution in the area of Tehran metropolitan. The study attempts to apply the environmental prices framework to local conditions with the assistance of GDP and Gini coefficient. The results demonstrate that the Localized Environmental Prices (LEP) mechanism is capable of internalizing environmental prices. The research indicates that LEP demonstrates the significance of noise pollution necessity to reduction. The results of present investigation show that the sum of environmental prices for noise pollution at Tehran is 56271911 €/year. It also offers a useful foundation for planners and policymakers to make more rational decisions.

Decision-making under uncertainty refers to a dilemma when a decision-maker is aware of a variety of potential natural states but lacks adequate information to assign any probabilities of occurrence to them. The uncertainty related to the input parameters is one of the main issues in the majority of decision-making situations. Uncertainty may produce some irrational results, which could make the decision-making process even more challenging. To overcome this challenge, a fuzzy extension of Best-Worst Method (BWM) has been proposed, using trapezoidal fuzzy sets, to combine the advantages of a reduced number of pair-wise comparisons and easy handling of ambiguity. The criteria and alternatives have been evaluated by the proposed Trapezoidal Fuzzy Best-Worst Method (TrFBWM), where the weight of each element is represented by a Trapezoidal Fuzzy Number (TrFN). To verify the coherence of judgment, the consistency ratio is evaluated for TrFBWM. The proposed method is then applied to the location selection of a water treatment plant along the bank of the Brahmaputra river in Assam. The obtained results are compared to one previous work and found that the outcomes of the proposed method indicate a good agreement with that. The outcomes of the study provide useful insights for selecting a suitable location for a surface water treatment plant which can also be extended to other service facilities.

The application of the electro-coagulation process to the identified contaminated groundwater at Abala community, a suburb of Ilorin metropolis in Kwara state, Nigeria, is the subject of this study. The groundwater samples were electro-coagulated in a batch reactor of 2.5L containing 1 litre volume of contaminated groundwater for 1 hour per run using a DC power supply ranging from 10v to 20v at constant current 5amp and 2amp to 6amp at constant voltage 10v using graphite electrodes. The results revealed that electro-coagulation process can reduce turbidity, TDS, Electrical Conductivity, BOD, TOC, COD, and color by 97.3 %, 91.2 %, 91.1 %, 96 %, 99.7%, 99.7%, 79.9%, and 82.96 %, respectively. Through Atomic Absorption spectroscopy analytical study, the process also shows removal efficiency of Manganese, Iron, and Zinc of 82.96 percent, 70.0 percent, and 95.30 percent, respectively. The outcome of the electro-coagulation process met the World Health Organization (WHO), the United States Environmental Protection Agency (USEPA), and the Water Environment Partnership In Asia (WEPA) criteria for both drinking water and general industrial wastewater discharge guidelines. The electro-coagulation treatment for contaminated groundwater was efficient and effective, therefore it is recommended in this study for Nigerians.

Urban morphology impacts micro-climates, solar energy absorption, air flow, wind patterns, energy consumption, and air pollution concentration. Temperature control in public spaces reduces heat island formation, while ventilation corridors potentially improve air quality. However, despite the literature on airflow and urban tall buildings providing valuable insights, further research is needed to understand the complex relationship between airflow patterns and urban high-rise buildings. This research should consider factors such as landscape types, building height, density, and orientation. This research aims to examine airflow patterns in high-rise buildings that are influenced by nearby land use, which can impact ventilation and climate comfort. To investigate these objectives, we utilized the Universal Thermal Climate Index (UTCI) and Predicted Mean Vote Index (PMV) by conducting simulations using ENVI-met software. The results revealed that buildings with narrower widths have better wind warded front conditions, while those with an unfavorable wind angle or a narrow facade are less comfortable. Public spaces that face the wind benefit from improved ventilation. It is essential to consider the optimal arrangement, ventilation, and height of buildings to ensure the favorable airflow. Factors such as the placement of trees, the use of porous walls, water features such as fountains and sprinklers, and the local climate all contribute to creating better wind conditions. Investigating the reciprocal interaction between the landscape, high-rise buildings, and climate comfort could be considered in future research.

Removing environmental pollutants and preserving the environment is an important issue and many efforts have been made in this regard in recent years. In the present work, chromate ions were removed from aqueous solutions by ZnO/CuO acting as both adsorbent and catalyst. Metal oxide fabrication from metal organic framework is one of the most important and interesting scientific issues for the synthesis of high surface area materials. Here, we demonstrate ZnO/CuO synthesis from bimetallic Zn-Cu metal-organic framework (Zn(50)-Cu(50)-BTC) using temperature-programmed oxidation method. The adsorptive and catalytic removal procedure were optimized in terms of its batch efficiency using experimental designs. The effect of hole scavenger type was investigated, and the relationships between the effective important removal procedure parameters and chromate removal efficiency were analyzed through the response surface methodology (RSM) based on central composite design (CCD). The correlation coefficient (R2) and F values were 0.9883 and 74.81, respectively. Finally, simplex non-linear optimization was carried out and the optimal pH, ZnO/CuO amount and contact time were determined to be 2, 20 mg, and 17.5 min. Under these conditions, the predicted removal efficiency of 50 ppm chromate at a 95% confidence level was 98.1 ± 2.4%, which was very close to the recorded response (i.e. 99.4 ± 1.9%). The kinetic and isothermal profiles of the proposed ZnO/CuO, were thoroughly investigated under optimal conditions. The adsorption isotherm follow the Langmuir model and kinetics were found to be pseudo-second-order.

Numerous coagulants, including natural and chemical coagulants, have been examined in the context of water purification. The use of natural coagulants constitutes an affordable and eco-friendly method of purifying water. The main aim of the current study was represented by investigated the feasibility of coagulant extracted from Castanea Sativa Tree Leaves using three different salts and distilled water. The active coagulant component was extracted using 0.25, 0.5, and 1 M of NaCl and KCl, 0.025, 0.05, and 0.1 M of NaOH, and distilled water. Powdered Castanea Sativa Tree Leaves was also used as a coagulant. Jar tests were performed using synthetic turbid water, a turbidity level of 35 NTU to investigate the coagulants’ activity. The pH was measured to study the influence of a range of different pHs, coagulant doses and initial turbidity were also investigated to optimize the coagulation process. The highest level of activity was achieved using 0.5 ml/l of coagulant extracted with 0.5 M NaCl at pH level 8. Coagulant extracted using 0.05 M NaOH demonstrated the second highest level of activity. Poor coagulant activity was observed for the powdered Castanea Sativa Tree Leaves and distilled water extract. The protein content of the extracted coagulant was 0.322, 0.283, and 0.274 mg/ml using 0.05 M NaCl, 0.5 M NaOH, and 0.5 M KCl, respectively. The use of this natural coagulant was also found to moderately increase organic matter content in the treated water, which was proportional to protein contents of the extracts. Coagulation results were statistically examined using SigmaPlot 12.5 software.

Cong-red dye is a precursor of various products of cotton industry and its toxicity in the aquatic environment is a great concern. Present study was highlighted on the efficacy of the fish scale char (FSC) towards removal of congo red from aqueous solution. The prepared FSC was characterized by zero point charge (pHZPC), scanning electron micrograph with elemental analysis (SEM-EDX) and fourier transform infrared (FTIR). Based in the equilibrium and kinetic study, the Langmuir (R2 = 0.967) and Pseudo-second-order (R2 = 1.00) models are appropriate to describe the dye adsorption process. The randomness and exothermic nature of the system were confirmed by the negative values of both entropy and enthalpy, respectively. Finally, optimization by Response Surface Methodology (RSM) study revealed that the experimental data were nicely fitted with central composite design with very high F value (F = 1596.24, p < 0.0001). Perturbation plot suggested that congo-red dye removal is more sensitive with respect to biosorbent dose, pH and initial concentration. The exhausted adsorbent was regenerated with 0.5(M) NaOH solution. Therefore, it can be concluded that fish scale char could be a valuable materials towards purification of industrial effluent.

Phenols have attracted global interest in the sphere of environmental management due to their potential toxicity on human health. This study determined concentrations of three priority phenolic compounds in effluent and water of a local textile industry in Abeokuta, Nigeria.  During tie-dye production, triplicates of effluent, well water, stream and control water were collected three times from five points to give a total of forty-five samples. Physicochemical parameters of samples including temperature, pH, electrical conductivity (EC), total suspended solids (TSS) and total dissolved solids (TDS) were determined according to standard methods while the concentrations of the priority phenolic compounds (4-nitrophenol, 4-chloro-3-methylphenol and 2, 4-dinitrophenol) were determined using High Performance Liquid Chromatography equipped with Ultra-Violet detector (HPLC/UV). Data obtained were subjected to descriptive (mean and standard deviation) and inferential (ANOVA) statistics. pH, EC and TSS of effluent and water samples were higher than the permissible limits of World Health Organization (WHO) and Federal Environmental Protection Agency (FEPA) while temperature of the effluent samples and TDS of the well water samples were within standard values. Higher concentrations of the priority phenolic compounds occurred in effluent than water samples but 4-nitrophenol was below detection limit (DL) in water samples. Concentrations of 4-nitrophenol, 4-chloro-3-methylphenol and 2,4-dinitrophenol in effluent exceeded stipulated standard of WHO (0.01 mg/L) and water samples. High concentrations of phenols in water bodies at the local textile industry suggest uncontrolled discharge of effluent from the industry which could eventually reach surface and ground water with potential significant health implications to the populace.

Environmental threats from the accumulation of plastic trash are getting worse.  It is robust, lightweight, corrosion-resistant, affordable, and durable. Microorganisms play a significant role in protecting our environment by degrading plastic wastes that are harmful either naturally or by chemical modification.  The current study aims to investigate the biodegradation of synthetic polyethylene through the utilization of a laboratory bioreactor. Various types of additives were introduced to the soil samples before subjecting them to a 30-day UV treatment. The degradation of polyethylene was shown through a reduction in weight following a 24-week incubation period with certain bacterial strains. Experimental findings have revealed that models subjected to UV radiation exhibit the highest degree of vulnerability and degradation. Approximately 52% of polyethylene (PE) films underwent degradation when exposed to soil enhanced with peat moss. In contrast, only 40% and 45% of PE films were destroyed when subjected to garden soil that was untreated and treated with UV radiation, respectively. In contrast, the addition of husk resulted in a 48% to 53% reduction in weight for PE films that were buried for the same duration of the experiment.  The highest level of effectiveness was achieved by the disintegration of the plastic material that was introduced into the soil along with organic fertilizers, resulting in a value of 56.60%. The weight loss outcomes have been substantiated by the utilization of the Atomic Force Electron Microscope (AFM) images, which exhibited the highest magnitude in the experimental model using soil supplemented with fertilizers.

Microplastics can contaminate water owing to their small size. If aquatic biota consume microplastics, they disrupt their reproductive processes, digestive tracts, and development. This study aimed to identify microplastic waste from silkworms (Tubifex spp.) in the Brantas River. The study was conducted in a descriptive manner by collecting samples of microplastic waste from silkworms and examining the shape, type, amount, and percentage of microplastic abundance in the river. An FTIR test was used to determine the microplastic content. Using a Zeiss Axio Zoom.V16 at 50x magnification, microplastic particles from individual worms and worm samples were visually identified. Then, the 50% hot needle test was used to determine the composition of the plastic. A total of 263 microplastic particles were found in the worm samples. Silkworms (Tubifex spp.) in the Brantas River, Kediri City, were shown to contain four types of microplastics, namely fibers, filaments, fragments, and granules, which were dominated by filament particles with 49% filament content, 45% fiber, 5% fragments, and 1% granules. The microplastic polymers identified via FTIR were polyethylene and ethylene-polypropylene-diene copolymers. These microplastics can originate from plastic bags, used drinking bottles, rope fibers, and pieces of water hose, which are often found around the Brantas River. Silkworms found in the Brantas River contain microplastic waste from various pollution sources.